EMTime/libopencm3
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge branch 'master' into efm32

Browse Source 
Conflicts:
	Makefile
This commit is contained in:
chrysn
2012-04-19 17:28:55 +02:00
parent 705cdab7d7 66c5f91a87
commit 09fea0bc1b
44 changed files with 1907 additions and 153 deletions
Download Patch File Download Diff File Expand all files Collapse all files

124
examples/lpc17xx/Makefile.include Normal file
View File

@@ -0,0 +1,124 @@
##
## This file is part of the libopencm3 project.
##
## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
## Copyright (C) 2010 Piotr Esden-Tempski <piotr@esden.net>
##
## This library is free software: you can redistribute it and/or modify
## it under the terms of the GNU Lesser General Public License as published by
## the Free Software Foundation, either version 3 of the License, or
## (at your option) any later version.
##
## This library is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU Lesser General Public License for more details.
##
## You should have received a copy of the GNU Lesser General Public License
## along with this library. If not, see <http://www.gnu.org/licenses/>.
##
PREFIX ?= arm-none-eabi
#PREFIX ?= arm-elf
CC = $(PREFIX)-gcc
LD = $(PREFIX)-gcc
OBJCOPY = $(PREFIX)-objcopy
OBJDUMP = $(PREFIX)-objdump
# Uncomment this line if you want to use the installed (not local) library.
# TOOLCHAIN_DIR := $(shell dirname `which $(CC)`)/../$(PREFIX)
TOOLCHAIN_DIR = ../../../..
CFLAGS += -O0 -g -Wall -Wextra -I$(TOOLCHAIN_DIR)/include -fno-common \
-mcpu=cortex-m3 -mthumb -MD
LDSCRIPT ?= $(BINARY).ld
LDFLAGS += -L$(TOOLCHAIN_DIR)/lib -L$(TOOLCHAIN_DIR)/lib/lpc17xx \
-T$(LDSCRIPT) -nostartfiles -Wl,--gc-sections
OBJS += $(BINARY).o
OOCD ?= openocd
OOCD_INTERFACE ?= flossjtag
OOCD_BOARD ?= olimex_stm32_h103
# FIXME
# Be silent per default, but 'make V=1' will show all compiler calls.
ifneq ($(V),1)
Q := @
NULL := 2>/dev/null
else
LDFLAGS += -Wl,--print-gc-sections
endif
.SUFFIXES: .elf .bin .hex .srec .list .images
.SECONDEXPANSION:
.SECONDARY:
all: images
images: $(BINARY).images
flash: $(BINARY).flash
%.images: %.bin %.hex %.srec %.list
@#echo "*** $* images generated ***"
%.bin: %.elf
@#printf " OBJCOPY $(*).bin\n"
$(Q)$(OBJCOPY) -Obinary $(*).elf $(*).bin
%.hex: %.elf
@#printf " OBJCOPY $(*).hex\n"
$(Q)$(OBJCOPY) -Oihex $(*).elf $(*).hex
%.srec: %.elf
@#printf " OBJCOPY $(*).srec\n"
$(Q)$(OBJCOPY) -Osrec $(*).elf $(*).srec
%.list: %.elf
@#printf " OBJDUMP $(*).list\n"
$(Q)$(OBJDUMP) -S $(*).elf > $(*).list
%.elf: $(OBJS) $(LDSCRIPT) $(TOOLCHAIN_DIR)/lib/lpc17xx/libopencm3_lpc17xx.a
@#printf " LD $(subst $(shell pwd)/,,$(@))\n"
$(Q)$(LD) $(LDFLAGS) -o $(*).elf $(OBJS) -lopencm3_lpc17xx
%.o: %.c Makefile
@#printf " CC $(subst $(shell pwd)/,,$(@))\n"
$(Q)$(CC) $(CFLAGS) -o $@ -c $<
clean:
$(Q)rm -f *.o
$(Q)rm -f *.d
$(Q)rm -f *.elf
$(Q)rm -f *.bin
$(Q)rm -f *.hex
$(Q)rm -f *.srec
$(Q)rm -f *.list
# FIXME: Replace STM32 stuff with proper LPC13XX OpenOCD support later.
ifeq ($(OOCD_SERIAL),)
%.flash: %.hex
@printf " FLASH $<\n"
@# IMPORTANT: Don't use "resume", only "reset" will work correctly!
$(Q)$(OOCD) -f interface/$(OOCD_INTERFACE).cfg \
-f board/$(OOCD_BOARD).cfg \
-c "init" -c "reset init" \
-c "stm32x mass_erase 0" \
-c "flash write_image $(*).hex" \
-c "reset" \
-c "shutdown" $(NULL)
else
%.flash: %.hex
@printf " FLASH $<\n"
@# IMPORTANT: Don't use "resume", only "reset" will work correctly!
$(Q)$(OOCD) -f interface/$(OOCD_INTERFACE).cfg \
-f board/$(OOCD_BOARD).cfg \
-c "ft2232_serial $(OOCD_SERIAL)" \
-c "init" -c "reset init" \
-c "stm32x mass_erase 0" \
-c "flash write_image $(*).hex" \
-c "reset" \
-c "shutdown" $(NULL)
endif
.PHONY: images clean
-include $(OBJS:.o=.d)

