EMTime/libopencm3-examples
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Initial commit.

Browse Source
This commit is contained in:
Piotr Esden-Tempski
2013-04-19 17:19:32 -07:00
commit 9d5526f773
324 changed files with 22845 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

158
examples/stm32/f4/Makefile.include Normal file
View File

@@ -0,0 +1,158 @@
##
## This file is part of the libopencm3 project.
##
## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
## Copyright (C) 2010 Piotr Esden-Tempski <piotr@esden.net>
## Copyright (C) 2011 Fergus Noble <fergusnoble@gmail.com>
##
## This library is free software: you can redistribute it and/or modify
## it under the terms of the GNU Lesser General Public License as published by
## the Free Software Foundation, either version 3 of the License, or
## (at your option) any later version.
##
## This library is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU Lesser General Public License for more details.
##
## You should have received a copy of the GNU Lesser General Public License
## along with this library. If not, see <http://www.gnu.org/licenses/>.
##
PREFIX ?= arm-none-eabi
# PREFIX ?= arm-elf
CC = $(PREFIX)-gcc
LD = $(PREFIX)-gcc
OBJCOPY = $(PREFIX)-objcopy
OBJDUMP = $(PREFIX)-objdump
GDB = $(PREFIX)-gdb
FLASH = $(shell which st-flash)
TOOLCHAIN_DIR ?= ../../../../..
ifeq ($(wildcard ../../../../../lib/libopencm3_stm32f4.a),)
ifneq ($(strip $(shell which $(CC))),)
TOOLCHAIN_DIR := $(shell dirname `which $(CC)`)/../$(PREFIX)
endif
else
ifeq ($(V),1)
$(info We seem to be building the example in the source directory. Using local library!)
endif
endif
CFLAGS += -Os -g \
-Wall -Wextra -Wimplicit-function-declaration \
-Wredundant-decls -Wmissing-prototypes -Wstrict-prototypes \
-Wundef -Wshadow \
-I$(TOOLCHAIN_DIR)/include \
-fno-common -mcpu=cortex-m4 -mthumb \
-mfloat-abi=hard -mfpu=fpv4-sp-d16 -MD -DSTM32F4
LDSCRIPT ?= $(BINARY).ld
LDFLAGS += --static -lc -lnosys -L$(TOOLCHAIN_DIR)/lib \
-L$(TOOLCHAIN_DIR)/lib/stm32/f4 \
-T$(LDSCRIPT) -nostartfiles -Wl,--gc-sections \
-mthumb -mcpu=cortex-m4 -mthumb -mfloat-abi=hard -mfpu=fpv4-sp-d16
OBJS += $(BINARY).o
OOCD ?= openocd
OOCD_INTERFACE ?= flossjtag
OOCD_BOARD ?= olimex_stm32_h103
# Black magic probe specific variables
# Set the BMP_PORT to a serial port and then BMP is used for flashing
BMP_PORT ?=
# Be silent per default, but 'make V=1' will show all compiler calls.
ifneq ($(V),1)
Q := @
NULL := 2>/dev/null
else
LDFLAGS += -Wl,--print-gc-sections
endif
.SUFFIXES: .elf .bin .hex .srec .list .images
.SECONDEXPANSION:
.SECONDARY:
all: images
images: $(BINARY).images
flash: $(BINARY).flash
%.images: %.bin %.hex %.srec %.list
@#echo "*** $* images generated ***"
%.bin: %.elf
@#printf " OBJCOPY $(*).bin\n"
$(Q)$(OBJCOPY) -Obinary $(*).elf $(*).bin
%.hex: %.elf
@#printf " OBJCOPY $(*).hex\n"
$(Q)$(OBJCOPY) -Oihex $(*).elf $(*).hex
%.srec: %.elf
@#printf " OBJCOPY $(*).srec\n"
$(Q)$(OBJCOPY) -Osrec $(*).elf $(*).srec
%.list: %.elf
@#printf " OBJDUMP $(*).list\n"
$(Q)$(OBJDUMP) -S $(*).elf > $(*).list
%.elf: $(OBJS) $(LDSCRIPT) $(TOOLCHAIN_DIR)/lib/libopencm3_stm32f4.a
@#printf " LD $(subst $(shell pwd)/,,$(@))\n"
$(Q)$(LD) -o $(*).elf $(OBJS) -lopencm3_stm32f4 $(LDFLAGS)
%.o: %.c Makefile
@#printf " CC $(subst $(shell pwd)/,,$(@))\n"
$(Q)$(CC) $(CFLAGS) -o $@ -c $<
clean:
$(Q)rm -f *.o
$(Q)rm -f *.d
$(Q)rm -f *.elf
$(Q)rm -f *.bin
$(Q)rm -f *.hex
$(Q)rm -f *.srec
$(Q)rm -f *.list
%.stlink-flash: %.bin
@printf " FLASH $<\n"
$(Q)$(FLASH) write $(*).bin 0x8000000
ifeq ($(BMP_PORT),)
ifeq ($(OOCD_SERIAL),)
%.flash: %.hex
@printf " FLASH $<\n"
@# IMPORTANT: Don't use "resume", only "reset" will work correctly!
$(Q)$(OOCD) -f interface/$(OOCD_INTERFACE).cfg \
-f board/$(OOCD_BOARD).cfg \
-c "init" -c "reset init" \
-c "stm32x mass_erase 0" \
-c "flash write_image $(*).hex" \
-c "reset" \
-c "shutdown" $(NULL)
else
%.flash: %.hex
@printf " FLASH $<\n"
@# IMPORTANT: Don't use "resume", only "reset" will work correctly!
$(Q)$(OOCD) -f interface/$(OOCD_INTERFACE).cfg \
-f board/$(OOCD_BOARD).cfg \
-c "ft2232_serial $(OOCD_SERIAL)" \
-c "init" -c "reset init" \
-c "stm32x mass_erase 0" \
-c "flash write_image $(*).hex" \
-c "reset" \
-c "shutdown" $(NULL)
endif
else
%.flash: %.elf
@echo " GDB $(*).elf (flash)"
$(Q)$(GDB) --batch \
-ex 'target extended-remote $(BMP_PORT)' \
-x $(TOOLCHAIN_DIR)/scripts/black_magic_probe_flash.scr \
$(*).elf
endif
.PHONY: images clean
-include $(OBJS:.o=.d)

