stm32f7: flash: added proper support
This commit is contained in:
Matthew Lai
committed by
Karl Palsson
Karl Palsson
parent
ab9e425272
commit
ba0e0424b5
@@ -42,9 +42,10 @@ TGT_CFLAGS += $(STANDARD_FLAGS)
|
||||
|
||||
ARFLAGS = rcs
|
||||
|
||||
OBJS = pwr.o rcc.o gpio.o gpio_common_all.o gpio_common_f0234.o
|
||||
OBJS = flash.o pwr.o rcc.o
|
||||
OBJS += gpio.o gpio_common_all.o gpio_common_f0234.o
|
||||
|
||||
OBJS += rcc_common_all.o flash_common_f234.o flash_common_f24.o
|
||||
OBJS += rcc_common_all.o
|
||||
|
||||
OBJS += rng_common_v1.o
|
||||
|
||||
|
||||
479
lib/stm32/f7/flash.c
Normal file
479
lib/stm32/f7/flash.c
Normal file
@@ -0,0 +1,479 @@
|
||||
/** @addtogroup flash_file
|
||||
*
|
||||
*/
|
||||
|
||||
/*
|
||||
* This file is part of the libopencm3 project.
|
||||
*
|
||||
* Copyright (C) 2017 Matthew Lai @m@matthewlai.ca>
|
||||
* Copyright (C) 2010 Thomas Otto <tommi@viadmin.org>
|
||||
* Copyright (C) 2010 Mark Butler <mbutler@physics.otago.ac.nz>
|
||||
*
|
||||
* This library is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU Lesser General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This library is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU Lesser General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU Lesser General Public License
|
||||
* along with this library. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
/**@{*/
|
||||
|
||||
#include <libopencm3/stm32/flash.h>
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief Set the Program Parallelism Size
|
||||
|
||||
Set the programming word width. Note carefully the power supply voltage
|
||||
restrictions under which the different word sizes may be used. See the
|
||||
programming manual for more information.
|
||||
@param[in] psize The programming word width one of: @ref flash_cr_program_width
|
||||
*/
|
||||
|
||||
static inline void flash_set_program_size(uint32_t psize)
|
||||
{
|
||||
FLASH_CR &= ~(FLASH_CR_PROGRAM_MASK << FLASH_CR_PROGRAM_SHIFT);
|
||||
FLASH_CR |= psize << FLASH_CR_PROGRAM_SHIFT;
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief Issue Pipeline Stall
|
||||
|
||||
Issue a pipeline stall to make sure all write operations completed.
|
||||
|
||||
RM0385: After performing a data write operation and before polling the BSY bit
|
||||
to be cleared, the software can issue a DSB instruction to guarantee the
|
||||
completion of a previous data write operation.
|
||||
|
||||
*/
|
||||
|
||||
static inline void flash_pipeline_stall(void)
|
||||
{
|
||||
__asm__ volatile("dsb":::"memory");
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief Set the Number of Wait States
|
||||
|
||||
Used to match the system clock to the FLASH memory access time. See the
|
||||
programming manual for more information on clock speed ranges. The latency must
|
||||
be changed to the appropriate value <b>before</b> any increase in clock
|
||||
speed, or <b>after</b> any decrease in clock speed.
|
||||
|
||||
@param[in] ws values from @ref flash_latency.
|
||||
*/
|
||||
void flash_set_ws(uint32_t ws)
|
||||
{
|
||||
uint32_t reg32;
|
||||
|
||||
reg32 = FLASH_ACR;
|
||||
reg32 &= ~(FLASH_ACR_LATENCY_MASK);
|
||||
reg32 |= ws;
|
||||
FLASH_ACR = reg32;
|
||||
|
||||
/* Wait until the new wait states take effect.
|
||||
* RM0385: Check that the new number of wait states is taken into
|
||||
* account to access the Flash memory by reading the FLASH_ACR register.
|
||||
*/
|
||||
while ((FLASH_ACR & FLASH_ACR_LATENCY_MASK) != ws);
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief Unlock the Flash Program and Erase Controller
|
||||
|
||||
This enables write access to the Flash memory. It is locked by default on
|
||||
reset.
|
||||
*/
|
||||
|
||||
void flash_unlock(void)
|
||||
{
|
||||
/* Clear the unlock sequence state. */
|
||||
FLASH_CR |= FLASH_CR_LOCK;
|
||||
|
||||
/* Authorize the FPEC access. */
|
||||
FLASH_KEYR = FLASH_KEYR_KEY1;
|
||||
FLASH_KEYR = FLASH_KEYR_KEY2;
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief Lock the Flash Program and Erase Controller
|
||||
|
||||
Used to prevent spurious writes to FLASH.