32
examples/lpc17xx/blueboard-lpc1768-h/blueboard-lpc1768-h.ld Normal file
View File

@@ -0,0 +1,32 @@
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2010 Uwe Hermann <uwe@hermann-uwe.de>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
/* Linker script for Blueboard-LPC1768-H (LPC1768, 512K flash, 64K SRAM). */
/* Define memory regions. */
MEMORY
{
rom (rx) : ORIGIN = 0x00000000, LENGTH = 512K
ram (rwx) : ORIGIN = 0x10000000, LENGTH = 32K
ram1 (rwx) : ORIGIN = 0x2007C000, LENGTH = 16K
ram2 (rwx) : ORIGIN = 0x20080000, LENGTH = 16K
}
/* Include the common ld script. */
INCLUDE libopencm3_lpc17xx.ld

24
examples/lpc17xx/blueboard-lpc1768-h/miniblink/Makefile Normal file
View File

@@ -0,0 +1,24 @@
##
## This file is part of the libopencm3 project.
##
## Copyright (C) 2010 Uwe Hermann <uwe@hermann-uwe.de>
##
## This library is free software: you can redistribute it and/or modify
## it under the terms of the GNU Lesser General Public License as published by
## the Free Software Foundation, either version 3 of the License, or
## (at your option) any later version.
##
## This library is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU Lesser General Public License for more details.
##
## You should have received a copy of the GNU Lesser General Public License
## along with this library. If not, see <http://www.gnu.org/licenses/>.
##
BINARY = miniblink
LDSCRIPT = ../blueboard-lpc1768-h.ld
include ../../Makefile.include

9
examples/lpc17xx/blueboard-lpc1768-h/miniblink/README Normal file
View File

@@ -0,0 +1,9 @@
------------------------------------------------------------------------------
README
------------------------------------------------------------------------------
This is the smallest-possible example program using libopencm3.
It's intended for the NXP LPC1768-based NGX Blueboard-LPC1768-H eval board (see
http://shop.ngxtechnologies.com/product_info.php?cPath=21&products_id=65). It should blink
a LED on the board.

52
examples/lpc17xx/blueboard-lpc1768-h/miniblink/miniblink.c Normal file
View File

@@ -0,0 +1,52 @@
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2010 Uwe Hermann <uwe@hermann-uwe.de>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
#include <libopencm3/lpc17xx/gpio.h>
void gpio_setup(void)
{
GPIO1_DIR |= (1 << 29); /* Configure P1_29 as output. */
}
int main(void)
{
int i;
gpio_setup();
/* Blink LED0 (P3_0) on the board. */
while (1) {
/* Manually: */
//GPIO1_SET = (1 << 29); /* LED on */
//for (i = 0; i < 800000; i++) /* Wait a bit. */
// __asm__("nop");
//GPIO1_CLR = (1 << 29); /* LED off */
//for (i = 0; i < 800000; i++) /* Wait a bit. */
// __asm__("nop");
gpio_set(GPIO1, GPIOPIN29); /* LED on */
for (i = 0; i < 800000; i++) /* Wait a bit. */
__asm__("nop");
gpio_clear(GPIO1, GPIOPIN29); /* LED off */
for (i = 0; i < 800000; i++) /* Wait a bit. */
__asm__("nop");
}
return 0;
}

