Started a pwm 6step output example. Enabled timer convenience functions and some minor fixes that showed themselves while writing the bare bone example.
This commit is contained in:
Piotr Esden-Tempski
23
examples/stm32/stm32-h103/pwm_6step/Makefile
Normal file
23
examples/stm32/stm32-h103/pwm_6step/Makefile
Normal file
@@ -0,0 +1,23 @@
|
||||
##
|
||||
## This file is part of the libopencm3 project.
|
||||
##
|
||||
## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
|
||||
##
|
||||
## This program is free software: you can redistribute it and/or modify
|
||||
## it under the terms of the GNU General Public License as published by
|
||||
## the Free Software Foundation, either version 3 of the License, or
|
||||
## (at your option) any later version.
|
||||
##
|
||||
## This program is distributed in the hope that it will be useful,
|
||||
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
## GNU General Public License for more details.
|
||||
##
|
||||
## You should have received a copy of the GNU General Public License
|
||||
## along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
##
|
||||
|
||||
BINARY = pwm_6step
|
||||
|
||||
include ../../Makefile.include
|
||||
|
||||
319
examples/stm32/stm32-h103/pwm_6step/pwm_6step.c
Normal file
319
examples/stm32/stm32-h103/pwm_6step/pwm_6step.c
Normal file
@@ -0,0 +1,319 @@
|
||||
/*
|
||||
* This file is part of the libopencm3 project.
|
||||
*
|
||||
* Copyright (C) 2011 Piotr Esden-Tempski <piotr@esden.net>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include <libopencm3/stm32/rcc.h>
|
||||
#include <libopencm3/stm32/nvic.h>
|
||||
#include <libopencm3/stm32/gpio.h>
|
||||
#include <libopencm3/stm32/timer.h>
|
||||
|
||||
void clock_setup(void)
|
||||
{
|
||||
rcc_clock_setup_in_hse_8mhz_out_72mhz();
|
||||
|
||||
/* Enable TIM1 clock. */
|
||||
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_TIM1EN);
|
||||
|
||||
/* Enable GPIOA, GPIOB and Alternate Function clocks. */
|
||||
rcc_peripheral_enable_clock(&RCC_APB2ENR,
|
||||
RCC_APB2ENR_IOPAEN |
|
||||
RCC_APB2ENR_IOPBEN |
|
||||
RCC_APB2ENR_AFIOEN);
|
||||
}
|
||||
|
||||
void gpio_setup(void)
|
||||
{
|
||||
/*
|
||||
* Set GPIO12 (PORTC) (led) to
|
||||
* 'output alternate function push-pull'.
|
||||
*/
|
||||
gpio_set_mode(GPIOC, GPIO_MODE_OUTPUT_50_MHZ,
|
||||
GPIO_CNF_OUTPUT_PUSHPULL, GPIO12);
|
||||
|
||||
/*
|
||||
* Set TIM1 chanel output pins to
|
||||
* 'output alternate function push-pull'.
|
||||
*/
|
||||
gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ,
|
||||
GPIO_CNF_OUTPUT_ALTFN_PUSHPULL,
|
||||
GPIO_TIM1_CH1 |
|
||||
GPIO_TIM1_CH2 |
|
||||
GPIO_TIM1_CH3);
|
||||
|
||||
/*
|
||||
* Set TIM1 complementary chanel output pins to
|
||||
* 'output alternate function push-pull'.