25
examples/stm32/f4/stm32f4-discovery/button/Makefile Normal file
View File

@@ -0,0 +1,25 @@
##
## This file is part of the libopencm3 project.
##
## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
##
## This library is free software: you can redistribute it and/or modify
## it under the terms of the GNU Lesser General Public License as published by
## the Free Software Foundation, either version 3 of the License, or
## (at your option) any later version.
##
## This library is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU Lesser General Public License for more details.
##
## You should have received a copy of the GNU Lesser General Public License
## along with this library. If not, see <http://www.gnu.org/licenses/>.
##
BINARY = button
LDSCRIPT = ../stm32f4-discovery.ld
include ../../Makefile.include

8
examples/stm32/f4/stm32f4-discovery/button/README Normal file
View File

@@ -0,0 +1,8 @@
------------------------------------------------------------------------------
README
------------------------------------------------------------------------------
This example blinks the green LED on the ST STM32F4DISCOVERY eval board.
When you press the 'USER' button, the blinking is slower.

76
examples/stm32/f4/stm32f4-discovery/button/button.c Normal file
View File

@@ -0,0 +1,76 @@
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>,
* Copyright (C) 2010 Piotr Esden-Tempski <piotr@esden.net>
* Copyright (C) 2011 Stephen Caudle <scaudle@doceme.com>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
#include <libopencm3/stm32/f4/rcc.h>
#include <libopencm3/stm32/f4/gpio.h>
u16 exti_line_state;
/* Set STM32 to 168 MHz. */
static void clock_setup(void)
{
rcc_clock_setup_hse_3v3(&hse_8mhz_3v3[CLOCK_3V3_168MHZ]);
}
static void gpio_setup(void)
{
/* Enable GPIOD clock. */
rcc_peripheral_enable_clock(&RCC_AHB1ENR, RCC_AHB1ENR_IOPDEN);
/* Set GPIO12 (in GPIO port D) to 'output push-pull'. */
gpio_mode_setup(GPIOD, GPIO_MODE_OUTPUT,
GPIO_PUPD_NONE, GPIO12 | GPIO13 | GPIO14 | GPIO15);
}
static void button_setup(void)
{
/* Enable GPIOA clock. */
rcc_peripheral_enable_clock(&RCC_AHB1ENR, RCC_AHB1ENR_IOPAEN);
/* Set GPIO0 (in GPIO port A) to 'input open-drain'. */
gpio_mode_setup(GPIOA, GPIO_MODE_INPUT, GPIO_PUPD_NONE, GPIO0);
}
int main(void)
{
int i;
clock_setup();
button_setup();
gpio_setup();
/* Blink the LED (PD12) on the board. */
while (1) {
gpio_toggle(GPIOD, GPIO12);
/* Upon button press, blink more slowly. */
exti_line_state = GPIOA_IDR;
if ((exti_line_state & (1 << 0)) != 0) {
for (i = 0; i < 3000000; i++) /* Wait a bit. */
__asm__("nop");
}
for (i = 0; i < 3000000; i++) /* Wait a bit. */
__asm__("nop");
}
return 0;
}

25
examples/stm32/f4/stm32f4-discovery/fancyblink/Makefile Normal file
View File

@@ -0,0 +1,25 @@
##
## This file is part of the libopencm3 project.
##
## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
##
## This library is free software: you can redistribute it and/or modify
## it under the terms of the GNU Lesser General Public License as published by
## the Free Software Foundation, either version 3 of the License, or
## (at your option) any later version.
##
## This library is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU Lesser General Public License for more details.
##
## You should have received a copy of the GNU Lesser General Public License
## along with this library. If not, see <http://www.gnu.org/licenses/>.
##
BINARY = fancyblink
LDSCRIPT = ../stm32f4-discovery.ld
include ../../Makefile.include

9
examples/stm32/f4/stm32f4-discovery/fancyblink/README Normal file
View File

@@ -0,0 +1,9 @@
------------------------------------------------------------------------------
README
------------------------------------------------------------------------------
This is the smallest-possible example program using libopencm3.
It's intended for the ST STM32F4DISCOVERY eval board. It should blink
the LEDs on the board.

