EMTime/libopencm3
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

lpc43: Use uint*_t instead of u*

Browse Source
This commit is contained in:
Ben Gamari
2013-06-30 17:59:22 -04:00
committed by Piotr Esden-Tempski
parent 26162762b7
commit 0d29b1d2d6
6 changed files with 165 additions and 165 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
lib/lpc43xx/ipc.c
View File

@@ -24,7 +24,7 @@
/* Set M0 in reset mode */
void ipc_halt_m0(void)
{
volatile u32 rst_active_status1;
volatile uint32_t rst_active_status1;
/* Check if M0 is reset by reading status */
rst_active_status1 = RESET_ACTIVE_STATUS1;
@@ -37,9 +37,9 @@ void ipc_halt_m0(void)
}
}
void ipc_start_m0(u32 cm0_baseaddr)
void ipc_start_m0(uint32_t cm0_baseaddr)
{
volatile u32 rst_active_status1;
volatile uint32_t rst_active_status1;
/* Set M0 memory mapping to point to start of M0 image */
CREG_M0APPMEMMAP = cm0_baseaddr;

2
lib/lpc43xx/ssp.c
View File

@@ -103,7 +103,7 @@ void ssp_wait_until_not_busy(ssp_num_t ssp_num)
}
/* This Function Wait Data TX Ready, and Write Data to SSP */
u16 ssp_transfer(ssp_num_t ssp_num, u16 data)
uint16_t ssp_transfer(ssp_num_t ssp_num, uint16_t data)
{
uint32_t ssp_port;

34
lib/lpc43xx/uart.c
View File

@@ -38,7 +38,7 @@
#define UART_CGU_AUTOBLOCK_CLOCK_BIT 11
#define UART_CGU_BASE_CLK_SEL_SHIFT 24 /* clock source selection (5 bits) */
u32 dummy_read;
uint32_t dummy_read;
/*
* UART Init function
@@ -47,12 +47,12 @@ void uart_init(uart_num_t uart_num,
uart_databit_t data_nb_bits,
uart_stopbit_t data_nb_stop,
uart_parity_t data_parity,
u16 uart_divisor,
u8 uart_divaddval,
u8 uart_mulval)
uint16_t uart_divisor,
uint8_t uart_divaddval,
uint8_t uart_mulval)
{
u32 lcr_config;
u32 uart_port;
uint32_t lcr_config;
uint32_t uart_port;
uart_port = uart_num;
@@ -167,8 +167,8 @@ void uart_init(uart_num_t uart_num,
*/
uart_rx_data_ready_t uart_rx_data_ready(uart_num_t uart_num)
{
u32 uart_port;
u8 uart_status;
uint32_t uart_port;
uint8_t uart_status;
uart_rx_data_ready_t data_ready;
uart_port = uart_num;
@@ -198,10 +198,10 @@ uart_rx_data_ready_t uart_rx_data_ready(uart_num_t uart_num)
/*
* This Function Wait until Data RX Ready, and return Data Read from UART.
*/
u8 uart_read(uart_num_t uart_num)
uint8_t uart_read(uart_num_t uart_num)
{
u32 uart_port;
u8 uart_val;
uint32_t uart_port;
uint8_t uart_val;
uart_port = uart_num;
@@ -216,11 +216,11 @@ u8 uart_read(uart_num_t uart_num)
/*
* This Function Wait until Data RX Ready, and return Data Read from UART.
*/
u8 uart_read_timeout(uart_num_t uart_num, u32 rx_timeout_nb_cycles, uart_error_t* error)
uint8_t uart_read_timeout(uart_num_t uart_num, uint32_t rx_timeout_nb_cycles, uart_error_t* error)
{
u32 uart_port;
u8 uart_val;
u32 counter;
uint32_t uart_port;
uint8_t uart_val;
uint32_t counter;
uart_port = uart_num;
@@ -250,9 +250,9 @@ u8 uart_read_timeout(uart_num_t uart_num, u32 rx_timeout_nb_cycles, uart_error_t
/* This Function Wait Data TX Ready, and Write Data to UART
if rx_timeout_nb_cycles = 0 Infinite wait
*/
void uart_write(uart_num_t uart_num, u8 data)
void uart_write(uart_num_t uart_num, uint8_t data)
{
u32 uart_port;
uint32_t uart_port;
uart_port = uart_num;