|
||||
*/
|
||||
gpio_set_mode(GPIOB, GPIO_MODE_OUTPUT_50_MHZ,
|
||||
GPIO_CNF_OUTPUT_ALTFN_PUSHPULL,
|
||||
GPIO_TIM1_CH1N |
|
||||
GPIO_TIM1_CH2N |
|
||||
GPIO_TIM1_CH3N);
|
||||
|
||||
}
|
||||
|
||||
void tim_setup(void)
|
||||
{
|
||||
|
||||
/* Enable TIM1 commutation interrupt. */
|
||||
nvic_enable_irq(NVIC_TIM1_TRG_COM_IRQ);
|
||||
|
||||
/* Clock division. */
|
||||
timer_set_clock_division(TIM1, TIM_CR1_CKD_CK_INT);
|
||||
|
||||
/* Timer global mode:
|
||||
* - No divider
|
||||
* - alignment edge
|
||||
* - direction up
|
||||
*/
|
||||
timer_set_mode(TIM1, TIM_CR1_CKD_CK_INT,
|
||||
TIM_CR1_CMS_EDGE,
|
||||
TIM_CR1_DIR_UP);
|
||||
|
||||
/* Enable preload. */
|
||||
timer_enable_preload(TIM1);
|
||||
//timer_disable_preload(TIM1);
|
||||
|
||||
/* Continous mode. */
|
||||
timer_continuous_mode(TIM1);
|
||||
|
||||
/* Period (32kHz) */
|
||||
TIM1_ARR = 72000000 / 32000;
|
||||
|
||||
/* -- OC1 and OC1N configuration -- */
|
||||
{
|
||||
u16 tmp_ccmr1 = 0, tmp_ccer = 0, tmp_cr2 = 0;
|
||||
|
||||
/** Disable OC1. **/
|
||||
TIM1_CCER &= ~TIM_CCER_CC1E;
|
||||
|
||||
/** Disable OC1N. **/
|
||||
TIM1_CCER &= ~TIM_CCER_CC1NE;
|
||||
|
||||
/** Get registers. **/
|
||||
tmp_ccmr1 = TIM1_CCMR1;
|
||||
tmp_ccer = TIM1_CCER;
|
||||
tmp_cr2 = TIM1_CR2;
|
||||
|
||||
/** Configure global mode of line 1 **/
|
||||
|
||||
/* Disable OC1 clear. (esden: What is that?) */
|
||||
tmp_ccmr1 &= ~TIM_CCMR1_OC1CE;
|
||||
|
||||
/* Set CC1 to output mode. */
|
||||
tmp_ccmr1 &= ~TIM_CCMR1_CC1S_MASK;
|
||||
tmp_ccmr1 |= TIM_CCMR1_CC1S_OUT;
|
||||
|
||||
/* Enable OC1 preload enable. */
|
||||
//tmp_ccmr1 |= TIM_CCMR1_OC1PE;
|
||||
tmp_ccmr1 &= ~TIM_CCMR1_OC1PE;
|
||||
|
||||
/* Disable OC1 fast mode. */
|
||||
tmp_ccmr1 &= ~TIM_CCMR1_OC1FE;
|
||||
|
||||
/* Set OC1 mode to PWM1. */
|
||||
tmp_ccmr1 &= ~TIM_CCMR1_OC1M_MASK;
|
||||
tmp_ccmr1 |= TIM_CCMR1_OC1M_PWM1;
|
||||
|
||||
/** Configure OC1. **/
|
||||
|
||||
/* Set output polarity level, high. */
|
||||
tmp_ccer &= ~TIM_CCER_CC1P;
|
||||
|
||||
/* Enable OC1 output */
|
||||
tmp_ccer |= TIM_CCER_CC1E;
|
||||
|
||||
/* Set OC1 idle state to "set". (TIM1 and TIM8 only) */
|
||||
tmp_cr2 |= TIM_CR2_OIS1;
|
||||
|
||||
/** Configure OC1N. **/
|
||||
|
||||
/* Set output polarity level, high. (TIM1 and TIM8 only) */
|
||||
tmp_ccer &= ~TIM_CCER_CC1NP;
|
||||
|
||||
/* Enable OC1N output. (TIM1 and TIM8 only) */
|
||||
tmp_ccer |= TIM_CCER_CC1NE;
|
||||
|
||||
/* Set OC1N idle state to "set". (TIM1 and TIM8 only) */
|
||||
tmp_cr2 |= TIM_CR2_OIS1N;
