2092a6759d
This brings in the new ADC api for STM32 parts. Update to new standardized ADC apis. Drops pointless channel definitions, uses common names for common functions. No functional changes. Based on work in: https://github.com/libopencm3/libopencm3-examples/pull/130
161 lines
4.2 KiB
C
161 lines
4.2 KiB
C
/*
|
|
* This file is part of the libopencm3 project.
|
|
*
|
|
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
|
|
* Copyright (C) 2011 Stephen Caudle <scaudle@doceme.com>
|
|
* Modified by Fernando Cortes <fermando.corcam@gmail.com>
|
|
* modified by Guillermo Rivera <memogrg@gmail.com>
|
|
*
|
|
* This library is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU Lesser General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public License
|
|
* along with this library. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <libopencm3/stm32/rcc.h>
|
|
#include <libopencm3/stm32/adc.h>
|
|
#include <libopencm3/stm32/usart.h>
|
|
#include <libopencm3/stm32/gpio.h>
|
|
|
|
#define LBLUE GPIOE, GPIO8
|
|
#define LRED GPIOE, GPIO9
|
|
#define LORANGE GPIOE, GPIO10
|
|
#define LGREEN GPIOE, GPIO11
|
|
#define LBLUE2 GPIOE, GPIO12
|
|
#define LRED2 GPIOE, GPIO13
|
|
#define LORANGE2 GPIOE, GPIO14
|
|
#define LGREEN2 GPIOE, GPIO15
|
|
|
|
#define LD4 GPIOE, GPIO8
|
|
#define LD3 GPIOE, GPIO9
|
|
#define LD5 GPIOE, GPIO10
|
|
#define LD7 GPIOE, GPIO11
|
|
#define LD9 GPIOE, GPIO12
|
|
#define LD10 GPIOE, GPIO13
|
|
#define LD8 GPIOE, GPIO14
|
|
#define LD6 GPIOE, GPIO15
|
|
|
|
|
|
static void adc_setup(void)
|
|
{
|
|
//ADC
|
|
rcc_periph_clock_enable(RCC_ADC12);
|
|
rcc_periph_clock_enable(RCC_GPIOA);
|
|
//ADC
|
|
gpio_mode_setup(GPIOA, GPIO_MODE_ANALOG, GPIO_PUPD_NONE, GPIO0);
|
|
gpio_mode_setup(GPIOA, GPIO_MODE_ANALOG, GPIO_PUPD_NONE, GPIO1);
|
|
adc_power_off(ADC1);
|
|
adc_set_clk_prescale(ADC1, ADC_CCR_CKMODE_DIV2);
|
|
adc_set_single_conversion_mode(ADC1);
|
|
adc_disable_external_trigger_regular(ADC1);
|
|
adc_set_right_aligned(ADC1);
|
|
/* We want to read the temperature sensor, so we have to enable it. */
|
|
adc_enable_temperature_sensor();
|
|
adc_set_sample_time_on_all_channels(ADC1, ADC_SMPR_SMP_61DOT5CYC);
|
|
uint8_t channel_array[16];
|
|
channel_array[0]=16; // Vts (Internal temperature sensor
|
|
channel_array[0]=1; //ADC1_IN1 (PA0)
|
|
adc_set_regular_sequence(ADC1, 1, channel_array);
|
|
adc_set_resolution(ADC1, ADC_CFGR1_RES_12_BIT);
|
|
adc_power_on(ADC1);
|
|
|
|
/* Wait for ADC starting up. */
|
|
int i;
|
|
for (i = 0; i < 800000; i++)
|
|
__asm__("nop");
|
|
|
|
}
|
|
|
|
static void usart_setup(void)
|
|
{
|
|
/* Enable clocks for GPIO port A (for GPIO_USART2_TX) and USART2. */
|
|
rcc_periph_clock_enable(RCC_USART2);
|
|
rcc_periph_clock_enable(RCC_GPIOA);
|
|
|
|
/* Setup GPIO pin GPIO_USART2_TX/GPIO9 on GPIO port A for transmit. */
|
|
gpio_mode_setup(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO2 | GPIO3);
|
|
gpio_set_af(GPIOA, GPIO_AF7, GPIO2| GPIO3);
|
|
|
|
/* Setup UART parameters. */
|
|
usart_set_baudrate(USART2, 115200);
|
|
usart_set_databits(USART2, 8);
|
|
usart_set_stopbits(USART2, USART_STOPBITS_1);
|
|
usart_set_mode(USART2, USART_MODE_TX_RX);
|
|
usart_set_parity(USART2, USART_PARITY_NONE);
|
|
usart_set_flow_control(USART2, USART_FLOWCONTROL_NONE);
|
|
|
|
/* Finally enable the USART. */
|
|
usart_enable(USART2);
|
|
}
|
|
|
|
static void gpio_setup(void)
|
|
{
|
|
rcc_periph_clock_enable(RCC_GPIOE);
|
|
gpio_mode_setup(GPIOE, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE,
|
|
GPIO8 | GPIO9 | GPIO10 | GPIO11 | GPIO12 | GPIO13 |
|
|
GPIO14 | GPIO15);
|
|
}
|
|
|
|
static void my_usart_print_int(uint32_t usart, int16_t value)
|
|
{
|
|
int8_t i;
|
|
int8_t nr_digits = 0;
|
|
char buffer[25];
|
|
|
|
if (value < 0) {
|
|
usart_send_blocking(usart, '-');
|
|
value = value * -1;
|
|
}
|
|
|
|
if (value == 0) {
|
|
usart_send_blocking(usart, '0');
|
|
}
|
|
|
|
while (value > 0) {
|
|
buffer[nr_digits++] = "0123456789"[value % 10];
|
|
value /= 10;
|
|
}
|
|
|
|
for (i = nr_digits-1; i >= 0; i--) {
|
|
usart_send_blocking(usart, buffer[i]);
|
|
}
|
|
|
|
usart_send_blocking(usart, '\r');
|
|
usart_send_blocking(usart, '\n');
|
|
}
|
|
|
|
static void clock_setup(void)
|
|
{
|
|
rcc_clock_setup_hsi(&rcc_hsi_8mhz[RCC_CLOCK_64MHZ]);
|
|
}
|
|
|
|
|
|
int main(void)
|
|
{
|
|
uint16_t temp;
|
|
|
|
clock_setup();
|
|
gpio_setup();
|
|
adc_setup();
|
|
usart_setup();
|
|
|
|
while (1) {
|
|
adc_start_conversion_regular(ADC1);
|
|
while (!(adc_eoc(ADC1)));
|
|
temp=adc_read_regular(ADC1);
|
|
gpio_port_write(GPIOE, temp << 4);
|
|
my_usart_print_int(USART2, temp);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|