25
examples/stm32/f1/lisa-m-2/usart/Makefile Normal file
View File

@@ -0,0 +1,25 @@
##
## This file is part of the libopencm3 project.
##
## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
##
## This library is free software: you can redistribute it and/or modify
## it under the terms of the GNU Lesser General Public License as published by
## the Free Software Foundation, either version 3 of the License, or
## (at your option) any later version.
##
## This library is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU Lesser General Public License for more details.
##
## You should have received a copy of the GNU Lesser General Public License
## along with this library. If not, see <http://www.gnu.org/licenses/>.
##
BINARY = usart
LDSCRIPT = ../lisa-m.ld
include ../../Makefile.include

12
examples/stm32/f1/lisa-m-2/usart/README Normal file
View File

@@ -0,0 +1,12 @@
------------------------------------------------------------------------------
README
------------------------------------------------------------------------------
This example program sends some characters on USART2 on Lisa/M 2.0 board
(see http://paparazzi.enac.fr/wiki/LisaM for details).
The terminal settings for the receiving device/PC are 38400 8n1.
The sending is done in a blocking way in the code, see the usart_irq example
for a more elaborate USART example.

86
examples/stm32/f1/lisa-m-2/usart/usart.c Normal file
View File

@@ -0,0 +1,86 @@
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
#include <libopencm3/stm32/f1/rcc.h>
#include <libopencm3/stm32/f1/gpio.h>
#include <libopencm3/stm32/usart.h>
void clock_setup(void)
{
rcc_clock_setup_in_hse_12mhz_out_72mhz();
/* Enable GPIOA, GPIOB, GPIOC clock. */
rcc_peripheral_enable_clock(&RCC_APB2ENR,
RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN |
RCC_APB2ENR_IOPCEN);
/* Enable clocks for GPIO port B (for GPIO_USART3_TX) and USART3. */
rcc_peripheral_enable_clock(&RCC_APB1ENR,
RCC_APB1ENR_USART2EN);
}
void usart_setup(void)
{
/* Setup GPIO pin GPIO_USART2_TX. */
gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ,
GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO_USART2_TX);
/* Setup UART parameters. */
usart_set_baudrate(USART2, 38400);
usart_set_databits(USART2, 8);
usart_set_stopbits(USART2, USART_STOPBITS_1);
usart_set_mode(USART2, USART_MODE_TX);
usart_set_parity(USART2, USART_PARITY_NONE);
usart_set_flow_control(USART2, USART_FLOWCONTROL_NONE);
/* Finally enable the USART. */
usart_enable(USART2);
}
void gpio_setup(void)
{
/* Set GPIO8 (in GPIO port A) to 'output push-pull'. */
gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_2_MHZ,
GPIO_CNF_OUTPUT_PUSHPULL, GPIO8);
}
int main(void)
{
int i, j = 0, c = 0;
clock_setup();
gpio_setup();
usart_setup();
/* Blink the LED (PA8) on the board with every transmitted byte. */
while (1) {
gpio_toggle(GPIOA, GPIO8); /* LED on/off */
usart_send_blocking(USART2, c + '0'); /* USART2: Send byte. */
c = (c == 9) ? 0 : c + 1; /* Increment c. */
if ((j++ % 80) == 0) { /* Newline after line full. */
usart_send_blocking(USART2, '\r');
usart_send_blocking(USART2, '\n');
}
for (i = 0; i < 800000; i++) /* Wait a bit. */
__asm__("nop");
}
return 0;
}

25
examples/stm32/f1/lisa-m-2/usart_dma/Makefile Normal file
View File

@@ -0,0 +1,25 @@
##
## This file is part of the libopencm3 project.
##
## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
##
## This library is free software: you can redistribute it and/or modify
## it under the terms of the GNU Lesser General Public License as published by
## the Free Software Foundation, either version 3 of the License, or
## (at your option) any later version.
##
## This library is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU Lesser General Public License for more details.
##
## You should have received a copy of the GNU Lesser General Public License
## along with this library. If not, see <http://www.gnu.org/licenses/>.
##
BINARY = usart_dma
LDSCRIPT = ../lisa-m.ld
include ../../Makefile.include