60
examples/stm32/f4/stm32f4-discovery/fancyblink/fancyblink.c Normal file
View File

@@ -0,0 +1,60 @@
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
* Copyright (C) 2011 Damjan Marion <damjan.marion@gmail.com>
* Copyright (C) 2011 Mark Panajotovic <marko@electrontube.org>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
#include <libopencm3/stm32/f4/rcc.h>
#include <libopencm3/stm32/f4/gpio.h>
/* Set STM32 to 168 MHz. */
static void clock_setup(void)
{
rcc_clock_setup_hse_3v3(&hse_8mhz_3v3[CLOCK_3V3_168MHZ]);
/* Enable GPIOD clock. */
rcc_peripheral_enable_clock(&RCC_AHB1ENR, RCC_AHB1ENR_IOPDEN);
}
static void gpio_setup(void)
{
/* Set GPIO12-15 (in GPIO port D) to 'output push-pull'. */
gpio_mode_setup(GPIOD, GPIO_MODE_OUTPUT,
GPIO_PUPD_NONE, GPIO12 | GPIO13 | GPIO14 | GPIO15);
}
int main(void)
{
int i;
clock_setup();
gpio_setup();
/* Set two LEDs for wigwag effect when toggling. */
gpio_set(GPIOD, GPIO12 | GPIO14);
/* Blink the LEDs (PD12, PD13, PD14 and PD15) on the board. */
while (1) {
/* Toggle LEDs. */
gpio_toggle(GPIOD, GPIO12 | GPIO13 | GPIO14 | GPIO15);
for (i = 0; i < 6000000; i++) /* Wait a bit. */
__asm__("nop");
}
return 0;
}

25
examples/stm32/f4/stm32f4-discovery/mandelbrot/Makefile Normal file
View File

@@ -0,0 +1,25 @@
##
## This file is part of the libopencm3 project.
##
## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
##
## This library is free software: you can redistribute it and/or modify
## it under the terms of the GNU Lesser General Public License as published by
## the Free Software Foundation, either version 3 of the License, or
## (at your option) any later version.
##
## This library is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU Lesser General Public License for more details.
##
## You should have received a copy of the GNU Lesser General Public License
## along with this library. If not, see <http://www.gnu.org/licenses/>.
##
BINARY = mandel
LDSCRIPT = ../stm32f4-discovery.ld
include ../../Makefile.include

12
examples/stm32/f4/stm32f4-discovery/mandelbrot/README Normal file
View File

@@ -0,0 +1,12 @@
------------------------------------------------------------------------------
README
------------------------------------------------------------------------------
This example program demonstrates the floating point coprocessor usage on
the ST STM32F4DISCOVERY eval board.
A mandelbrot fractal is calculated and sent as "ascii-art" image through
the USART2.
The terminal settings for the receiving device/PC are 38400 8n1.

127
examples/stm32/f4/stm32f4-discovery/mandelbrot/mandel.c Normal file
View File

@@ -0,0 +1,127 @@
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
* Copyright (C) 2011 Stephen Caudle <scaudle@doceme.com>
* Copyright (C) 2012 Daniel Serpell <daniel.serpell@gmail.com>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
#include <libopencm3/stm32/f4/rcc.h>
#include <libopencm3/stm32/f4/gpio.h>
#include <libopencm3/stm32/usart.h>
static void clock_setup(void)
{
/* Enable high-speed clock at 120MHz */
rcc_clock_setup_hse_3v3(&hse_8mhz_3v3[CLOCK_3V3_120MHZ]);
/* Enable GPIOD clock for LED & USARTs. */
rcc_peripheral_enable_clock(&RCC_AHB1ENR, RCC_AHB1ENR_IOPDEN);
rcc_peripheral_enable_clock(&RCC_AHB1ENR, RCC_AHB1ENR_IOPAEN);
/* Enable clocks for USART2. */
rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_USART2EN);
}
static void usart_setup(void)
{
/* Setup USART2 parameters. */
usart_set_baudrate(USART2, 38400);
usart_set_databits(USART2, 8);
usart_set_stopbits(USART2, USART_STOPBITS_1);
usart_set_mode(USART2, USART_MODE_TX);
usart_set_parity(USART2, USART_PARITY_NONE);
usart_set_flow_control(USART2, USART_FLOWCONTROL_NONE);
/* Finally enable the USART. */
usart_enable(USART2);
}
static void gpio_setup(void)
{
/* Setup GPIO pin GPIO12 on GPIO port D for LED. */
gpio_mode_setup(GPIOD, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, GPIO12);
/* Setup GPIO pins for USART2 transmit. */
gpio_mode_setup(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO2);
/* Setup USART2 TX pin as alternate function. */
gpio_set_af(GPIOA, GPIO_AF7, GPIO2);
}
/* Maximum number of iterations for the escape-time calculation */
#define maxIter 32
/* This array converts the iteration count to a character representation. */
static char color[maxIter+1] = " .:++xxXXX%%%%%%################";
/* Main mandelbrot calculation */
static int iterate(float px, float py)
{
int it=0;
float x=0,y=0;
while(it<maxIter)
{
float nx = x*x;
float ny = y*y;
if( (nx + ny) > 4 )
return it;
// Zn+1 = Zn^2 + P
y = 2*x*y + py;
x = nx - ny + px;
it++;
}
return 0;
}
static void mandel(float cX, float cY, float scale)
{
int x,y;
for(x=-60;x<60;x++)
{
for(y=-50;y<50;y++)
{
int i = iterate(cX+x*scale, cY+y*scale);
usart_send_blocking(USART2, color[i]);
}
usart_send_blocking(USART2, '\r');
usart_send_blocking(USART2, '\n');
}
}
int main(void)
{
float scale = 0.25f, centerX = -0.5f, centerY = 0.0f;
clock_setup();
gpio_setup();
usart_setup();
while (1) {
/* Blink the LED (PD12) on the board with each fractal drawn. */
gpio_toggle(GPIOD, GPIO12); /* LED on/off */
mandel(centerX,centerY,scale); /* draw mandelbrot */
/* Change scale and center */
centerX += 0.175f * scale;
centerY += 0.522f * scale;
scale *= 0.875f;
usart_send_blocking(USART2, '\r');
usart_send_blocking(USART2, '\n');
}
return 0;
}