|
||||
*/
|
||||
|
||||
void flash_lock(void)
|
||||
{
|
||||
FLASH_CR |= FLASH_CR_LOCK;
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief Clear the Programming Error Status Flag
|
||||
|
||||
*/
|
||||
|
||||
void flash_clear_pgperr_flag(void)
|
||||
{
|
||||
FLASH_SR |= FLASH_SR_PGPERR;
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief Clear the End of Operation Status Flag
|
||||
|
||||
*/
|
||||
|
||||
void flash_clear_eop_flag(void)
|
||||
{
|
||||
FLASH_SR |= FLASH_SR_EOP;
|
||||
}
|
||||
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief Wait until Last Operation has Ended
|
||||
|
||||
This loops indefinitely until an operation (write or erase) has completed by
|
||||
testing the busy flag.
|
||||
*/
|
||||
|
||||
void flash_wait_for_last_operation(void)
|
||||
{
|
||||
flash_pipeline_stall();
|
||||
while ((FLASH_SR & FLASH_SR_BSY) == FLASH_SR_BSY);
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief Unlock the Option Byte Access
|
||||
|
||||
This enables write access to the option bytes. It is locked by default on
|
||||
reset.
|
||||
*/
|
||||
|
||||
void flash_unlock_option_bytes(void)
|
||||
{
|
||||
/* Clear the unlock state. */
|
||||
FLASH_OPTCR |= FLASH_OPTCR_OPTLOCK;
|
||||
|
||||
/* Unlock option bytes. */
|
||||
FLASH_OPTKEYR = FLASH_OPTKEYR_KEY1;
|
||||
FLASH_OPTKEYR = FLASH_OPTKEYR_KEY2;
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief Lock the Option Byte Access
|
||||
|
||||
This disables write access to the option bytes. It is locked by default on
|
||||
reset.
|
||||
*/
|
||||
|
||||
void flash_lock_option_bytes(void)
|
||||
{
|
||||
FLASH_OPTCR |= FLASH_OPTCR_OPTLOCK;
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief Clear the Erase Sequence Error Flag
|
||||
|
||||
This flag is set when an erase operation is performed with control register has
|
||||
not been correctly set.
|
||||
*/
|
||||
|
||||
void flash_clear_erserr_flag(void)
|
||||
{
|
||||
FLASH_SR |= FLASH_SR_ERSERR;
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief Clear the Programming Alignment Error Flag
|
||||
|
||||
*/
|
||||
|
||||
void flash_clear_pgaerr_flag(void)
|
||||
{
|
||||
FLASH_SR |= FLASH_SR_PGAERR;
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief Clear the Write Protect Error Flag
|
||||
|
||||
*/
|
||||
|
||||
void flash_clear_wrperr_flag(void)
|
||||
{
|
||||
FLASH_SR |= FLASH_SR_WRPERR;
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief Enable the ART Cache
|
||||
|
||||
*/
|
||||
|
||||
void flash_art_enable(void)
|
||||
{
|
||||
FLASH_ACR |= FLASH_ACR_ARTEN;
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief Enable the FLASH Prefetch Buffer
|
||||
|
||||
This buffer is used for instruction fetches and is enabled by default after
|
||||
reset.
|
||||
|
||||
Note carefully the clock restrictions under which the prefetch buffer may be
|
||||
enabled or disabled. Changes are normally made while the clock is running in
|
||||
the power-on low frequency mode before being set to a higher speed mode.
|
||||
See the reference manual for details.
|
||||
*/
|
||||
|
||||
void flash_prefetch_enable(void)
|
||||
{
|
||||
FLASH_ACR |= FLASH_ACR_PRFTEN;
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief Disable the FLASH Prefetch Buffer
|
||||
|
||||
Note carefully the clock restrictions under which the prefetch buffer may be
|
||||
set to disabled. See the reference manual for details.
|
||||
*/
|
||||
|
||||
void flash_prefetch_disable(void)
|
||||
{
|
||||
FLASH_ACR &= ~FLASH_ACR_PRFTEN;
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief Reset the ART Cache
|
||||
|
||||
The ART cache must be disabled for this to have effect.
|
||||
*/
|
||||
|
||||
void flash_art_reset(void)
|
||||
{
|
||||
FLASH_ACR |= FLASH_ACR_ARTRST;
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief Clear All Status Flags
|
||||
|
||||
Program error, end of operation, write protect error.
|
||||
*/
|
||||
|
||||
void flash_clear_status_flags(void)
|
||||
{
|
||||
flash_clear_erserr_flag();
|
||||
flash_clear_pgaerr_flag();
|
||||
flash_clear_wrperr_flag();
|
||||
flash_clear_pgperr_flag();
|
||||
flash_clear_eop_flag();
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief Erase All FLASH
|
||||
|
||||
This performs all operations necessary to erase all sectors in the FLASH
|
||||
memory.
