EMTime/libopencm3-examples
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

lm4f: Update makefile for "make flash" support

Browse Source 
When the makefile was originally written, openocd did not officially
support ICDI. Now that ICDI support is part of an official openocd release,
update the makefile to enable flashing with "make flash".
This commit is contained in:
Alexandru Gagniuc
2013-05-13 18:58:58 -05:00
parent ba4d0d23d7
commit b6cb78e9cc
1 changed files with 4 additions and 23 deletions
Download Patch File Download Diff File Expand all files Collapse all files

27
examples/lm4f/Makefile.include
View File

@@ -51,12 +51,9 @@ LDFLAGS += --static -Wl,--start-group -lc -lgcc -lnosys -Wl,--end-group
OBJS += $(BINARY).o OBJS += $(BINARY).o
# Support for ICDI is not in any openocd release as of yet # Support for ICDI is available starting with openocd 0.7.0
# A patch to add support for ICDI is under review
OOCD ?= openocd OOCD ?= openocd
OOCD_INTERFACE ?= ti-icdi OOCD_BOARD ?= ek-lm4f120xl
# No official board.cfg for the stellaris launchpad
OOCD_BOARD ?= stellaris_launchpad
# Be silent per default, but 'make V=1' will show all compiler calls. # Be silent per default, but 'make V=1' will show all compiler calls.
ifneq ($(V),1) ifneq ($(V),1)
@@ -112,30 +109,14 @@ clean:
$(Q)rm -f *.list $(Q)rm -f *.list
# FIXME: Replace STM32 stuff with proper Stellaris support. # FIXME: Replace STM32 stuff with proper Stellaris support.
ifeq ($(OOCD_SERIAL),)
%.flash: %.hex %.flash: %.hex
@printf " FLASH $<\n" @printf " FLASH $<\n"
@# IMPORTANT: Don't use "resume", only "reset" will work correctly! @# IMPORTANT: Don't use "resume", only "reset" will work correctly!
$(Q)$(OOCD) -f interface/$(OOCD_INTERFACE).cfg \ $(Q)$(OOCD) -f board/$(OOCD_BOARD).cfg \
-f board/$(OOCD_BOARD).cfg \
-c "init" -c "reset init" \ -c "init" -c "reset init" \
-c "stm32x mass_erase 0" \ -c "flash write_image erase $(*).hex 0" \
-c "flash write_image $(*).hex" \
-c "reset" \ -c "reset" \
-c "shutdown" $(NULL) -c "shutdown" $(NULL)
else
%.flash: %.hex
@printf " FLASH $<\n"
@# IMPORTANT: Don't use "resume", only "reset" will work correctly!
$(Q)$(OOCD) -f interface/$(OOCD_INTERFACE).cfg \
-f board/$(OOCD_BOARD).cfg \
-c "ft2232_serial $(OOCD_SERIAL)" \
-c "init" -c "reset init" \
-c "stm32x mass_erase 0" \
-c "flash write_image $(*).hex" \
-c "reset" \
-c "shutdown" $(NULL)
endif
.PHONY: images clean .PHONY: images clean