c03b580722
__WFI is not standardized, though often provided. As it's not a core part of this example, drop it.
165 lines
3.9 KiB
C
165 lines
3.9 KiB
C
/*
|
|
* This file is part of the libopencm3 project.
|
|
*
|
|
* Copyright (C) 2015 Piotr Esden-Tempski <piotr@esden.net>
|
|
* Copyright (C) 2015 Jack Ziesing <jziesing@gmail.com>
|
|
*
|
|
* This library is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU Lesser General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public License
|
|
* along with this library. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <libopencm3/cm3/nvic.h>
|
|
#include <libopencm3/stm32/rcc.h>
|
|
#include <libopencm3/stm32/gpio.h>
|
|
#include <libopencm3/stm32/timer.h>
|
|
|
|
#ifndef ARRAY_LEN
|
|
#define ARRAY_LEN(array) (sizeof((array))/sizeof((array)[0]))
|
|
#endif
|
|
|
|
#define LED1_PORT GPIOD
|
|
#define LED1_PIN GPIO12
|
|
|
|
/* Morse standard timings */
|
|
#define ELEMENT_TIME 500
|
|
#define DIT (1*ELEMENT_TIME)
|
|
#define DAH (3*ELEMENT_TIME)
|
|
#define INTRA (1*ELEMENT_TIME)
|
|
#define INTER (3*ELEMENT_TIME)
|
|
#define WORD (7*ELEMENT_TIME)
|
|
|
|
uint16_t frequency_sequence[] = {
|
|
DIT,
|
|
INTRA,
|
|
DIT,
|
|
INTRA,
|
|
DIT,
|
|
INTER,
|
|
DAH,
|
|
INTRA,
|
|
DAH,
|
|
INTRA,
|
|
DAH,
|
|
INTER,
|
|
DIT,
|
|
INTRA,
|
|
DIT,
|
|
INTRA,
|
|
DIT,
|
|
WORD,
|
|
};
|
|
|
|
int frequency_sel = 0;
|
|
|
|
static void clock_setup(void)
|
|
{
|
|
rcc_clock_setup_hse_3v3(&rcc_hse_8mhz_3v3[RCC_CLOCK_3V3_168MHZ]);
|
|
}
|
|
|
|
static void gpio_setup(void)
|
|
{
|
|
/* Enable GPIO clock for leds. */
|
|
rcc_periph_clock_enable(RCC_GPIOD);
|
|
|
|
/* Enable led as output */
|
|
gpio_mode_setup(LED1_PORT, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, LED1_PIN);
|
|
gpio_set(LED1_PORT, LED1_PIN);
|
|
}
|
|
|
|
static void tim_setup(void)
|
|
{
|
|
/* Enable TIM2 clock. */
|
|
rcc_periph_clock_enable(RCC_TIM2);
|
|
|
|
/* Enable TIM2 interrupt. */
|
|
nvic_enable_irq(NVIC_TIM2_IRQ);
|
|
|
|
/* Reset TIM2 peripheral to defaults. */
|
|
rcc_periph_reset_pulse(RST_TIM2);
|
|
|
|
/* Timer global mode:
|
|
* - No divider
|
|
* - Alignment edge
|
|
* - Direction up
|
|
* (These are actually default values after reset above, so this call
|
|
* is strictly unnecessary, but demos the api for alternative settings)
|
|
*/
|
|
timer_set_mode(TIM2, TIM_CR1_CKD_CK_INT,
|
|
TIM_CR1_CMS_EDGE, TIM_CR1_DIR_UP);
|
|
|
|
/*
|
|
* Please take note that the clock source for STM32 timers
|
|
* might not be the raw APB1/APB2 clocks. In various conditions they
|
|
* are doubled. See the Reference Manual for full details!
|
|
* In our case, TIM2 on APB1 is running at double frequency, so this
|
|
* sets the prescaler to have the timer run at 5kHz
|
|
*/
|
|
timer_set_prescaler(TIM2, ((rcc_apb1_frequency * 2) / 5000));
|
|
|
|
/* Disable preload. */
|
|
timer_disable_preload(TIM2);
|
|
timer_continuous_mode(TIM2);
|
|
|
|
/* count full range, as we'll update compare value continuously */
|
|
timer_set_period(TIM2, 65535);
|
|
|
|
/* Set the initual output compare value for OC1. */
|
|
timer_set_oc_value(TIM2, TIM_OC1, frequency_sequence[frequency_sel++]);
|
|
|
|
/* Counter enable. */
|
|
timer_enable_counter(TIM2);
|
|
|
|
/* Enable Channel 1 compare interrupt to recalculate compare values */
|
|
timer_enable_irq(TIM2, TIM_DIER_CC1IE);
|
|
}
|
|
|
|
void tim2_isr(void)
|
|
{
|
|
if (timer_get_flag(TIM2, TIM_SR_CC1IF)) {
|
|
|
|
/* Clear compare interrupt flag. */
|
|
timer_clear_flag(TIM2, TIM_SR_CC1IF);
|
|
|
|
/*
|
|
* Get current timer value to calculate next
|
|
* compare register value.
|
|
*/
|
|
uint16_t compare_time = timer_get_counter(TIM2);
|
|
|
|
/* Calculate and set the next compare value. */
|
|
uint16_t frequency = frequency_sequence[frequency_sel++];
|
|
uint16_t new_time = compare_time + frequency;
|
|
|
|
timer_set_oc_value(TIM2, TIM_OC1, new_time);
|
|
if (frequency_sel == ARRAY_LEN(frequency_sequence)) {
|
|
frequency_sel = 0;
|
|
}
|
|
|
|
/* Toggle LED to indicate compare event. */
|
|
gpio_toggle(LED1_PORT, LED1_PIN);
|
|
}
|
|
}
|
|
|
|
int main(void)
|
|
{
|
|
clock_setup();
|
|
gpio_setup();
|
|
tim_setup();
|
|
|
|
while (1) {
|
|
;
|
|
}
|
|
|
|
return 0;
|
|
}
|