|
||||
|
||||
@param program_size: 0 (8-bit), 1 (16-bit), 2 (32-bit), 3 (64-bit)
|
||||
*/
|
||||
|
||||
void flash_erase_all_sectors(uint32_t program_size)
|
||||
{
|
||||
flash_wait_for_last_operation();
|
||||
flash_set_program_size(program_size);
|
||||
|
||||
FLASH_CR |= FLASH_CR_MER; /* Enable mass erase. */
|
||||
FLASH_CR |= FLASH_CR_STRT; /* Trigger the erase. */
|
||||
|
||||
flash_wait_for_last_operation();
|
||||
FLASH_CR &= ~FLASH_CR_MER; /* Disable mass erase. */
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief Erase a Sector of FLASH
|
||||
|
||||
This performs all operations necessary to erase a sector in FLASH memory.
|
||||
The page should be checked to ensure that it was properly erased. A sector must
|
||||
first be fully erased before attempting to program it.
|
||||
|
||||
See the reference manual or the FLASH programming manual for details.
|
||||
|
||||
@param[in] sector (0 - 11 for some parts, 0-23 on others)
|
||||
@param program_size: 0 (8-bit), 1 (16-bit), 2 (32-bit), 3 (64-bit)
|
||||
*/
|
||||
|
||||
void flash_erase_sector(uint8_t sector, uint32_t program_size)
|
||||
{
|
||||
flash_wait_for_last_operation();
|
||||
flash_set_program_size(program_size);
|
||||
|
||||
FLASH_CR &= ~(FLASH_CR_SNB_MASK << FLASH_CR_SNB_SHIFT);
|
||||
FLASH_CR |= (sector & FLASH_CR_SNB_MASK) << FLASH_CR_SNB_SHIFT;
|
||||
FLASH_CR |= FLASH_CR_SER;
|
||||
FLASH_CR |= FLASH_CR_STRT;
|
||||
|
||||
flash_wait_for_last_operation();
|
||||
FLASH_CR &= ~FLASH_CR_SER;
|
||||
FLASH_CR &= ~(FLASH_CR_SNB_MASK << FLASH_CR_SNB_SHIFT);
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief Program a 64 bit Word to FLASH
|
||||
|
||||
This performs all operations necessary to program a 64 bit word to FLASH memory.
|
||||
The program error flag should be checked separately for the event that memory
|
||||
was not properly erased.
|
||||
|
||||
@param[in] address Starting address in Flash.
|
||||
@param[in] data Double word to write
|
||||
*/
|
||||
|
||||
void flash_program_double_word(uint32_t address, uint64_t data)
|
||||
{
|
||||
/* Ensure that all flash operations are complete. */
|
||||
flash_wait_for_last_operation();
|
||||
flash_set_program_size(FLASH_CR_PROGRAM_X64);
|
||||
|
||||
/* Enable writes to flash. */
|
||||
FLASH_CR |= FLASH_CR_PG;
|
||||
|
||||
/* Program the double_word. */
|
||||
MMIO64(address) = data;
|
||||
|
||||
/* Wait for the write to complete. */
|
||||
flash_wait_for_last_operation();
|
||||
|
||||
/* Disable writes to flash. */
|
||||
FLASH_CR &= ~FLASH_CR_PG;
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief Program a 32 bit Word to FLASH
|
||||
|
||||
This performs all operations necessary to program a 32 bit word to FLASH memory.
|
||||
The program error flag should be checked separately for the event that memory
|
||||
was not properly erased.
|
||||
|
||||
@param[in] address Starting address in Flash.
|
||||
@param[in] data word to write
|
||||
*/
|
||||
|
||||
void flash_program_word(uint32_t address, uint32_t data)
|
||||
{
|
||||
/* Ensure that all flash operations are complete. */
|
||||
flash_wait_for_last_operation();
|
||||
flash_set_program_size(FLASH_CR_PROGRAM_X32);
|
||||
|
||||
/* Enable writes to flash. */
|
||||
FLASH_CR |= FLASH_CR_PG;
|
||||
|
||||
/* Program the word. */
|
||||
MMIO32(address) = data;
|
||||
|
||||
/* Wait for the write to complete. */
|
||||
flash_wait_for_last_operation();
|
||||
|
||||
/* Disable writes to flash. */
|
||||
FLASH_CR &= ~FLASH_CR_PG;
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief Program a Half Word to FLASH
|
||||
|
||||
This performs all operations necessary to program a 16 bit word to FLASH memory.
|
||||
The program error flag should be checked separately for the event that memory
|
||||
was not properly erased.
|
||||
|
||||
@param[in] address Starting address in Flash.
