EMTime/libopencm3
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Updates for STM32F429 chip

Browse Source 
After a few rounds of review, changes are added to support
additional peripherals of the STM32F427/429
This commit is contained in:
cmcmanis
2014-01-01 11:52:50 -08:00
committed by Frantisek Burian
parent 3fc84d6519
commit 07d0076934
9 changed files with 410 additions and 16 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
lib/stm32/f4/Makefile
View File

@@ -50,7 +50,7 @@ OBJS += crc_common_all.o dac_common_all.o dma_common_f24.o \
OBJS += usb.o usb_standard.o usb_control.o usb_fx07_common.o \
usb_f107.o usb_f207.o
OBJS += mac.o phy.o mac_stm32fxx7.o phy_ksz8051mll.o
OBJS += mac.o phy.o mac_stm32fxx7.o phy_ksz8051mll.o fmc.o
VPATH += ../../usb:../:../../cm3:../common
VPATH += ../../ethernet

99
lib/stm32/f4/fmc.c Normal file
View File

@@ -0,0 +1,99 @@
/* vim: set noexpandtab ts=8:
*
* This file is part of the libopencm3 project.
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
/* Utility functions for the SDRAM component of the FMC */
#include <stdint.h>
#include <libopencm3/stm32/fsmc.h>
/*
* Install various timing values into the correct place in the
* SDRAM Timing Control Register format.
*
* Note that the register is 'zero' based to save bits so 1 cycle
* is stored as '0'. This command takes actual cycles and adjusts
* by subtracting 1.
*/
uint32_t
sdram_timing(struct sdram_timing *t) {
uint32_t result;
result = 0;
result |= ((t->trcd - 1) & 0xf) * FMC_SDTR_TRCD_SHIFT;
result |= ((t->trp - 1) & 0xf) * FMC_SDTR_TRP_SHIFT;
result |= ((t->twr - 1) & 0xf) * FMC_SDTR_TWR_SHIFT;
result |= ((t->trc - 1) & 0xf) * FMC_SDTR_TRC_SHIFT;
result |= ((t->tras - 1) & 0xf) * FMC_SDTR_TRAS_SHIFT;
result |= ((t->txsr - 1) & 0xf) * FMC_SDTR_TXSR_SHIFT;
result |= ((t->tmrd - 1) & 0xf) * FMC_SDTR_TMRD_SHIFT;
return result;
}
/*
* Send a command to the SDRAM controller, wait until it is not
* busy before sending. This allows you to chain sending commands
* and the code will pause as needed between them.
*/
void
sdram_command(enum fmc_sdram_bank bank,
enum fmc_sdram_command cmd, int autorefresh, int modereg) {
uint32_t tmp_reg = 0;
switch (bank) {
case SDRAM_BANK1:
tmp_reg = FMC_SDCMR_CTB1;
break;
case SDRAM_BANK2:
tmp_reg = FMC_SDCMR_CTB2;
break;
case SDRAM_BOTH_BANKS:
tmp_reg = FMC_SDCMR_CTB1 | FMC_SDCMR_CTB2;
break;
}
tmp_reg |= autorefresh * FMC_SDCMR_NRFS_SHIFT;
tmp_reg |= modereg * FMC_SDCMR_MRD_SHIFT;
switch (cmd) {
case SDRAM_CLK_CONF:
tmp_reg |= FMC_SDCMR_MODE_CLOCK_CONFIG_ENA;
break;
case SDRAM_AUTO_REFRESH:
tmp_reg |= FMC_SDCMR_MODE_AUTO_REFRESH;
break;
case SDRAM_LOAD_MODE:
tmp_reg |= FMC_SDCMR_MODE_LOAD_MODE_REGISTER;
break;
case SDRAM_PALL:
tmp_reg |= FMC_SDCMR_MODE_PALL;
break;
case SDRAM_SELF_REFRESH:
tmp_reg |= FMC_SDCMR_MODE_SELF_REFRESH;
break;
case SDRAM_POWER_DOWN:
tmp_reg |= FMC_SDCMR_MODE_POWER_DOWN;
break;
case SDRAM_NORMAL:
default:
break;
}
/* Wait for the next chance to talk to the controller */
while (FMC_SDSR & FMC_SDSR_BUSY) ;
/* Send the next command */
FMC_SDCMR = tmp_reg;
}