libopencm3

Files

T

Uwe Hermann 8f251e8a9d Some more file/path restructuring.

All #includes now explicitly use the "<libopencm3/stm32/rcc.h>" format.
If you want to get rid of the "libopencm3" prefix in your local project you
can add a respective -I entry in your Makefile (not recommended though).

All .ld files and .a libs are installed in $(TOOLCHAIN_DIR)/lib
directly (as before), but are now renamed to avoid potential
conflicts now or in the future. Examples:

  libopencm3_lpc13xx.a
  libopencm3_lpc13xx.ld
  libopencm3_stm32.a
  libopencm3_stm32.ld

2010-12-31 18:18:39 +01:00

i2c_stts75_sensor.c

Some more file/path restructuring.

2010-12-31 18:18:39 +01:00

i2c_stts75_sensor.ld

Some more file/path restructuring.

2010-12-31 18:18:39 +01:00

Makefile

s/libopenstm32/libopencm3/ is some Makefiles.

2010-12-30 03:45:00 +01:00

README

Move STM32 examples to examples/stm32 subdir.

2010-12-30 01:52:44 +01:00

stts75.c

Some more file/path restructuring.

2010-12-31 18:18:39 +01:00

stts75.h

More renames for libopenstm32 -> libopencm3.

2010-12-30 13:19:25 +01:00

README

------------------------------------------------------------------------------
README
------------------------------------------------------------------------------

This example program sends some characters on USART1.
Afterwards it connects to an STTS75 sensor (ST LM75 compatible)
at adress A0/1/2=0 and sets reverse polarity, 26 degree Tos and Thyst.

It reads out the temperature and submits the temperature over USART1 in
binary format (ASCII 0/1).

The terminal settings for the receiving device/PC are 115200 8n1.