Modify all of the examples to use the Makefile.rules
This commit is contained in:
Frantisek Burian
@@ -18,120 +18,26 @@
|
|||||||
## along with this library. If not, see <http://www.gnu.org/licenses/>.
|
## along with this library. If not, see <http://www.gnu.org/licenses/>.
|
||||||
##
|
##
|
||||||
|
|
||||||
PREFIX ?= arm-none-eabi
|
LIBNAME = opencm3_lm3s
|
||||||
#PREFIX ?= arm-elf
|
DEFS = -DLM3S
|
||||||
CC = $(PREFIX)-gcc
|
|
||||||
LD = $(PREFIX)-gcc
|
|
||||||
OBJCOPY = $(PREFIX)-objcopy
|
|
||||||
OBJDUMP = $(PREFIX)-objdump
|
|
||||||
|
|
||||||
TOOLCHAIN_DIR ?= ../../../../libopencm3
|
ARCH_FLAGS = -mthumb -mcpu=cortex-m3 -msoft-float
|
||||||
ifeq ($(wildcard ../../../../libopencm3/lib/libopencm3_lm3s.a),)
|
|
||||||
ifneq ($(strip $(shell which $(CC))),)
|
|
||||||
TOOLCHAIN_DIR := $(shell dirname `which $(CC)`)/../$(PREFIX)
|
|
||||||
endif
|
|
||||||
else
|
|
||||||
ifeq ($(V),1)
|
|
||||||
$(info We seem to be building the example in the source directory. Using local library!)
|
|
||||||
endif
|
|
||||||
endif
|
|
||||||
|
|
||||||
CFLAGS += -O0 -g3 \
|
################################################################################
|
||||||
-Wall -Wextra -Wimplicit-function-declaration \
|
# OpenOCD specific variables
|
||||||
-Wredundant-decls -Wmissing-prototypes -Wstrict-prototypes \
|
|
||||||
-Wundef -Wshadow \
|
|
||||||
-I$(TOOLCHAIN_DIR)/include -fno-common \
|
|
||||||
-mcpu=cortex-m3 -mthumb -MD -DLM3S
|
|
||||||
LDSCRIPT ?= $(BINARY).ld
|
|
||||||
LDFLAGS += -L$(TOOLCHAIN_DIR)/lib \
|
|
||||||
-T$(LDSCRIPT) -nostartfiles -Wl,--gc-sections
|
|
||||||
OBJS += $(BINARY).o
|
|
||||||
|
|
||||||
OOCD ?= openocd
|
OOCD ?= openocd
|
||||||
OOCD_INTERFACE ?= flossjtag
|
OOCD_INTERFACE ?= flossjtag
|
||||||
OOCD_BOARD ?= olimex_stm32_h103
|
OOCD_BOARD ?= olimex_stm32_h103
|
||||||
# FIXME
|
|
||||||
|
|
||||||
# Be silent per default, but 'make V=1' will show all compiler calls.
|
################################################################################
|
||||||
ifneq ($(V),1)
|
# Black Magic Probe specific variables
|
||||||
Q := @
|
# Set the BMP_PORT to a serial port and then BMP is used for flashing
|
||||||
NULL := 2>/dev/null
|
BMP_PORT ?=
|
||||||
else
|
|
||||||
LDFLAGS += -Wl,--print-gc-sections
|
|
||||||
endif
|
|
||||||
|
|
||||||
.SUFFIXES: .elf .bin .hex .srec .list .images
|
################################################################################
|
||||||
.SECONDEXPANSION:
|
# texane/stlink specific variables
|
||||||
.SECONDARY:
|
#STLINK_PORT ?= :4242
|
||||||
|
|
||||||
all: images
|
|
||||||
|
|
||||||
images: $(BINARY).images
|
|
||||||
flash: $(BINARY).flash
|
|
||||||
|
|
||||||
%.images: %.bin %.hex %.srec %.list
|
|
||||||
@#printf "*** $* images generated ***\n"
|
|
||||||
|
|
||||||
%.bin: %.elf
|
|
||||||
@#printf " OBJCOPY $(*).bin\n"
|
|
||||||
$(Q)$(OBJCOPY) -Obinary $(*).elf $(*).bin
|
|
||||||
|
|
||||||
%.hex: %.elf
|
|
||||||
@#printf " OBJCOPY $(*).hex\n"
|
|