|
||||
@param[in] data half word to write
|
||||
*/
|
||||
|
||||
void flash_program_half_word(uint32_t address, uint16_t data)
|
||||
{
|
||||
flash_wait_for_last_operation();
|
||||
flash_set_program_size(FLASH_CR_PROGRAM_X16);
|
||||
|
||||
FLASH_CR |= FLASH_CR_PG;
|
||||
|
||||
MMIO16(address) = data;
|
||||
|
||||
flash_wait_for_last_operation();
|
||||
|
||||
FLASH_CR &= ~FLASH_CR_PG; /* Disable the PG bit. */
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief Program an 8 bit Byte to FLASH
|
||||
|
||||
This performs all operations necessary to program an 8 bit byte to FLASH memory.
|
||||
The program error flag should be checked separately for the event that memory
|
||||
was not properly erased.
|
||||
|
||||
@param[in] address Starting address in Flash.
|
||||
@param[in] data byte to write
|
||||
*/
|
||||
|
||||
void flash_program_byte(uint32_t address, uint8_t data)
|
||||
{
|
||||
flash_wait_for_last_operation();
|
||||
flash_set_program_size(FLASH_CR_PROGRAM_X8);
|
||||
|
||||
FLASH_CR |= FLASH_CR_PG;
|
||||
|
||||
MMIO8(address) = data;
|
||||
|
||||
flash_wait_for_last_operation();
|
||||
|
||||
FLASH_CR &= ~FLASH_CR_PG; /* Disable the PG bit. */
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief Program a Data Block to FLASH
|
||||
|
||||
This programs an arbitrary length data block to FLASH memory. All the addresses
|
||||
written to must have been erased (by calling flash_erase_sector).
|
||||
The program error flag should be checked separately for the event that memory
|
||||
was not properly erased.
|
||||
|
||||
@param[in] address Starting address in Flash.
|
||||
@param[in] data Pointer to start of data block.
|
||||
@param[in] len Length of data block.
|
||||
*/
|
||||
|
||||
void flash_program(uint32_t address, uint8_t *data, uint32_t len)
|
||||
{
|
||||
/* TODO: Use dword and word size program operations where possible for
|
||||
* turbo speed.
|
||||
*/
|
||||
uint32_t i;
|
||||
for (i = 0; i < len; i++) {
|
||||
flash_program_byte(address+i, data[i]);
|
||||
}
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief Program the Option Bytes
|
||||
|
||||
This performs all operations necessary to program the option bytes.
|
||||
The option bytes do not need to be erased first.
|
||||
|
||||
@param[in] data value to be programmed.
|
||||
*/
|
||||
|
||||
void flash_program_option_bytes(uint32_t data)
|
||||
{
|
||||
flash_wait_for_last_operation();
|
||||
|
||||
if (FLASH_OPTCR & FLASH_OPTCR_OPTLOCK) {
|
||||
flash_unlock_option_bytes();
|
||||
}
|
||||
|
||||
FLASH_OPTCR = data & ~0x3;
|
||||
FLASH_OPTCR |= FLASH_OPTCR_OPTSTRT; /* Enable option byte prog. */
|
||||
flash_wait_for_last_operation();
|
||||
}
|
||||
/**@}*/
|
||||
@@ -13,13 +13,12 @@ const struct rcc_clock_scale rcc_hse_25mhz_3v3[RCC_CLOCK_3V3_END] = {
|
||||
.plln = 432,
|
||||
.pllp = 2,
|
||||
.pllq = 9,
|
||||
.flash_config = FLASH_ACR_ICEN | FLASH_ACR_DCEN |
|
||||
FLASH_ACR_LATENCY_7WS,
|
||||
.hpre = RCC_CFGR_HPRE_DIV_NONE,
|
||||
.ppre1 = RCC_CFGR_PPRE_DIV_4,
|
||||
.ppre2 = RCC_CFGR_PPRE_DIV_2,
|
||||
.vos_scale = PWR_SCALE1,
|
||||
.overdrive = 1,
|
||||
.flash_waitstates = 7,
|
||||
.apb1_frequency = 108000000,
|
||||
.apb2_frequency = 216000000,
|
||||
},
|
||||
@@ -328,7 +327,9 @@ void rcc_clock_setup_hse_3v3(const struct rcc_clock_scale *clock)
|
||||
rcc_wait_for_osc_ready(RCC_PLL);
|
||||
|
||||
/* Configure flash settings. */
|
||||
flash_set_ws(clock->flash_config);
|
||||
flash_set_ws(clock->flash_waitstates);
|
||||
flash_art_enable();
|
||||
flash_prefetch_enable();
|
||||
|
||||
/* Select PLL as SYSCLK source. */
|
||||
rcc_set_sysclk_source(RCC_CFGR_SW_PLL);
|
||||
|
||||
Reference in New Issue
Block a user