EMTime/libopencm3
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Add a few example programs for the Leaf Maple / IteadMaple boards.

Browse Source
This commit is contained in:
Weston Schmidt
2013-02-26 02:41:25 -08:00
committed by Piotr Esden-Tempski
parent b3d895bc64
commit 6ce2c6e13d
12 changed files with 700 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

25
examples/stm32/f1/stm32-maple/usart/Makefile Normal file
View File

@@ -0,0 +1,25 @@
##
## This file is part of the libopencm3 project.
##
## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
##
## This library is free software: you can redistribute it and/or modify
## it under the terms of the GNU Lesser General Public License as published by
## the Free Software Foundation, either version 3 of the License, or
## (at your option) any later version.
##
## This library is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU Lesser General Public License for more details.
##
## You should have received a copy of the GNU Lesser General Public License
## along with this library. If not, see <http://www.gnu.org/licenses/>.
##
BINARY = usart
LDSCRIPT = ../stm32-maple.ld
include ../../Makefile.include

13
examples/stm32/f1/stm32-maple/usart/README Normal file
View File

@@ -0,0 +1,13 @@
------------------------------------------------------------------------------
README
------------------------------------------------------------------------------
This example program sends some characters on USART3 on the ST STM32-based
Olimex STM32-H103 eval board (see http://olimex.com/dev/stm32-h103.html
for details).
The terminal settings for the receiving device/PC are 38400 8n1.
The sending is done in a blocking way in the code, see the usart_irq example
for a more elaborate USART example.

82
examples/stm32/f1/stm32-maple/usart/usart.c Normal file
View File

@@ -0,0 +1,82 @@
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
#include <libopencm3/stm32/f1/rcc.h>
#include <libopencm3/stm32/f1/gpio.h>
#include <libopencm3/stm32/usart.h>
void clock_setup(void)
{
rcc_clock_setup_in_hse_8mhz_out_72mhz();
/* Enable GPIOA clock. */
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN);
/* Enable clocks for GPIO port A (for GPIO_USART2_TX) and USART2. */
rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_USART2EN);
}
void usart_setup(void)
{
/* Setup GPIO pin GPIO_USART2_TX. */
gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ,
GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO_USART2_TX);
/* Setup UART parameters. */
usart_set_baudrate(USART2, 38400);
usart_set_databits(USART2, 8);
usart_set_stopbits(USART2, USART_STOPBITS_1);
usart_set_mode(USART2, USART_MODE_TX);
usart_set_parity(USART2, USART_PARITY_NONE);
usart_set_flow_control(USART2, USART_FLOWCONTROL_NONE);
/* Finally enable the USART. */
usart_enable(USART2);
}
void gpio_setup(void)
{
/* Set GPIO (in GPIO port A) to 'output push-pull'. */
gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_2_MHZ,
GPIO_CNF_OUTPUT_PUSHPULL, GPIO5);
}
int main(void)
{
int i, j = 0, c = 0;
clock_setup();
gpio_setup();
usart_setup();
/* Blink the LED (PA5) on the board with every transmitted byte. */
while (1) {
gpio_toggle(GPIOA, GPIO5); /* LED on/off */
usart_send_blocking(USART2, c + '0'); /* USART2: Send byte. */
c = (c == 9) ? 0 : c + 1; /* Increment c. */
if ((j++ % 80) == 0) { /* Newline after line full. */
usart_send_blocking(USART2, '\r');
usart_send_blocking(USART2, '\n');
}
for (i = 0; i < 8000000; i++) /* Wait a bit. */
__asm__("nop");
}
return 0;
}