25
examples/stm32/f4/stm32f4-discovery/miniblink/Makefile Normal file
View File

@@ -0,0 +1,25 @@
##
## This file is part of the libopencm3 project.
##
## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
##
## This library is free software: you can redistribute it and/or modify
## it under the terms of the GNU Lesser General Public License as published by
## the Free Software Foundation, either version 3 of the License, or
## (at your option) any later version.
##
## This library is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU Lesser General Public License for more details.
##
## You should have received a copy of the GNU Lesser General Public License
## along with this library. If not, see <http://www.gnu.org/licenses/>.
##
BINARY = miniblink
LDSCRIPT = ../stm32f4-discovery.ld
include ../../Makefile.include

9
examples/stm32/f4/stm32f4-discovery/miniblink/README Normal file
View File

@@ -0,0 +1,9 @@
------------------------------------------------------------------------------
README
------------------------------------------------------------------------------
This is the smallest-possible example program using libopencm3.
It's intended for the ST STM32F4DISCOVERY eval board. It should blink
the blue LED on the board.

71
examples/stm32/f4/stm32f4-discovery/miniblink/miniblink.c Normal file
View File

@@ -0,0 +1,71 @@
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
* Copyright (C) 2011 Stephen Caudle <scaudle@doceme.com>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
#include <libopencm3/stm32/f4/rcc.h>
#include <libopencm3/stm32/f4/gpio.h>
static void gpio_setup(void)
{
/* Enable GPIOD clock. */
/* Manually: */
// RCC_AHB1ENR |= RCC_AHB1ENR_IOPDEN;
/* Using API functions: */
rcc_peripheral_enable_clock(&RCC_AHB1ENR, RCC_AHB1ENR_IOPDEN);
/* Set GPIO12 (in GPIO port D) to 'output push-pull'. */
/* Manually: */
// GPIOD_CRH = (GPIO_CNF_OUTPUT_PUSHPULL << (((8 - 8) * 4) + 2));
// GPIOD_CRH |= (GPIO_MODE_OUTPUT_2_MHZ << ((8 - 8) * 4));
/* Using API functions: */
gpio_mode_setup(GPIOD, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, GPIO12);
}
int main(void)
{
int i;
gpio_setup();
/* Blink the LED (PC8) on the board. */
while (1) {
/* Manually: */
// GPIOD_BSRR = GPIO12; /* LED off */
// for (i = 0; i < 1000000; i++) /* Wait a bit. */
// __asm__("nop");
// GPIOD_BRR = GPIO12; /* LED on */
// for (i = 0; i < 1000000; i++) /* Wait a bit. */
// __asm__("nop");
/* Using API functions gpio_set()/gpio_clear(): */
// gpio_set(GPIOD, GPIO12); /* LED off */
// for (i = 0; i < 1000000; i++) /* Wait a bit. */
// __asm__("nop");
// gpio_clear(GPIOD, GPIO12); /* LED on */
// for (i = 0; i < 1000000; i++) /* Wait a bit. */
// __asm__("nop");
/* Using API function gpio_toggle(): */
gpio_toggle(GPIOD, GPIO12); /* LED on/off */
for (i = 0; i < 1000000; i++) /* Wait a bit. */
__asm__("nop");
}
return 0;
}

25
examples/stm32/f4/stm32f4-discovery/random/Makefile Normal file
View File

@@ -0,0 +1,25 @@
##
## This file is part of the libopencm3 project.
##
## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
##
## This library is free software: you can redistribute it and/or modify
## it under the terms of the GNU Lesser General Public License as published by
## the Free Software Foundation, either version 3 of the License, or
## (at your option) any later version.
##
## This library is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU Lesser General Public License for more details.
##
## You should have received a copy of the GNU Lesser General Public License
## along with this library. If not, see <http://www.gnu.org/licenses/>.
##
BINARY = random
LDSCRIPT = ../stm32f4-discovery.ld
include ../../Makefile.include

5
examples/stm32/f4/stm32f4-discovery/random/README Normal file
View File

@@ -0,0 +1,5 @@
------------------------------------------------------------------------------
README
------------------------------------------------------------------------------
This example randomly blinks the green LED on the ST STM32F4DISCOVERY eval board.

