159 lines
4.1 KiB
C
159 lines
4.1 KiB
C
/*
|
|
* This file is part of the libopencm3 project.
|
|
*
|
|
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
|
|
* Copyright (C) 2011 Stephen Caudle <scaudle@doceme.com>
|
|
* Modified by Fernando Cortes <fermando.corcam@gmail.com>
|
|
* modified by Guillermo Rivera <memogrg@gmail.com>
|
|
*
|
|
* This library is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU Lesser General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public License
|
|
* along with this library. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <libopencm3/stm32/rcc.h>
|
|
#include <libopencm3/stm32/adc.h>
|
|
#include <libopencm3/stm32/usart.h>
|
|
#include <libopencm3/stm32/gpio.h>
|
|
|
|
#define LBLUE GPIOE, GPIO8
|
|
#define LRED GPIOE, GPIO9
|
|
#define LORANGE GPIOE, GPIO10
|
|
#define LGREEN GPIOE, GPIO11
|
|
#define LBLUE2 GPIOE, GPIO12
|
|
#define LRED2 GPIOE, GPIO13
|
|
#define LORANGE2 GPIOE, GPIO14
|
|
#define LGREEN2 GPIOE, GPIO15
|
|
|
|
#define LD4 GPIOE, GPIO8
|
|
#define LD3 GPIOE, GPIO9
|
|
#define LD5 GPIOE, GPIO10
|
|
#define LD7 GPIOE, GPIO11
|
|
#define LD9 GPIOE, GPIO12
|
|
#define LD10 GPIOE, GPIO13
|
|
#define LD8 GPIOE, GPIO14
|
|
#define LD6 GPIOE, GPIO15
|
|
|
|
|
|
static void adc_setup(void)
|
|
{
|
|
//ADC
|
|
rcc_periph_clock_enable(RCC_ADC12);
|
|
rcc_periph_clock_enable(RCC_GPIOA);
|
|
//ADC
|
|
gpio_mode_setup(GPIOA, GPIO_MODE_ANALOG, GPIO_PUPD_NONE, GPIO0);
|
|
gpio_mode_setup(GPIOA, GPIO_MODE_ANALOG, GPIO_PUPD_NONE, GPIO1);
|
|
adc_power_off(ADC1);
|
|
adc_set_clk_prescale(ADC1, ADC_CCR_CKMODE_DIV2);
|
|
adc_set_single_conversion_mode(ADC1);
|
|
adc_disable_external_trigger_regular(ADC1);
|
|
adc_set_right_aligned(ADC1);
|
|
/* We want to read the temperature sensor, so we have to enable it. */
|
|
adc_enable_temperature_sensor();
|
|
adc_set_sample_time_on_all_channels(ADC1, ADC_SMPR_SMP_61DOT5CYC);
|
|
uint8_t channel_array[] = { 1 }; /* ADC1_IN1 (PA0) */
|
|
adc_set_regular_sequence(ADC1, 1, channel_array);
|
|
adc_set_resolution(ADC1, ADC_CFGR1_RES_12_BIT);
|
|
adc_power_on(ADC1);
|
|
|
|
/* Wait for ADC starting up. */
|
|
int i;
|
|
for (i = 0; i < 800000; i++)
|
|
__asm__("nop");
|
|
|
|
}
|
|
|
|
static void usart_setup(void)
|
|
{
|
|
/* Enable clocks for GPIO port A (for GPIO_USART2_TX) and USART2. */
|
|
rcc_periph_clock_enable(RCC_USART2);
|
|
rcc_periph_clock_enable(RCC_GPIOA);
|
|
|
|
/* Setup GPIO pin GPIO_USART2_TX/GPIO9 on GPIO port A for transmit. */
|
|
gpio_mode_setup(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO2 | GPIO3);
|
|
gpio_set_af(GPIOA, GPIO_AF7, GPIO2| GPIO3);
|
|
|
|
/* Setup UART parameters. */
|
|
usart_set_baudrate(USART2, 115200);
|
|
usart_set_databits(USART2, 8);
|
|
usart_set_stopbits(USART2, USART_STOPBITS_1);
|
|
usart_set_mode(USART2, USART_MODE_TX_RX);
|
|
usart_set_parity(USART2, USART_PARITY_NONE);
|
|
usart_set_flow_control(USART2, USART_FLOWCONTROL_NONE);
|
|
|
|
/* Finally enable the USART. */
|
|
usart_enable(USART2);
|
|
}
|
|
|
|
static void gpio_setup(void)
|
|
{
|
|
rcc_periph_clock_enable(RCC_GPIOE);
|
|
gpio_mode_setup(GPIOE, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE,
|
|
GPIO8 | GPIO9 | GPIO10 | GPIO11 | GPIO12 | GPIO13 |
|
|
GPIO14 | GPIO15);
|
|
}
|
|
|
|
static void my_usart_print_int(uint32_t usart, int16_t value)
|
|
{
|
|
int8_t i;
|
|
int8_t nr_digits = 0;
|
|
char buffer[25];
|
|
|
|
if (value < 0) {
|
|
usart_send_blocking(usart, '-');
|
|
value = value * -1;
|
|
}
|
|
|
|
if (value == 0) {
|
|
usart_send_blocking(usart, '0');
|
|
}
|
|
|
|
while (value > 0) {
|
|
buffer[nr_digits++] = "0123456789"[value % 10];
|
|
value /= 10;
|
|
}
|
|
|
|
for (i = nr_digits-1; i >= 0; i--) {
|
|
usart_send_blocking(usart, buffer[i]);
|
|
}
|
|
|
|
usart_send_blocking(usart, '\r');
|
|
usart_send_blocking(usart, '\n');
|
|
}
|
|
|
|
static void clock_setup(void)
|
|
{
|
|
rcc_clock_setup_hsi(&rcc_hsi_configs[RCC_CLOCK_HSI_64MHZ]);
|
|
}
|
|
|
|
|
|
int main(void)
|
|
{
|
|
uint16_t temp;
|
|
|
|
clock_setup();
|
|
gpio_setup();
|
|
adc_setup();
|
|
usart_setup();
|
|
|
|
while (1) {
|
|
adc_start_conversion_regular(ADC1);
|
|
while (!(adc_eoc(ADC1)));
|
|
temp=adc_read_regular(ADC1);
|
|
gpio_port_write(GPIOE, temp << 4);
|
|
my_usart_print_int(USART2, temp);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|