199
examples/stm32/f1/lisa-m-2/usart_dma/usart_dma.c Normal file
View File

@@ -0,0 +1,199 @@
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
#include <libopencm3/stm32/f1/rcc.h>
#include <libopencm3/stm32/f1/gpio.h>
#include <libopencm3/stm32/usart.h>
#include <libopencm3/stm32/f1/dma.h>
#include <libopencm3/stm32/nvic.h>
void clock_setup(void)
{
rcc_clock_setup_in_hse_12mhz_out_72mhz();
/* Enable GPIOA, GPIOB, GPIOC clock. */
rcc_peripheral_enable_clock(&RCC_APB2ENR,
RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN |
RCC_APB2ENR_IOPCEN);
/* Enable clocks for GPIO port B (for GPIO_USART3_TX) and USART3. */
rcc_peripheral_enable_clock(&RCC_APB1ENR,
RCC_APB1ENR_USART2EN);
/* Enable DMA1 clock */
rcc_peripheral_enable_clock(&RCC_AHBENR, RCC_AHBENR_DMA1EN);
}
void usart_setup(void)
{
/* Setup GPIO pin GPIO_USART2_TX and GPIO_USART2_RX. */
gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ,
GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO_USART2_TX);
gpio_set_mode(GPIOA, GPIO_MODE_INPUT,
GPIO_CNF_INPUT_FLOAT, GPIO_USART2_RX);
/* Setup UART parameters. */
usart_set_baudrate(USART2, 38400);
usart_set_databits(USART2, 8);
usart_set_stopbits(USART2, USART_STOPBITS_1);
usart_set_mode(USART2, USART_MODE_TX_RX);
usart_set_parity(USART2, USART_PARITY_NONE);
usart_set_flow_control(USART2, USART_FLOWCONTROL_NONE);
/* Finally enable the USART. */
usart_enable(USART2);
nvic_set_priority(NVIC_DMA1_CHANNEL7_IRQ, 0);
nvic_enable_irq(NVIC_DMA1_CHANNEL7_IRQ);
nvic_set_priority(NVIC_DMA1_CHANNEL6_IRQ, 0);
nvic_enable_irq(NVIC_DMA1_CHANNEL6_IRQ);
}
void dma_write(char *data, int size)
{
/*
* Using channel 7 for USART2_TX
*/
/* Reset DMA channel*/
dma_channel_reset(DMA1, DMA_CHANNEL7);
dma_set_peripheral_address(DMA1, DMA_CHANNEL7, (u32)&USART2_DR);
dma_set_memory_address(DMA1, DMA_CHANNEL7, (u32)data);
dma_set_number_of_data(DMA1, DMA_CHANNEL7, size);
dma_set_read_from_memory(DMA1, DMA_CHANNEL7);
dma_enable_memory_increment_mode(DMA1, DMA_CHANNEL7);
dma_set_peripheral_size(DMA1, DMA_CHANNEL7, DMA_CCR_PSIZE_8BIT);
dma_set_memory_size(DMA1, DMA_CHANNEL7, DMA_CCR_MSIZE_8BIT);
dma_set_priority(DMA1, DMA_CHANNEL7, DMA_CCR_PL_VERY_HIGH);