||||||
$(Q)$(OBJCOPY) -Oihex $(*).elf $(*).hex
|
|
||||||
|
|
||||||
%.srec: %.elf
|
|
||||||
@#printf " OBJCOPY $(*).srec\n"
|
|
||||||
$(Q)$(OBJCOPY) -Osrec $(*).elf $(*).srec
|
|
||||||
|
|
||||||
%.list: %.elf
|
|
||||||
@#printf " OBJDUMP $(*).list\n"
|
|
||||||
$(Q)$(OBJDUMP) -S $(*).elf > $(*).list
|
|
||||||
|
|
||||||
%.elf: $(OBJS) $(LDSCRIPT) $(TOOLCHAIN_DIR)/lib/libopencm3_lm3s.a
|
|
||||||
@#printf " LD $(subst $(shell pwd)/,,$(@))\n"
|
|
||||||
$(Q)$(LD) $(LDFLAGS) -o $(*).elf $(OBJS) -lopencm3_lm3s
|
|
||||||
|
|
||||||
%.o: %.c Makefile
|
|
||||||
@#printf " CC $(subst $(shell pwd)/,,$(@))\n"
|
|
||||||
$(Q)$(CC) $(CFLAGS) -o $@ -c $<
|
|
||||||
|
|
||||||
clean:
|
|
||||||
$(Q)rm -f *.o
|
|
||||||
$(Q)rm -f *.d
|
|
||||||
$(Q)rm -f *.elf
|
|
||||||
$(Q)rm -f *.bin
|
|
||||||
$(Q)rm -f *.hex
|
|
||||||
$(Q)rm -f *.srec
|
|
||||||
$(Q)rm -f *.list
|
|
||||||
|
|
||||||
# FIXME: Replace STM32 stuff with proper LPC13XX OpenOCD support later.
|
|
||||||
ifeq ($(OOCD_SERIAL),)
|
|
||||||
%.flash: %.hex
|
|
||||||
@printf " FLASH $<\n"
|
|
||||||
@# IMPORTANT: Don't use "resume", only "reset" will work correctly!
|
|
||||||
$(Q)$(OOCD) -f interface/$(OOCD_INTERFACE).cfg \
|
|
||||||
-f board/$(OOCD_BOARD).cfg \
|
|
||||||
-c "init" -c "reset init" \
|
|
||||||
-c "stm32x mass_erase 0" \
|
|
||||||
-c "flash write_image $(*).hex" \
|
|
||||||
-c "reset" \
|
|
||||||
-c "shutdown" $(NULL)
|
|
||||||
else
|
|
||||||
%.flash: %.hex
|
|
||||||
@printf " FLASH $<\n"
|
|
||||||
@# IMPORTANT: Don't use "resume", only "reset" will work correctly!
|
|
||||||
$(Q)$(OOCD) -f interface/$(OOCD_INTERFACE).cfg \
|
|
||||||
-f board/$(OOCD_BOARD).cfg \
|
|
||||||
-c "ft2232_serial $(OOCD_SERIAL)" \
|
|
||||||
-c "init" -c "reset init" \
|
|
||||||
-c "stm32x mass_erase 0" \
|
|
||||||
-c "flash write_image $(*).hex" \
|
|
||||||
-c "reset" \
|
|
||||||
-c "shutdown" $(NULL)
|
|
||||||
endif
|
|
||||||
|
|
||||||
.PHONY: images clean
|
|
||||||
|
|
||||||
-include $(OBJS:.o=.d)
|
|
||||||
|
|
||||||
|
include ../../../Makefile.rules
|
||||||
|
|||||||
@@ -19,106 +19,29 @@
|
|||||||
## along with this library. If not, see <http://www.gnu.org/licenses/>.
|
## along with this library. If not, see <http://www.gnu.org/licenses/>.
|
||||||
##
|
##
|
||||||
|
|
||||||
PREFIX ?= arm-none-eabi
|
LIBNAME = opencm3_lm4f
|
||||||
CC = $(PREFIX)-gcc
|
DEFS = -DLM4F
|
||||||
LD = $(PREFIX)-gcc
|
|
||||||
OBJCOPY = $(PREFIX)-objcopy
|
|
||||||
OBJDUMP = $(PREFIX)-objdump
|
|
||||||
|
|
||||||
TOOLCHAIN_DIR ?= ../../../../libopencm3
|
ARCH_FLAGS = -mthumb -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16
|
||||||
ifeq ($(wildcard ../../../../libopencm3/lib/libopencm3_lm4f.a),)
|
|
||||||
ifneq ($(strip $(shell which $(CC))),)
|
|
||||||
TOOLCHAIN_DIR := $(shell dirname `which $(CC)`)/../$(PREFIX)
|
|
||||||
endif
|
|
||||||
else
|
|
||||||
ifeq ($(V),1)
|
|
||||||
$(info We seem to be building the example in the source directory. Using local library!)