88
examples/stm32/f4/stm32f4-discovery/random/random.c Normal file
View File

@@ -0,0 +1,88 @@
/*
* This file is part of the libopencm3 project.
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
#include <libopencm3/cm3/common.h>
#include <libopencm3/stm32/f4/rcc.h>
#include <libopencm3/stm32/f4/gpio.h>
#include <libopencm3/stm32/f4/rng.h>
static void rcc_setup(void)
{
rcc_clock_setup_hse_3v3(&hse_8mhz_3v3[CLOCK_3V3_120MHZ]);
/* Enable GPIOD clock for onboard leds. */
rcc_peripheral_enable_clock(&RCC_AHB1ENR, RCC_AHB1ENR_IOPDEN);
/* Enable rng clock */
rcc_peripheral_enable_clock(&RCC_AHB2ENR, RCC_AHB2ENR_RNGEN);
}
static void rng_setup(void)
{
/* Enable interupt */
/* Set the IE bit in the RNG_CR register. */
RNG_CR |= RNG_CR_IE;
/* Enable the random number generation by setting the RNGEN bit in the RNG_CR
register. This activates the analog part, the RNG_LFSR and the error detector.
*/
RNG_CR |= RNG_CR_RNGEN;
}
static void gpio_setup(void)
{
/* Setup onboard led */
gpio_mode_setup(GPIOD, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, GPIO12 | GPIO13);
}
/* Tried to folow the guidelines in the stm32f4 user manual.*/
static u32 random_int(void)
{
static u32 last_value=0;
static u32 new_value=0;
u32 error_bits = 0;
error_bits = RNG_SR_SEIS | RNG_SR_CEIS;
while (new_value==last_value) {
/* Check for error flags and if data is ready. */
if ( ((RNG_SR & error_bits) == 0) && ( (RNG_SR & RNG_SR_DRDY) == 1 ) )
new_value=RNG_DR;
}
last_value=new_value;
return new_value;
}
int main(void)
{
int i,j;
rcc_setup();
gpio_setup();
rng_setup();
while(1){
u32 rnd;
rnd = random_int();
for(i=0;i!=32;++i){
if ( (rnd & (1 << i))!=0 )
gpio_set(GPIOD, GPIO12);
else
gpio_clear(GPIOD, GPIO12);
/* Delay */
for(j=0;j!=5000000;++j)
__asm__("nop");
}
}
}

32
examples/stm32/f4/stm32f4-discovery/stm32f4-discovery.ld Normal file
View File

@@ -0,0 +1,32 @@
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
* Copyright (C) 2011 Stephen Caudle <scaudle@doceme.com>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
/* Linker script for ST STM32F4DISCOVERY (STM32F407VG, 1024K flash, 128K RAM). */
/* Define memory regions. */
MEMORY
{
rom (rx) : ORIGIN = 0x08000000, LENGTH = 1024K
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 128K
}
/* Include the common ld script. */
INCLUDE libopencm3_stm32f4.ld

25
examples/stm32/f4/stm32f4-discovery/usart/Makefile Normal file
View File

@@ -0,0 +1,25 @@
##
## This file is part of the libopencm3 project.
##
## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
##
## This library is free software: you can redistribute it and/or modify
## it under the terms of the GNU Lesser General Public License as published by
## the Free Software Foundation, either version 3 of the License, or
## (at your option) any later version.
##
## This library is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU Lesser General Public License for more details.
##
## You should have received a copy of the GNU Lesser General Public License
## along with this library. If not, see <http://www.gnu.org/licenses/>.
##
BINARY = usart
LDSCRIPT = ../stm32f4-discovery.ld
include ../../Makefile.include

11
examples/stm32/f4/stm32f4-discovery/usart/README Normal file
View File

@@ -0,0 +1,11 @@
------------------------------------------------------------------------------
README
------------------------------------------------------------------------------
This example program sends some characters on USART2 on the
ST STM32F4DISCOVERY eval board.
The terminal settings for the receiving device/PC are 38400 8n1.
The sending is done in a blocking way in the code.

83
examples/stm32/f4/stm32f4-discovery/usart/usart.c Normal file
View File

@@ -0,0 +1,83 @@
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
* Copyright (C) 2011 Stephen Caudle <scaudle@doceme.com>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
#include <libopencm3/stm32/f4/rcc.h>
#include <libopencm3/stm32/f4/gpio.h>
#include <libopencm3/stm32/usart.h>
static void clock_setup(void)
{
/* Enable GPIOD clock for LED & USARTs. */
rcc_peripheral_enable_clock(&RCC_AHB1ENR, RCC_AHB1ENR_IOPDEN);
rcc_peripheral_enable_clock(&RCC_AHB1ENR, RCC_AHB1ENR_IOPAEN);
/* Enable clocks for USART2. */
rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_USART2EN);
}
static void usart_setup(void)
{
/* Setup USART2 parameters. */
usart_set_baudrate(USART2, 38400);
usart_set_databits(USART2, 8);
usart_set_stopbits(USART2, USART_STOPBITS_1);
usart_set_mode(USART2, USART_MODE_TX);
usart_set_parity(USART2, USART_PARITY_NONE);
usart_set_flow_control(USART2, USART_FLOWCONTROL_NONE);
/* Finally enable the USART. */
usart_enable(USART2);
}
static void gpio_setup(void)
{
/* Setup GPIO pin GPIO12 on GPIO port D for LED. */
gpio_mode_setup(GPIOD, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, GPIO12);
/* Setup GPIO pins for USART2 transmit. */
gpio_mode_setup(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO2);
/* Setup USART2 TX pin as alternate function. */
gpio_set_af(GPIOA, GPIO_AF7, GPIO2);
}
int main(void)
{
int i, j = 0, c = 0;
clock_setup();
gpio_setup();
usart_setup();
/* Blink the LED (PD12) on the board with every transmitted byte. */
while (1) {
gpio_toggle(GPIOD, GPIO12); /* LED on/off */
usart_send_blocking(USART2, c + '0'); /* USART2: Send byte. */
c = (c == 9) ? 0 : c + 1; /* Increment c. */
if ((j++ % 80) == 0) { /* Newline after line full. */
usart_send_blocking(USART2, '\r');
usart_send_blocking(USART2, '\n');
}
for (i = 0; i < 3000000; i++) /* Wait a bit. */
__asm__("NOP");
}
return 0;
}

