15 lines
671 B
Plaintext
15 lines
671 B
Plaintext
------------------------------------------------------------------------------
|
|
README
|
|
------------------------------------------------------------------------------
|
|
|
|
This example demonstrates the ease of setting up the UART with libopencm3.
|
|
Basic UART echo is achieved by using blocking reads and writes. The UART is set
|
|
up as 921600-8N1.
|
|
PA0 is the Rx pin, and PA1 is the Tx pin (from the LM4F perspective). These
|
|
pins are connected to the CDCACM interface on the debug chip, so no hardware is
|
|
necessary to test this example. Just connect the debug USB cable and use a
|
|
terminal program to open the ACM port with 921600-8N1.
|
|
|
|
For example:
|
|
$ picocom /dev/ttyACM0 -b921600
|