Files

T

Piotr Esden-Tempski 976720c355 Updated libopencm3 to current master. Made all examples compile again.

Be specifically careful with the usb examples. There is likely some
breakage to be expected, not sure I updated all the drivers to the
correct types for the respective chips.

2015-12-15 00:56:25 +01:00

echo.py

Add USB<->serial loopback example to WaveShare Open103R

2014-01-02 23:38:53 +01:00

Makefile

Add USB<->serial loopback example to WaveShare Open103R

2014-01-02 23:38:53 +01:00

README.md

[README] Coarse sweep to use markup in READMEs.

2015-01-19 19:20:12 -08:00

usbserial.c

Updated libopencm3 to current master. Made all examples compile again.

2015-12-15 00:56:25 +01:00

README.md

README

This example uses the USB port as a serial port and implements a loopback interface that immediately echos back whatever it receives. After flashing the evaluation board with the usbserial program and connecting it to a host computer with a USB cable, you can run the echo.py command as follows:

$ sudo ./echo.py hello world hello world $