|
||||
|
||||
/** Set the capture compare value for OC1 **/
|
||||
TIM1_CCR1 = 100;
|
||||
|
||||
/** Write register values **/
|
||||
TIM1_CR2 = tmp_cr2;
|
||||
TIM1_CCMR1 = tmp_ccmr1;
|
||||
TIM1_CCER = tmp_ccer;
|
||||
|
||||
}
|
||||
|
||||
/* -- OC2 and OC2N configuration -- */
|
||||
{
|
||||
u16 tmp_ccmr1 = 0, tmp_ccer = 0, tmp_cr2 = 0;
|
||||
|
||||
/** Disable OC2. **/
|
||||
TIM1_CCER &= ~TIM_CCER_CC2E;
|
||||
|
||||
/** Disable OC2N. **/
|
||||
TIM1_CCER &= ~TIM_CCER_CC2NE;
|
||||
|
||||
/** Get registers. **/
|
||||
tmp_ccmr1 = TIM1_CCMR1;
|
||||
tmp_ccer = TIM1_CCER;
|
||||
tmp_cr2 = TIM1_CR2;
|
||||
|
||||
/** Configure global mode of line 1 **/
|
||||
|
||||
/* Disable OC2 clear. (esden: What is that?) */
|
||||
tmp_ccmr1 &= ~TIM_CCMR1_OC2CE;
|
||||
|
||||
/* Set CC2 to output mode. */
|
||||
tmp_ccmr1 &= ~TIM_CCMR1_CC2S_MASK;
|
||||
tmp_ccmr1 |= TIM_CCMR1_CC2S_OUT;
|
||||
|
||||
/* Enable OC2 preload enable. */
|
||||
tmp_ccmr1 |= TIM_CCMR1_OC2PE;
|
||||
|
||||
/* Disable OC2 fast mode. */
|
||||
tmp_ccmr1 &= ~TIM_CCMR1_OC2FE;
|
||||
|
||||
/* Set OC2 mode to PWM1. */
|
||||
tmp_ccmr1 &= ~TIM_CCMR1_OC2M_MASK;
|
||||
tmp_ccmr1 |= TIM_CCMR1_OC2M_PWM1;
|
||||
|
||||
/** Configure OC2. **/
|
||||
|
||||
/* Set output polarity level, high. */
|
||||
tmp_ccer &= ~TIM_CCER_CC2P;
|
||||
|
||||
/* Enable OC2 output */
|
||||
tmp_ccer |= TIM_CCER_CC2E;
|
||||
|
||||
/* Set OC2 idle state to "set". (TIM1 and TIM8 only) */
|
||||
tmp_cr2 |= TIM_CR2_OIS2;
|
||||
|
||||
/** Configure OC2N. **/
|
||||
|
||||
/* Set output polarity level, high. (TIM1 and TIM8 only) */
|
||||
tmp_ccer &= ~TIM_CCER_CC2NP;
|
||||
|
||||
/* Enable OC2N output. (TIM1 and TIM8 only) */
|
||||
tmp_ccer |= TIM_CCER_CC2NE;
|
||||
|
||||
/* Set OC2N idle state to "set". (TIM1 and TIM8 only) */
|
||||
tmp_cr2 |= TIM_CR2_OIS2N;
|
||||
|
||||
/** Set the capture compare value for OC2 **/
|
||||
TIM1_CCR2 = 200;
|
||||
|
||||
/** Write register values **/
|
||||
TIM1_CR2 = tmp_cr2;
|
||||
TIM1_CCMR1 = tmp_ccmr1;
|
||||
TIM1_CCER = tmp_ccer;
|
||||
|
||||
}
|
||||
|
||||
/* -- OC3 and OC3N configuration -- */
|
||||
{
|
||||
u16 tmp_ccmr2 = 0, tmp_ccer = 0, tmp_cr2 = 0;
|
||||
|
||||
/** Disable OC3. **/
|
||||
TIM1_CCER &= ~TIM_CCER_CC3E;
|
||||
|
||||
/** Disable OC3N. **/
|
||||
TIM1_CCER &= ~TIM_CCER_CC3NE;
|
||||
|
||||
/** Get registers. **/
|
||||
tmp_ccmr2 = TIM1_CCMR2;
|
||||
tmp_ccer = TIM1_CCER;
|
||||
tmp_cr2 = TIM1_CR2;
|
||||
|
||||
/** Configure global mode of line 1 **/
|
||||
|
||||