25
examples/stm32/f4/stm32f4-discovery/usart_irq/Makefile Normal file
View File

@@ -0,0 +1,25 @@
##
## This file is part of the libopencm3 project.
##
## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
##
## This library is free software: you can redistribute it and/or modify
## it under the terms of the GNU Lesser General Public License as published by
## the Free Software Foundation, either version 3 of the License, or
## (at your option) any later version.
##
## This library is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU Lesser General Public License for more details.
##
## You should have received a copy of the GNU Lesser General Public License
## along with this library. If not, see <http://www.gnu.org/licenses/>.
##
BINARY = usart_irq
LDSCRIPT = ../stm32f4-discovery.ld
include ../../Makefile.include

14
examples/stm32/f4/stm32f4-discovery/usart_irq/README Normal file
View File

@@ -0,0 +1,14 @@
------------------------------------------------------------------------------
README
------------------------------------------------------------------------------
This example program echoes data sent in on USART2 on the
ST STM32F4DISCOVERY eval board. Uses interrupts for that purpose.
Connect your TTL RX device line to PA2 on the discovery board.
Connect your TTL TX device line to PA3 on the discovery board.
The terminal settings for the receiving device/PC are 38400 8n1.
The sending is done in a blocking way in the code.

115
examples/stm32/f4/stm32f4-discovery/usart_irq/usart_irq.c Normal file
View File

@@ -0,0 +1,115 @@
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
* Copyright (C) 2011 Stephen Caudle <scaudle@doceme.com>
* Copyright (C) 2013 Piotr Esden-Tempski <piotr@esden.net>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
#include <libopencm3/stm32/f4/rcc.h>
#include <libopencm3/stm32/f4/gpio.h>
#include <libopencm3/stm32/usart.h>
#include <libopencm3/cm3/nvic.h>
static void clock_setup(void)
{
/* Enable GPIOD clock for LED & USARTs. */
rcc_peripheral_enable_clock(&RCC_AHB1ENR, RCC_AHB1ENR_IOPDEN);
rcc_peripheral_enable_clock(&RCC_AHB1ENR, RCC_AHB1ENR_IOPAEN);
/* Enable clocks for USART2. */
rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_USART2EN);
}
static void usart_setup(void)
{
/* Enable the USART2 interrupt. */
nvic_enable_irq(NVIC_USART2_IRQ);
/* Setup GPIO pins for USART2 transmit. */
gpio_mode_setup(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO2);
/* Setup GPIO pins for USART2 receive. */
gpio_mode_setup(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO3);
gpio_set_output_options(GPIOA, GPIO_OTYPE_OD, GPIO_OSPEED_25MHZ, GPIO3);
/* Setup USART2 TX and RX pin as alternate function. */
gpio_set_af(GPIOA, GPIO_AF7, GPIO2);
gpio_set_af(GPIOA, GPIO_AF7, GPIO3);
/* Setup USART2 parameters. */
usart_set_baudrate(USART2, 38400);
usart_set_databits(USART2, 8);
usart_set_stopbits(USART2, USART_STOPBITS_1);
usart_set_mode(USART2, USART_MODE_TX_RX);
usart_set_parity(USART2, USART_PARITY_NONE);
usart_set_flow_control(USART2, USART_FLOWCONTROL_NONE);
/* Enable USART2 Receive interrupt. */
usart_enable_rx_interrupt(USART2);
/* Finally enable the USART. */
usart_enable(USART2);
}
static void gpio_setup(void)
{
/* Setup GPIO pin GPIO12 on GPIO port D for LED. */
gpio_mode_setup(GPIOD, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, GPIO12);
}
int main(void)
{
clock_setup();
gpio_setup();
usart_setup();
while (1) {
__asm__("NOP");
}
return 0;
}
void usart2_isr(void)
{
static u8 data = 'A';
/* Check if we were called because of RXNE. */
if (((USART_CR1(USART2) & USART_CR1_RXNEIE) != 0) &&
((USART_SR(USART2) & USART_SR_RXNE) != 0)) {
/* Indicate that we got data. */
gpio_toggle(GPIOD, GPIO12);
/* Retrieve the data from the peripheral. */
data = usart_recv(USART2);
/* Enable transmit interrupt so it sends back the data. */
usart_enable_tx_interrupt(USART2);
}
/* Check if we were called because of TXE. */
if (((USART_CR1(USART2) & USART_CR1_TXEIE) != 0) &&
((USART_SR(USART2) & USART_SR_TXE) != 0)) {
/* Put data into the transmit register. */
usart_send(USART2, data);
/* Disable the TXE interrupt as we don't need it anymore. */
usart_disable_tx_interrupt(USART2);
}
}

93
examples/stm32/f4/stm32f4-discovery/usart_irq/usart_irq.c~ Normal file
View File