dma_enable_transfer_complete_interrupt(DMA1, DMA_CHANNEL7);
dma_enable_channel(DMA1, DMA_CHANNEL7);
usart_enable_tx_dma(USART2);
}
volatile int transfered = 0;
void dma1_channel7_isr(void)
{
if ((DMA1_ISR &DMA_ISR_TCIF7) != 0) {
DMA1_IFCR |= DMA_IFCR_CTCIF7;
transfered = 1;
}
dma_disable_transfer_complete_interrupt(DMA1, DMA_CHANNEL7);
usart_disable_tx_dma(USART2);
dma_disable_channel(DMA1, DMA_CHANNEL7);
}
void dma_read(char *data, int size)
{
/*
* Using channel 6 for USART2_RX
*/
/* Reset DMA channel*/
dma_channel_reset(DMA1, DMA_CHANNEL6);
dma_set_peripheral_address(DMA1, DMA_CHANNEL6, (u32)&USART2_DR);
dma_set_memory_address(DMA1, DMA_CHANNEL6, (u32)data);
dma_set_number_of_data(DMA1, DMA_CHANNEL6, size);
dma_set_read_from_peripheral(DMA1, DMA_CHANNEL6);
dma_enable_memory_increment_mode(DMA1, DMA_CHANNEL6);
dma_set_peripheral_size(DMA1, DMA_CHANNEL6, DMA_CCR_PSIZE_8BIT);
dma_set_memory_size(DMA1, DMA_CHANNEL6, DMA_CCR_MSIZE_8BIT);
dma_set_priority(DMA1, DMA_CHANNEL6, DMA_CCR_PL_HIGH);
dma_enable_transfer_complete_interrupt(DMA1, DMA_CHANNEL6);
dma_enable_channel(DMA1, DMA_CHANNEL6);
usart_enable_rx_dma(USART2);
}
volatile int received = 0;
void dma1_channel6_isr(void)
{
if ((DMA1_ISR &DMA_ISR_TCIF6) != 0) {
DMA1_IFCR |= DMA_IFCR_CTCIF6;
received = 1;
}
dma_disable_transfer_complete_interrupt(DMA1, DMA_CHANNEL6);
usart_disable_rx_dma(USART2);
dma_disable_channel(DMA1, DMA_CHANNEL6);
}
void gpio_setup(void)
{
/* Set GPIO8 (in GPIO port A) to 'output push-pull'. */
gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_2_MHZ,
GPIO_CNF_OUTPUT_PUSHPULL, GPIO8);
}
int main(void)
{
char tx[10] = "abcdefg\r\n";
int tx_len = 10;
char rx[7] = "bcdefg";
int rx_len = 6;
clock_setup();
gpio_setup();
usart_setup();
transfered = 0;
dma_write(tx, tx_len);
received = 0;
dma_read(rx, rx_len);
/* Blink the LED (PA8) on the board with every transmitted byte. */
while (1) {
gpio_toggle(GPIOA, GPIO8); /* LED on/off */
while ( transfered != 1) {
if (received == 1) {
tx[1] = rx[0];
tx[2] = rx[1];
tx[3] = rx[2];
tx[4] = rx[3];
tx[5] = rx[4];
tx[6] = rx[5];
received = 0;
dma_read(rx, rx_len);
}
}
tx[0]++;
if (tx[0] > 'z') tx[0] = 'a';
transfered = 0;
dma_write(tx, tx_len);
}
return 0;
}