/* Disable OC3 clear. (esden: What is that?) */
|
||||
tmp_ccmr2 &= ~TIM_CCMR2_OC3CE;
|
||||
|
||||
/* Set CC3 to output mode. */
|
||||
tmp_ccmr2 &= ~TIM_CCMR2_CC3S_MASK;
|
||||
tmp_ccmr2 |= TIM_CCMR2_CC3S_OUT;
|
||||
|
||||
/* Enable OC3 preload enable. */
|
||||
tmp_ccmr2 |= TIM_CCMR2_OC3PE;
|
||||
|
||||
/* Disable OC3 fast mode. */
|
||||
tmp_ccmr2 &= ~TIM_CCMR2_OC3FE;
|
||||
|
||||
/* Set OC3 mode to PWM1. */
|
||||
tmp_ccmr2 &= ~TIM_CCMR2_OC3M_MASK;
|
||||
tmp_ccmr2 |= TIM_CCMR2_OC3M_PWM1;
|
||||
|
||||
/** Configure OC3. **/
|
||||
|
||||
/* Set output polarity level, high. */
|
||||
tmp_ccer &= ~TIM_CCER_CC3P;
|
||||
|
||||
/* Enable OC3 output */
|
||||
tmp_ccer |= TIM_CCER_CC3E;
|
||||
|
||||
/* Set OC3 idle state to "set". (TIM1 and TIM8 only) */
|
||||
tmp_cr2 |= TIM_CR2_OIS3;
|
||||
|
||||
/** Configure OC3N. **/
|
||||
|
||||
/* Set output polarity level, high. (TIM1 and TIM8 only) */
|
||||
tmp_ccer &= ~TIM_CCER_CC3NP;
|
||||
|
||||
/* Enable OC3N output. (TIM1 and TIM8 only) */
|
||||
tmp_ccer |= TIM_CCER_CC3NE;
|
||||
|
||||
/* Set OC3N idle state to "set". (TIM1 and TIM8 only) */
|
||||
tmp_cr2 |= TIM_CR2_OIS3N;
|
||||
|
||||
/** Set the capture compare value for OC3 **/
|
||||
TIM1_CCR3 = 300;
|
||||
|
||||
/** Write register values **/
|
||||
TIM1_CR2 = tmp_cr2;
|
||||
TIM1_CCMR2 = tmp_ccmr2;
|
||||
TIM1_CCER = tmp_ccer;
|
||||
|
||||
}
|
||||
|
||||
/* ---- */
|
||||
/* ARR reload enable */
|
||||
TIM1_CR1 |= TIM_CR1_ARPE;
|
||||
|
||||
/* Enable outputs in the break subsystem */
|
||||
TIM1_BDTR |= TIM_BDTR_MOE;
|
||||
|
||||
/* Counter enable */
|
||||
TIM1_CR1 |= TIM_CR1_CEN;
|
||||
}
|
||||
|
||||
int main(void)
|
||||
{
|
||||
clock_setup();
|
||||
gpio_setup();
|
||||
tim_setup();
|
||||
|
||||
while (1) {
|
||||
__asm("nop");
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
31
examples/stm32/stm32-h103/pwm_6step/pwm_6step.ld
Normal file
31
examples/stm32/stm32-h103/pwm_6step/pwm_6step.ld
Normal file
@@ -0,0 +1,31 @@
|
||||
/*
|
||||
* This file is part of the libopencm3 project.
|
||||
*
|
||||
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
/* Linker script for Olimex STM32-H103 (STM32F103RBT6, 128K flash, 20K RAM). */
|
||||
|
||||
/* Define memory regions. */
|
||||
MEMORY
|
||||
{
|
||||
rom (rx) : ORIGIN = 0x08000000, LENGTH = 128K
|
||||
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 20K
|
||||
}
|
||||
|
||||
/* Include the common ld script. */
|
||||
INCLUDE libopencm3_stm32.ld
|
||||
|
||||
Reference in New Issue
Block a user