Rename F1 examples folder.

examples/stm32f1/lisa-m/fancyblink/fancyblink.c

@@ -0,0 +1,67 @@
+/*
+ * This file is part of the libopencm3 project.
+ *
+ * Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
+ * Copyright (C) 2011 Piotr Esden-Tempski <piotr@esden.net>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <libopencm3/stm32/rcc.h>
+#include <libopencm3/stm32/gpio.h>
+
+/* Set STM32 to 72 MHz. */
+void clock_setup(void)
+{
+	rcc_clock_setup_in_hse_12mhz_out_72mhz();
+
+	/* Enable GPIOC clock. */
+	rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPBEN);
+	rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPCEN);
+	rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_AFIOEN);
+
+}
+
+void gpio_setup(void)
+{
+	/* Set GPIO12 (in GPIO port C) to 'output push-pull'. */
+	gpio_set_mode(GPIOC, GPIO_MODE_OUTPUT_50_MHZ,
+		      GPIO_CNF_OUTPUT_PUSHPULL, GPIO13);
+	gpio_set_mode(GPIOB, GPIO_MODE_OUTPUT_50_MHZ,
+		      GPIO_CNF_OUTPUT_PUSHPULL, GPIO4);
+
+	AFIO_MAPR |= AFIO_MAPR_SWJ_CFG_FULL_SWJ_NO_JNTRST;
+
+	/* preconfigure the led's */
+	gpio_set(GPIOB, GPIO4); /* switch off led */
+	gpio_clear(GPIOC, GPIO13); /* switch on led */
+}
+
+int main(void)
+{
+	int i;
+
+	clock_setup();
+	gpio_setup();
+
+	/* Blink the LED (PC12) on the board. */
+	while (1) {
+		gpio_toggle(GPIOC, GPIO13);	/* LED on/off */
+		gpio_toggle(GPIOB, GPIO4);	/* LED on/off */
+		for (i = 0; i < 800000; i++)	/* Wait a bit. */
+			__asm__("nop");
+	}
+
+	return 0;
+}