25
examples/stm32/f1/lisa-m-2/usart_irq/Makefile Normal file
View File

@@ -0,0 +1,25 @@
##
## This file is part of the libopencm3 project.
##
## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
##
## This library is free software: you can redistribute it and/or modify
## it under the terms of the GNU Lesser General Public License as published by
## the Free Software Foundation, either version 3 of the License, or
## (at your option) any later version.
##
## This library is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU Lesser General Public License for more details.
##
## You should have received a copy of the GNU Lesser General Public License
## along with this library. If not, see <http://www.gnu.org/licenses/>.
##
BINARY = usart_irq
LDSCRIPT = ../lisa-m.ld
include ../../Makefile.include

126
examples/stm32/f1/lisa-m-2/usart_irq/usart_irq.c Normal file
View File

@@ -0,0 +1,126 @@
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
#include <libopencm3/stm32/f1/rcc.h>
#include <libopencm3/stm32/f1/gpio.h>
#include <libopencm3/stm32/usart.h>
#include <libopencm3/stm32/nvic.h>
void clock_setup(void)
{
rcc_clock_setup_in_hse_12mhz_out_72mhz();
/* Enable GPIOA clock (for LED GPIOs). */
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPCEN);
/* Enable clocks for GPIO port A (for GPIO_USART2_TX) and USART2. */
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN |
RCC_APB2ENR_AFIOEN);
rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_USART2EN);
}
void usart_setup(void)
{
/* Enable the USART2 interrupt. */
nvic_enable_irq(NVIC_USART2_IRQ);
/* Setup GPIO pin GPIO_USART2_TX on GPIO port A for transmit. */
gpio_set_mode(GPIO_BANK_USART2_TX, GPIO_MODE_OUTPUT_50_MHZ,
GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO_USART2_TX);
/* Setup GPIO pin GPIO_USART2_RX on GPIO port A for receive. */
gpio_set_mode(GPIO_BANK_USART2_RX, GPIO_MODE_INPUT,
GPIO_CNF_INPUT_FLOAT, GPIO_USART2_RX);
/* Setup UART parameters. */
usart_set_baudrate(USART2, 230400);
usart_set_databits(USART2, 8);
usart_set_stopbits(USART2, USART_STOPBITS_1);
usart_set_parity(USART2, USART_PARITY_NONE);
usart_set_flow_control(USART2, USART_FLOWCONTROL_NONE);
usart_set_mode(USART2, USART_MODE_TX_RX);
/* Enable USART2 Receive interrupt. */
USART_CR1(USART2) |= USART_CR1_RXNEIE;
/* Finally enable the USART. */
usart_enable(USART2);
}
void gpio_setup(void)
{
gpio_set(GPIOA, GPIO8);
/* Setup GPIO8 (in GPIO port A) for LED use. */
gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ,
GPIO_CNF_OUTPUT_PUSHPULL, GPIO8);
gpio_set(GPIOC, GPIO15);
/* Setup GPIO15 (in GPIO port C) for LED use. */
gpio_set_mode(GPIOC, GPIO_MODE_OUTPUT_50_MHZ,
GPIO_CNF_OUTPUT_PUSHPULL, GPIO15);
}
void usart2_isr(void)
{
static u8 data = 'A';
/* Check if we were called because of RXNE. */
if (((USART_CR1(USART2) & USART_CR1_RXNEIE) != 0) &&
((USART_SR(USART2) & USART_SR_RXNE) != 0)) {
/* Indicate that we got data. */
gpio_toggle(GPIOA, GPIO8);
/* Retrieve the data from the peripheral. */
data = usart_recv(USART2);
/* Enable transmit interrupt so it sends back the data. */
USART_CR1(USART2) |= USART_CR1_TXEIE;
}
/* Check if we were called because of TXE. */
if (((USART_CR1(USART2) & USART_CR1_TXEIE) != 0) &&
((USART_SR(USART2) & USART_SR_TXE) != 0)) {
/* Indicate that we are sending out data. */
gpio_toggle(GPIOC, GPIO15);
/* Put data into the transmit register. */
usart_send(USART2, data);
/* Disable the TXE interrupt as we don't need it anymore. */
USART_CR1(USART2) &= ~USART_CR1_TXEIE;
}
}
int main(void)
{
clock_setup();
gpio_setup();
usart_setup();
/* Wait forever and do nothing. */
while (1)
__asm__("nop");
return 0;
}

25
examples/stm32/f1/lisa-m-2/usart_irq_printf/Makefile Normal file
View File

@@ -0,0 +1,25 @@
##
## This file is part of the libopencm3 project.
##
## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
##
## This library is free software: you can redistribute it and/or modify
## it under the terms of the GNU Lesser General Public License as published by
## the Free Software Foundation, either version 3 of the License, or
## (at your option) any later version.
##
## This library is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU Lesser General Public License for more details.
##
## You should have received a copy of the GNU Lesser General Public License
## along with this library. If not, see <http://www.gnu.org/licenses/>.
##
BINARY = usart_irq_printf
LDSCRIPT = ../lisa-m.ld
include ../../Makefile.include

269
examples/stm32/f1/lisa-m-2/usart_irq_printf/usart_irq_printf.c Normal file
View File