@@ -0,0 +1,93 @@
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
* Copyright (C) 2011 Stephen Caudle <scaudle@doceme.com>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
#include <libopencm3/stm32/f4/rcc.h>
#include <libopencm3/stm32/f4/gpio.h>
#include <libopencm3/stm32/usart.h>
void clock_setup(void)
{
/* Enable GPIOD clock for LED & USARTs. */
rcc_peripheral_enable_clock(&RCC_AHB1ENR, RCC_AHB1ENR_IOPDEN);
rcc_peripheral_enable_clock(&RCC_AHB1ENR, RCC_AHB1ENR_IOPAEN);
/* Enable clocks for USART2. */
rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_USART2EN);
}
void usart_setup(void)
{
/* Setup USART2 parameters. */
usart_set_baudrate(USART2, 38400);
usart_set_databits(USART2, 8);
usart_set_stopbits(USART2, USART_STOPBITS_1);
usart_set_mode(USART2, USART_MODE_TX);
usart_set_parity(USART2, USART_PARITY_NONE);
usart_set_flow_control(USART2, USART_FLOWCONTROL_NONE);
/* Finally enable the USART. */
usart_enable(USART2);
}
void gpio_setup(void)
{
/* Setup GPIO pin GPIO12 on GPIO port D for LED. */
gpio_mode_setup(GPIOD, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, GPIO12);
/* Setup GPIO pins for USART2 transmit. */
gpio_mode_setup(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO2);
/* Setup GPIO pins for USART2 receive. */
gpio_mode_setup(GPIOA, GPIO_MODE_INPUT, GPIO_OTYPE_OD, GPIO3);
/* Setup USART2 TX and RX pin as alternate function. */
gpio_set_af(GPIOA, GPIO_AF7, GPIO2);
gpio_set_af(GPIOA, GPIO_AF7, GPIO3);
}
int main(void)
{
int i, j = 0, c = 0;
u16 in_ch = 0;
clock_setup();
gpio_setup();
usart_setup();
/* Blink the LED (PD12) on the board with every transmitted byte. */
while (1) {
gpio_toggle(GPIOD, GPIO12); /* LED on/off */
usart_send_blocking(USART2, c + '0'); /* USART2: Send byte. */
c = (c == 9) ? 0 : c + 1; /* Increment c. */
if ((j++ % 80) == 0) { /* Newline after line full. */
usart_send_blocking(USART2, '\r');
usart_send_blocking(USART2, '\n');
}
if ((USART_SR(usart) & USART_SR_RXNE) != 0) {
in_ch = usart_recv(USART2);
usart_send_blocking(USART2, in_ch);
}
for (i = 0; i < 3000000; i++) /* Wait a bit. */
__asm__("NOP");
}
return 0;
}

25
examples/stm32/f4/stm32f4-discovery/usb_cdcacm/Makefile Normal file
View File

@@ -0,0 +1,25 @@
##
## This file is part of the libopencm3 project.
##
## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
##
## This library is free software: you can redistribute it and/or modify
## it under the terms of the GNU Lesser General Public License as published by
## the Free Software Foundation, either version 3 of the License, or
## (at your option) any later version.
##
## This library is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU Lesser General Public License for more details.
##
## You should have received a copy of the GNU Lesser General Public License
## along with this library. If not, see <http://www.gnu.org/licenses/>.
##
BINARY = cdcacm
LDSCRIPT = ../stm32f4-discovery.ld
include ../../Makefile.include

7
examples/stm32/f4/stm32f4-discovery/usb_cdcacm/README Normal file
View File

@@ -0,0 +1,7 @@
------------------------------------------------------------------------------
README
------------------------------------------------------------------------------
This example implements a USB CDC-ACM device (aka Virtual Serial Port)
to demonstrate the use of the USB device stack.

240
examples/stm32/f4/stm32f4-discovery/usb_cdcacm/cdcacm.c Normal file
View File

