Files
libopencm3-examples/examples/stm32/f4/stm32f4-discovery/usb_msc/msc.c
Piotr Esden-Tempski 976720c355 Updated libopencm3 to current master. Made all examples compile again.
Be specifically careful with the usb examples. There is likely some
breakage to be expected, not sure I updated all the drivers to the
correct types for the respective chips.
2015-12-15 00:56:25 +01:00

128 lines
3.4 KiB
C

/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2013 Weston Schmidt <weston_schmidt@alumni.purdue.edu>
* Copyright (C) 2013 Pavol Rusnak <stick@gk2.sk>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdlib.h>
#include <libopencm3/stm32/rcc.h>
#include <libopencm3/stm32/gpio.h>
#include <libopencm3/usb/usbd.h>
#include <libopencm3/usb/msc.h>
#include "ramdisk.h"
static const struct usb_device_descriptor dev_descr = {
.bLength = USB_DT_DEVICE_SIZE,
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = 0x0110,
.bDeviceClass = 0,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = 0x0483,
.idProduct = 0x5741,
.bcdDevice = 0x0200,
.iManufacturer = 1,
.iProduct = 2,
.iSerialNumber = 3,
.bNumConfigurations = 1,
};
static const struct usb_endpoint_descriptor msc_endp[] = {{
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x01,
.bmAttributes = USB_ENDPOINT_ATTR_BULK,
.wMaxPacketSize = 64,
.bInterval = 0,
}, {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x82,
.bmAttributes = USB_ENDPOINT_ATTR_BULK,
.wMaxPacketSize = 64,
.bInterval = 0,
}};
static const struct usb_interface_descriptor msc_iface[] = {{
.bLength = USB_DT_INTERFACE_SIZE,
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 2,
.bInterfaceClass = USB_CLASS_MSC,
.bInterfaceSubClass = USB_MSC_SUBCLASS_SCSI,
.bInterfaceProtocol = USB_MSC_PROTOCOL_BBB,
.iInterface = 0,
.endpoint = msc_endp,
.extra = NULL,
.extralen = 0
}};
static const struct usb_interface ifaces[] = {{
.num_altsetting = 1,
.altsetting = msc_iface,
}};
static const struct usb_config_descriptor config_descr = {
.bLength = USB_DT_CONFIGURATION_SIZE,
.bDescriptorType = USB_DT_CONFIGURATION,
.wTotalLength = 0,
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = 0x80,
.bMaxPower = 0x32,
.interface = ifaces,
};
static const char *usb_strings[] = {
"Black Sphere Technologies",
"MSC Demo",
"DEMO",
};
static usbd_device *msc_dev;
/* Buffer to be used for control requests. */
static uint8_t usbd_control_buffer[128];
int main(void)
{
rcc_clock_setup_hse_3v3(&rcc_hse_8mhz_3v3[RCC_CLOCK_3V3_120MHZ]);
rcc_periph_clock_enable(RCC_GPIOA);
rcc_periph_clock_enable(RCC_OTGFS);
gpio_mode_setup(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE,
GPIO9 | GPIO11 | GPIO12);
gpio_set_af(GPIOA, GPIO_AF10, GPIO9 | GPIO11 | GPIO12);
msc_dev = usbd_init(&otgfs_usb_driver, &dev_descr, &config_descr,
usb_strings, 3,
usbd_control_buffer, sizeof(usbd_control_buffer));
ramdisk_init();
usb_msc_init(msc_dev, 0x82, 64, 0x01, 64, "VendorID", "ProductID",
"0.00", ramdisk_blocks(), ramdisk_read, ramdisk_write);
for (;;) {
usbd_poll(msc_dev);
}
}