@@ -0,0 +1,269 @@
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>,
* Copyright (C) 2011 Piotr Esden-Tempski <piotr@esden.net>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
#include <libopencm3/stm32/f1/rcc.h>
#include <libopencm3/stm32/f1/gpio.h>
#include <libopencm3/stm32/usart.h>
#include <libopencm3/stm32/nvic.h>
#include <libopencm3/stm32/systick.h>
#include <stdio.h>
#include <errno.h>
/******************************************************************************
* Simple ringbuffer implementation from open-bldc's libgovernor that
* you can find at:
* https://github.com/open-bldc/open-bldc/tree/master/source/libgovernor
*****************************************************************************/
typedef s32 ring_size_t;
struct ring {
u8 *data;
ring_size_t size;
u32 begin;
u32 end;
};
#define RING_SIZE(RING) ((RING)->size - 1)
#define RING_DATA(RING) (RING)->data
#define RING_EMPTY(RING) ((RING)->begin == (RING)->end)
void ring_init(struct ring *ring, u8 *buf, ring_size_t size)
{
ring->data = buf;
ring->size = size;
ring->begin = 0;
ring->end = 0;
}
s32 ring_write_ch(struct ring *ring, u8 ch)
{
if (((ring->end + 1) % ring->size) != ring->begin) {
ring->data[ring->end++] = ch;
ring->end %= ring->size;
return (u32)ch;
}
return -1;
}
s32 ring_write(struct ring *ring, u8 *data, ring_size_t size)
{
s32 i;
for (i = 0; i < size; i++) {
if (ring_write_ch(ring, data[i]) < 0)
return -i;
}
return i;
}
s32 ring_read_ch(struct ring *ring, u8 *ch)
{
s32 ret = -1;
if (ring->begin != ring->end) {
ret = ring->data[ring->begin++];
ring->begin %= ring->size;
if (ch)
*ch = ret;
}
return ret;
}
s32 ring_read(struct ring *ring, u8 *data, ring_size_t size)
{
s32 i;
for (i = 0; i < size; i++) {
if (ring_read_ch(ring, data + i) < 0)
return i;
}
return -i;
}
/******************************************************************************
* The example implementation
*****************************************************************************/
#define BUFFER_SIZE 1024
struct ring output_ring;
u8 output_ring_buffer[BUFFER_SIZE];
void clock_setup(void)
{
rcc_clock_setup_in_hse_12mhz_out_72mhz();
/* Enable GPIOA clock (for LED GPIOs). */
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN);
/* Enable clocks for GPIO port A (for GPIO_USART2_TX) and USART2. */
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN |
RCC_APB2ENR_AFIOEN);
rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_USART2EN);
}
void usart_setup(void)
{
/* Initialize output ring buffer. */
ring_init(&output_ring, output_ring_buffer, BUFFER_SIZE);
/* Enable the USART2 interrupt. */
nvic_enable_irq(NVIC_USART2_IRQ);
/* Setup GPIO pin GPIO_USART2_TX on GPIO port A for transmit. */
gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ,
GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO_USART2_TX);
/* Setup GPIO pin GPIO_USART2_RX on GPIO port A for receive. */
gpio_set_mode(GPIOA, GPIO_MODE_INPUT,
GPIO_CNF_INPUT_FLOAT, GPIO_USART2_RX);
/* Setup UART parameters. */
usart_set_baudrate(USART2, 230400);
usart_set_databits(USART2, 8);
usart_set_stopbits(USART2, USART_STOPBITS_1);
usart_set_parity(USART2, USART_PARITY_NONE);
usart_set_flow_control(USART2, USART_FLOWCONTROL_NONE);
usart_set_mode(USART2, USART_MODE_TX_RX);
/* Enable USART2 Receive interrupt. */
USART_CR1(USART2) |= USART_CR1_RXNEIE;
/* Finally enable the USART. */
usart_enable(USART2);
}
void gpio_setup(void)
{
gpio_set(GPIOA, GPIO8);
/* Setup GPIO8 (in GPIO port A) for LED use. */
gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ,
GPIO_CNF_OUTPUT_PUSHPULL, GPIO8);
}
void usart2_isr(void)
{
/* Check if we were called because of RXNE. */
if (((USART_CR1(USART2) & USART_CR1_RXNEIE) != 0) &&
((USART_SR(USART2) & USART_SR_RXNE) != 0)) {
/* Indicate that we got data. */
gpio_toggle(GPIOA, GPIO8);
/* Retrieve the data from the peripheral. */
ring_write_ch(&output_ring, usart_recv(USART2));
/* Enable transmit interrupt so it sends back the data. */
USART_CR1(USART2) |= USART_CR1_TXEIE;
}
/* Check if we were called because of TXE. */
if (((USART_CR1(USART2) & USART_CR1_TXEIE) != 0) &&
((USART_SR(USART2) & USART_SR_TXE) != 0)) {
s32 data;
data = ring_read_ch(&output_ring, NULL);
if (data == -1) {
/* Disable the TXE interrupt, it's no longer needed. */
USART_CR1(USART2) &= ~USART_CR1_TXEIE;
} else {
/* Put data into the transmit register. */
usart_send(USART2, data);
}
}
}
int _write(int file, char *ptr, int len)
{
int ret;
if (file == 1) {
ret = ring_write(&output_ring, (u8 *)ptr, len);
if (ret < 0)
ret = -ret;
USART_CR1(USART2) |= USART_CR1_TXEIE;
return ret;
}
errno = EIO;
return -1;
}
void systick_setup(void)
{
/* 72MHz / 8 => 9000000 counts per second. */
systick_set_clocksource(STK_CTRL_CLKSOURCE_AHB_DIV8);
/* 9000000/9000 = 1000 overflows per second - every 1ms one interrupt */
systick_set_reload(9000);
systick_interrupt_enable();
/* Start counting. */
systick_counter_enable();
}
void sys_tick_handler(void)
{
static int counter = 0;
static float fcounter = 0.0;
static double dcounter = 0.0;
static u32 temp32 = 0;
temp32++;
/*
* We call this handler every 1ms so we are sending hello world
* every 10ms / 100Hz.
*/
if (temp32 == 10) {
printf("Hello World! %i %f %f\r\n", counter, fcounter,
dcounter);
counter++;
fcounter += 0.01;
dcounter += 0.01;
temp32 = 0;
}
}
int main(void)
{
clock_setup();
gpio_setup();
usart_setup();
systick_setup();
while (1)
__asm__("nop");
return 0;
}