@@ -0,0 +1,240 @@
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2010 Gareth McMullin <gareth@blacksphere.co.nz>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdlib.h>
#include <libopencm3/stm32/f4/rcc.h>
#include <libopencm3/stm32/f4/gpio.h>
#include <libopencm3/usb/usbd.h>
#include <libopencm3/usb/cdc.h>
#include <libopencm3/cm3/scb.h>
static const struct usb_device_descriptor dev = {
.bLength = USB_DT_DEVICE_SIZE,
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = 0x0200,
.bDeviceClass = USB_CLASS_CDC,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = 0x0483,
.idProduct = 0x5740,
.bcdDevice = 0x0200,
.iManufacturer = 1,
.iProduct = 2,
.iSerialNumber = 3,
.bNumConfigurations = 1,
};
/*
* This notification endpoint isn't implemented. According to CDC spec it's
* optional, but its absence causes a NULL pointer dereference in the
* Linux cdc_acm driver.
*/
static const struct usb_endpoint_descriptor comm_endp[] = {{
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x83,
.bmAttributes = USB_ENDPOINT_ATTR_INTERRUPT,
.wMaxPacketSize = 16,
.bInterval = 255,
}};
static const struct usb_endpoint_descriptor data_endp[] = {{
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x01,
.bmAttributes = USB_ENDPOINT_ATTR_BULK,
.wMaxPacketSize = 64,
.bInterval = 1,
}, {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x82,
.bmAttributes = USB_ENDPOINT_ATTR_BULK,
.wMaxPacketSize = 64,
.bInterval = 1,
}};
static const struct {
struct usb_cdc_header_descriptor header;
struct usb_cdc_call_management_descriptor call_mgmt;
struct usb_cdc_acm_descriptor acm;
struct usb_cdc_union_descriptor cdc_union;
} __attribute__((packed)) cdcacm_functional_descriptors = {
.header = {
.bFunctionLength = sizeof(struct usb_cdc_header_descriptor),
.bDescriptorType = CS_INTERFACE,
.bDescriptorSubtype = USB_CDC_TYPE_HEADER,
.bcdCDC = 0x0110,
},
.call_mgmt = {
.bFunctionLength =
sizeof(struct usb_cdc_call_management_descriptor),
.bDescriptorType = CS_INTERFACE,
.bDescriptorSubtype = USB_CDC_TYPE_CALL_MANAGEMENT,
.bmCapabilities = 0,
.bDataInterface = 1,
},
.acm = {
.bFunctionLength = sizeof(struct usb_cdc_acm_descriptor),
.bDescriptorType = CS_INTERFACE,
.bDescriptorSubtype = USB_CDC_TYPE_ACM,
.bmCapabilities = 0,
},
.cdc_union = {
.bFunctionLength = sizeof(struct usb_cdc_union_descriptor),
.bDescriptorType = CS_INTERFACE,
.bDescriptorSubtype = USB_CDC_TYPE_UNION,
.bControlInterface = 0,
.bSubordinateInterface0 = 1,
}
};
static const struct usb_interface_descriptor comm_iface[] = {{
.bLength = USB_DT_INTERFACE_SIZE,
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 1,
.bInterfaceClass = USB_CLASS_CDC,
.bInterfaceSubClass = USB_CDC_SUBCLASS_ACM,
.bInterfaceProtocol = USB_CDC_PROTOCOL_AT,
.iInterface = 0,
.endpoint = comm_endp,
.extra = &cdcacm_functional_descriptors,
.extralen = sizeof(cdcacm_functional_descriptors)
}};
static const struct usb_interface_descriptor data_iface[] = {{
.bLength = USB_DT_INTERFACE_SIZE,
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 1,
.bAlternateSetting = 0,
.bNumEndpoints = 2,
.bInterfaceClass = USB_CLASS_DATA,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = 0,
.endpoint = data_endp,
}};
static const struct usb_interface ifaces[] = {{
.num_altsetting = 1,
.altsetting = comm_iface,
}, {
.num_altsetting = 1,
.altsetting = data_iface,
}};
static const struct usb_config_descriptor config = {
.bLength = USB_DT_CONFIGURATION_SIZE,
.bDescriptorType = USB_DT_CONFIGURATION,
.wTotalLength = 0,
.bNumInterfaces = 2,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = 0x80,
.bMaxPower = 0x32,
.interface = ifaces,
};
static const char *usb_strings[] = {
"Black Sphere Technologies",
"CDC-ACM Demo",
"DEMO",
};
static int cdcacm_control_request(usbd_device *usbd_dev, struct usb_setup_data *req, u8 **buf,
u16 *len, void (**complete)(usbd_device *usbd_dev, struct usb_setup_data *req))
{
(void)complete;
(void)buf;
(void)usbd_dev;
switch (req->bRequest) {
case USB_CDC_REQ_SET_CONTROL_LINE_STATE: {
/*
* This Linux cdc_acm driver requires this to be implemented
* even though it's optional in the CDC spec, and we don't
* advertise it in the ACM functional descriptor.
*/
return 1;
}
case USB_CDC_REQ_SET_LINE_CODING:
if (*len < sizeof(struct usb_cdc_line_coding))
return 0;
return 1;
}
return 0;
}
static void cdcacm_data_rx_cb(usbd_device *usbd_dev, u8 ep)
{
(void)ep;
char buf[64];
int len = usbd_ep_read_packet(usbd_dev, 0x01, buf, 64);
if (len) {
while (usbd_ep_write_packet(usbd_dev, 0x82, buf, len) == 0)
;
}
gpio_toggle(GPIOC, GPIO5);
}
static void cdcacm_set_config(usbd_device *usbd_dev, u16 wValue)
{
(void)wValue;
usbd_ep_setup(usbd_dev, 0x01, USB_ENDPOINT_ATTR_BULK, 64, cdcacm_data_rx_cb);
usbd_ep_setup(usbd_dev, 0x82, USB_ENDPOINT_ATTR_BULK, 64, NULL);
usbd_ep_setup(usbd_dev, 0x83, USB_ENDPOINT_ATTR_INTERRUPT, 16, NULL);
usbd_register_control_callback(
usbd_dev,
USB_REQ_TYPE_CLASS | USB_REQ_TYPE_INTERFACE,
USB_REQ_TYPE_TYPE | USB_REQ_TYPE_RECIPIENT,
cdcacm_control_request);
}
int main(void)
{
usbd_device *usbd_dev;
rcc_clock_setup_hse_3v3(&hse_8mhz_3v3[CLOCK_3V3_120MHZ]);
rcc_peripheral_enable_clock(&RCC_AHB1ENR, RCC_AHB1ENR_IOPAEN);
rcc_peripheral_enable_clock(&RCC_AHB2ENR, RCC_AHB2ENR_OTGFSEN);
gpio_mode_setup(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE,
GPIO9 | GPIO11 | GPIO12);
gpio_set_af(GPIOA, GPIO_AF10, GPIO9 | GPIO11 | GPIO12);
usbd_dev = usbd_init(&otgfs_usb_driver, &dev, &config, usb_strings, 3);
usbd_register_set_config_callback(usbd_dev, cdcacm_set_config);
while (1)
usbd_poll(usbd_dev);
}