EMTime/libopencm3
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Fixed all warnings for examples.

Browse Source
This commit is contained in:
Piotr Esden-Tempski
2013-02-26 19:33:42 -08:00
parent 9c552e7585
commit 3d3ddc7014
88 changed files with 365 additions and 306 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
examples/stm32/f1/obldc/can/can.c
View File

@@ -47,7 +47,7 @@ struct can_rx_msg {
struct can_tx_msg can_tx_msg;
struct can_rx_msg can_rx_msg;
void gpio_setup(void)
static void gpio_setup(void)
{
/* Enable GPIOA clock. */
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN);
@@ -73,7 +73,7 @@ void gpio_setup(void)
GPIO_CNF_OUTPUT_PUSHPULL, GPIO1);
}
void systick_setup(void)
static void systick_setup(void)
{
/* 72MHz / 8 => 9000000 counts per second */
systick_set_clocksource(STK_CTRL_CLKSOURCE_AHB_DIV8);
@@ -88,7 +88,7 @@ void systick_setup(void)
systick_counter_enable();
}
void can_setup(void)
static void can_setup(void)
{
/* Enable peripheral clocks. */
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_AFIOEN);

4
examples/stm32/f1/obldc/led/led.c
View File

@@ -21,7 +21,7 @@
#include <libopencm3/stm32/f1/rcc.h>
#include <libopencm3/stm32/f1/gpio.h>
void clock_setup(void)
static void clock_setup(void)
{
/* Set STM32 to 72 MHz. */
rcc_clock_setup_in_hse_8mhz_out_72mhz();
@@ -33,7 +33,7 @@ void clock_setup(void)
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPBEN);
}
void gpio_setup(void)
static void gpio_setup(void)
{
/* Set GPIO6 and 7 (in GPIO port A) to 'output push-pull'. */
gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ,

7
examples/stm32/f1/obldc/pwmleds/pwmleds.c
View File

@@ -236,7 +236,7 @@ static const u16 gamma_table_3_0[] = {
};
#endif
void clock_setup(void)
static void clock_setup(void)
{
rcc_clock_setup_in_hse_8mhz_out_72mhz();
@@ -250,7 +250,7 @@ void clock_setup(void)
RCC_APB2ENR_AFIOEN);
}
void gpio_setup(void)
static void gpio_setup(void)
{
/*
* Set GPIO6 and 7 (in GPIO port A) to
@@ -269,7 +269,8 @@ void gpio_setup(void)
GPIO_TIM3_CH3 | GPIO_TIM3_CH4);
}
void tim_setup(void)
static void tim_setup(void)
{
/* Clock division and mode */
TIM3_CR1 = TIM_CR1_CKD_CK_INT | TIM_CR1_CMS_EDGE;

2
examples/stm32/f1/obldc/systick/systick.c
View File

@@ -26,7 +26,7 @@
u32 temp32;
void gpio_setup(void)
static void gpio_setup(void)
{
/* Enable GPIOA clock. */
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN);

6
examples/stm32/f1/obldc/usart/usart.c
View File

@@ -21,7 +21,7 @@
#include <libopencm3/stm32/f1/gpio.h>
#include <libopencm3/stm32/usart.h>
void clock_setup(void)
static void clock_setup(void)
{
rcc_clock_setup_in_hse_8mhz_out_72mhz();
@@ -34,7 +34,7 @@ void clock_setup(void)
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_USART1EN);
}
void usart_setup(void)
static void usart_setup(void)
{
/* Setup GPIO6 (in GPIO port A) to 'output push-pull' for LED use. */
gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ,
@@ -58,7 +58,7 @@ void usart_setup(void)
usart_enable(USART1);
}
void gpio_setup(void)
static void gpio_setup(void)
{
/* Set GPIO6 (in GPIO port A) to 'output push-pull'. */
gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ,

6
examples/stm32/f1/obldc/usart_irq/usart_irq.c
View File

@@ -22,7 +22,7 @@
#include <libopencm3/stm32/usart.h>
#include <libopencm3/cm3/nvic.h>
void clock_setup(void)
static void clock_setup(void)
{
rcc_clock_setup_in_hse_8mhz_out_72mhz();
@@ -35,7 +35,7 @@ void clock_setup(void)
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_USART1EN);
}
void usart_setup(void)
static void usart_setup(void)
{
/* Enable the USART1 interrupt. */
nvic_enable_irq(NVIC_USART1_IRQ);
@@ -66,7 +66,7 @@ void usart_setup(void)
usart_enable(USART1);
}
void gpio_setup(void)
static void gpio_setup(void)
{
gpio_set(GPIOA, GPIO6 | GPIO7);