25
examples/stm32/f1/lisa-m-2/usart_printf/Makefile Normal file
View File

@@ -0,0 +1,25 @@
##
## This file is part of the libopencm3 project.
##
## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
##
## This library is free software: you can redistribute it and/or modify
## it under the terms of the GNU Lesser General Public License as published by
## the Free Software Foundation, either version 3 of the License, or
## (at your option) any later version.
##
## This library is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU Lesser General Public License for more details.
##
## You should have received a copy of the GNU Lesser General Public License
## along with this library. If not, see <http://www.gnu.org/licenses/>.
##
BINARY = usart_printf
LDSCRIPT = ../lisa-m.ld
include ../../Makefile.include

106
examples/stm32/f1/lisa-m-2/usart_printf/usart_printf.c Normal file
View File

@@ -0,0 +1,106 @@
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>,
* Copyright (C) 2011-2012 Piotr Esden-Tempski <piotr@esden.net>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
#include <libopencm3/stm32/f1/rcc.h>
#include <libopencm3/stm32/f1/gpio.h>
#include <libopencm3/stm32/usart.h>
#include <libopencm3/stm32/nvic.h>
#include <stdio.h>
#include <errno.h>
void clock_setup(void)
{
rcc_clock_setup_in_hse_12mhz_out_72mhz();
/* Enable GPIOA clock (for LED GPIOs). */
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPCEN);
/* Enable clocks for GPIO port A (for GPIO_USART2_TX) and USART2. */
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN |
RCC_APB2ENR_AFIOEN);
rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_USART2EN);
}
void usart_setup(void)
{
/* Setup GPIO pin GPIO_USART2_RE_TX on GPIO port B for transmit. */
gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ,
GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO_USART2_TX);
/* Setup UART parameters. */
usart_set_baudrate(USART2, 230400);
usart_set_databits(USART2, 8);
usart_set_stopbits(USART2, USART_STOPBITS_1);
usart_set_parity(USART2, USART_PARITY_NONE);
usart_set_flow_control(USART2, USART_FLOWCONTROL_NONE);
usart_set_mode(USART2, USART_MODE_TX);
/* Finally enable the USART. */
usart_enable(USART2);
}
void gpio_setup(void)
{
gpio_set(GPIOA, GPIO8);
/* Setup GPIO8 (in GPIO port A) for LED use. */
gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ,
GPIO_CNF_OUTPUT_PUSHPULL, GPIO8);
}
int _write(int file, char *ptr, int len)
{
int i;
if (file == 1) {
for (i = 0; i < len; i++)
usart_send_blocking(USART2, ptr[i]);
return i;
}
errno = EIO;
return -1;
}
int main(void)
{
int counter = 0;
float fcounter = 0.0;
double dcounter = 0.0;
clock_setup();
gpio_setup();
usart_setup();
/*
* Write Hello World, an integer, float and double all over
* again while incrementing the numbers.
*/
while (1) {
gpio_toggle(GPIOA, GPIO8);
printf("Hello World! %i %f %f\r\n", counter, fcounter,
dcounter);
counter++;
fcounter += 0.01;
dcounter += 0.01;
}
return 0;
}

2
examples/stm32/f1/stm32-h103/usb_iap/usbiap.c
View File

@@ -149,7 +149,7 @@ static void usbdfu_getstatus_complete(struct usb_setup_data *req)
u32 baseaddr = prog.addr + ((prog.blocknum - 2) *
dfu_function.wTransferSize);
for (i = 0; i < prog.len; i += 2)
flash_library_half_word(baseaddr + i,
flash_program_half_word(baseaddr + i,
*(u16 *)(prog.buf + i));
}
flash_lock();

6
examples/stm32/f2/jobygps/jobygps.ld
View File

@@ -4,16 +4,16 @@
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser Lesser General Public License as published by
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser Lesser General Public License for more details.
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser Lesser General Public License
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/