EMTime/libopencm3-examples
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Initial commit.

Browse Source
This commit is contained in:
Piotr Esden-Tempski
2013-04-19 17:19:32 -07:00
commit 9d5526f773
324 changed files with 22845 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

108
examples/lpc43xx/hackrf-jellybean/i2c/i2cdemo.c Normal file
View File

@@ -0,0 +1,108 @@
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2010 Uwe Hermann <uwe@hermann-uwe.de>
* Copyright (C) 2012 Michael Ossmann <mike@ossmann.com>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
#include <libopencm3/lpc43xx/gpio.h>
#include <libopencm3/lpc43xx/i2c.h>
#include "../jellybean_conf.h"
static void gpio_setup(void)
{
/* Configure SCU Pin Mux as GPIO */
scu_pinmux(SCU_PINMUX_LED1, SCU_GPIO_FAST);
scu_pinmux(SCU_PINMUX_LED2, SCU_GPIO_FAST);
scu_pinmux(SCU_PINMUX_LED3, SCU_GPIO_FAST);
scu_pinmux(SCU_PINMUX_EN1V8, SCU_GPIO_FAST);
scu_pinmux(SCU_PINMUX_BOOT0, SCU_GPIO_FAST);
scu_pinmux(SCU_PINMUX_BOOT1, SCU_GPIO_FAST);
scu_pinmux(SCU_PINMUX_BOOT2, SCU_GPIO_FAST);
scu_pinmux(SCU_PINMUX_BOOT3, SCU_GPIO_FAST);
/* Configure all GPIO as Input (safe state) */
GPIO0_DIR = 0;
GPIO1_DIR = 0;
GPIO2_DIR = 0;
GPIO3_DIR = 0;
GPIO4_DIR = 0;
GPIO5_DIR = 0;
GPIO6_DIR = 0;
GPIO7_DIR = 0;
/* Configure GPIO as Output */
GPIO2_DIR |= (PIN_LED1|PIN_LED2|PIN_LED3); /* Configure GPIO2[1/2/8] (P4_1/2 P6_12) as output. */
GPIO3_DIR |= PIN_EN1V8; /* GPIO3[6] on P6_10 as output. */
}
#define SI5351C_I2C_ADDR (0x60 << 1)
/* write to single register */
/* Not used!
static void si5351c_write_reg(uint8_t reg, uint8_t val)
{
i2c0_tx_start();
i2c0_tx_byte(SI5351C_I2C_ADDR | I2C_WRITE);
i2c0_tx_byte(reg);
i2c0_tx_byte(val);
i2c0_stop();
}
*/
/* read single register */
static uint8_t si5351c_read_reg(uint8_t reg)
{
uint8_t val;
/* set register address with write */
i2c0_tx_start();
i2c0_tx_byte(SI5351C_I2C_ADDR | I2C_WRITE);
i2c0_tx_byte(reg);
/* read the value */
i2c0_tx_start();
i2c0_tx_byte(SI5351C_I2C_ADDR | I2C_READ);
val = i2c0_rx_byte();
i2c0_stop();
return val;
}
int main(void)
{
int i;
gpio_setup();
i2c0_init();
gpio_set(PORT_EN1V8, PIN_EN1V8); /* 1V8 on */
while (1) {
if (si5351c_read_reg(0) == 0x10)
gpio_set(GPIO2, GPIOPIN1); /* LED on */
else
gpio_clear(GPIO2, GPIOPIN1); /* LED off */
for (i = 0; i < 1000; i++) /* Wait a bit. */
__asm__("nop");
}
return 0;
}