|
|
||||||
endif
|
|
||||||
endif
|
|
||||||
|
|
||||||
ARCH_FLAGS = -mthumb -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16
|
################################################################################
|
||||||
CFLAGS += -O0 -g3 \
|
# OpenOCD specific variables
|
||||||
-Wall -Wextra -Wimplicit-function-declaration \
|
|
||||||
-Wredundant-decls -Wmissing-prototypes -Wstrict-prototypes \
|
|
||||||
-Wundef -Wshadow \
|
|
||||||
-I$(TOOLCHAIN_DIR)/include \
|
|
||||||
-fno-common $(ARCH_FLAGS) -MD -DLM4F
|
|
||||||
LDSCRIPT ?= $(BINARY).ld
|
|
||||||
LDFLAGS += --static -Wl,--start-group -lc -lgcc -lnosys -Wl,--end-group \
|
|
||||||
-L$(TOOLCHAIN_DIR)/lib \
|
|
||||||
-T$(LDSCRIPT) -nostartfiles -Wl,--gc-sections \
|
|
||||||
$(ARCH_FLAGS)
|
|
||||||
|
|
||||||
OBJS += $(BINARY).o
|
|
||||||
|
|
||||||
# Support for ICDI is available starting with openocd 0.7.0
|
# Support for ICDI is available starting with openocd 0.7.0
|
||||||
|
|
||||||
OOCD ?= openocd
|
OOCD ?= openocd
|
||||||
|
OOCD_INTERFACE ?= flossjtag
|
||||||
OOCD_BOARD ?= ek-lm4f120xl
|
OOCD_BOARD ?= ek-lm4f120xl
|
||||||
|
|
||||||
# Be silent per default, but 'make V=1' will show all compiler calls.
|
################################################################################
|
||||||
ifneq ($(V),1)
|
# Black Magic Probe specific variables
|
||||||
Q := @
|
# Set the BMP_PORT to a serial port and then BMP is used for flashing
|
||||||
NULL := 2>/dev/null
|
BMP_PORT ?=
|
||||||
else
|
|
||||||
LDFLAGS += -Wl,--print-gc-sections
|
|
||||||
endif
|
|
||||||
|
|
||||||
.SUFFIXES: .elf .bin .hex .srec .list .images
|
################################################################################
|
||||||
.SECONDEXPANSION:
|
# texane/stlink specific variables
|
||||||
.SECONDARY:
|
#STLINK_PORT ?= :4242
|
||||||
|
|
||||||
all: images
|
|
||||||
|
|
||||||
images: $(BINARY).images
|
include ../../../Makefile.rules
|
||||||
flash: $(BINARY).flash
|
|
||||||
|
|
||||||
%.images: %.bin %.hex %.srec %.list
|
|
||||||
@#printf "*** $* images generated ***\n"
|
|
||||||
|
|
||||||
%.bin: %.elf
|
|
||||||
@#printf " OBJCOPY $(*).bin\n"
|
|
||||||
$(Q)$(OBJCOPY) -Obinary $(*).elf $(*).bin
|
|
||||||
|
|
||||||
%.hex: %.elf
|
|
||||||
@#printf " OBJCOPY $(*).hex\n"
|
|
||||||
$(Q)$(OBJCOPY) -Oihex $(*).elf $(*).hex
|
|
||||||
|
|
||||||
%.srec: %.elf
|
|
||||||
@#printf " OBJCOPY $(*).srec\n"
|
|
||||||
$(Q)$(OBJCOPY) -Osrec $(*).elf $(*).srec
|
|
||||||
|
|
||||||
%.list: %.elf
|
|
||||||
@#printf " OBJDUMP $(*).list\n"
|
|
||||||
$(Q)$(OBJDUMP) -S $(*).elf > $(*).list
|
|
||||||
|
|
||||||
%.elf: $(OBJS) $(LDSCRIPT) $(TOOLCHAIN_DIR)/lib/libopencm3_lm4f.a
|
|
||||||
@#printf " LD $(subst $(shell pwd)/,,$(@))\n"
|
|
||||||
$(Q)$(LD) -o $(*).elf $(OBJS) -lopencm3_lm4f $(LDFLAGS)
|
|
||||||
|
|
||||||
%.o: %.c Makefile
|
|
||||||
@#printf " CC $(subst $(shell pwd)/,,$(@))\n"
|
|
||||||
$(Q)$(CC) $(CFLAGS) -o $@ -c $<
|
|
||||||
|
|
||||||
clean:
|
|
||||||
$(Q)rm -f *.o
|
|
||||||
$(Q)rm -f *.d
|
|
||||||
$(Q)rm -f *.elf
|
|
||||||
$(Q)rm -f *.bin
|
|
||||||
$(Q)rm -f *.hex
|
|
||||||
$(Q)rm -f *.srec
|
|
||||||
$(Q)rm -f *.list
|
|
||||||
|
|
||||||
# FIXME: Replace STM32 stuff with proper Stellaris support.
|
|
||||||
%.flash: %.hex
|
|
||||||
@printf " FLASH $<\n"
|
|
||||||
@# IMPORTANT: Don't use "resume", only "reset" will work correctly!
|
|
||||||
$(Q)$(OOCD) -f board/$(OOCD_BOARD).cfg \
|
|
||||||
-c "init" -c "reset init" \
|
|
||||||
-c "flash write_image erase $(*).hex 0" \
|
|
||||||
-c "reset" \
|
|
||||||
-c "shutdown" $(NULL)
|
|
||||||
|
|
||||||
.PHONY: images clean
|
|
||||||
|
|
||||||
-include $(OBJS:.o=.d)
|
|
||||||
|
|
||||||
|
|||||||
@@ -18,120 +18,27 @@
|
|||||||
## along with this library. If not, see <http://www.gnu.org/licenses/>.
|
## along with this library. If not, see <http://www.gnu.org/licenses/>.
|
||||||
##
|
##
|
||||||
|
|
||||||
PREFIX ?= arm-none-eabi
|
LIBNAME = opencm3_lpc13xx
|
||||||
#PREFIX ?= arm-elf
|
DEFS = -DLPC13XX
|
||||||
CC = $(PREFIX)-gcc
|
|
||||||
LD = $(PREFIX)-gcc
|
|
||||||
OBJCOPY = $(PREFIX)-objcopy
|
|
||||||
OBJDUMP = $(PREFIX)-objdump
|
|
||||||
|
|
||||||
TOOLCHAIN_DIR ?= ../../../../libopencm3
|
ARCH_FLAGS = -mthumb -mcpu=cortex-m3 -msoft-float -mfix-cortex-m3-ldrd
|
||||||
ifeq ($(wildcard ../../../../libopencm3/lib/libopencm3_lpc13xx.a),)
|
|
||||||
ifneq ($(strip $(shell which $(CC))),)
|
|
||||||
TOOLCHAIN_DIR := $(shell dirname `which $(CC)`)/../$(PREFIX)
|
|
||||||
endif
|
|
||||||
else
|
|
||||||
ifeq ($(V),1)
|
|
||||||
$(info We seem to be building the example in the source directory. Using local library!)
|
|
||||||
endif
|
|
||||||
endif
|
|
||||||
|
|
||||||
CFLAGS += -Os -g \
|
################################################################################
|
||||||
-Wall -Wextra -Wimplicit-function-declaration \
|
# OpenOCD specific variables
|
||||||
-Wredundant-decls -Wmissing-prototypes -Wstrict-prototypes \
|
|
||||||
-Wundef -Wshadow \
|
|
||||||
-I$(TOOLCHAIN_DIR)/include -fno-common \
|
|
||||||
-mcpu=cortex-m3 -mthumb -MD -DLPC13XX
|
|
||||||
LDSCRIPT ?= $(BINARY).ld
|
|
||||||
LDFLAGS += -L$(TOOLCHAIN_DIR)/lib \
|
|
||||||
-T$(LDSCRIPT) -nostartfiles -Wl,--gc-sections
|
|
||||||
OBJS += $(BINARY).o
|
|
||||||
|
|
||||||
OOCD ?= openocd
|
OOCD ?= openocd
|
||||||
OOCD_INTERFACE ?= flossjtag
|
OOCD_INTERFACE ?= flossjtag
|
||||||
OOCD_BOARD ?= olimex_stm32_h103
|
OOCD_BOARD ?= olimex_stm32_h103
|
||||||
# FIXME
|
|
||||||
|
|
||||||
# Be silent per default, but 'make V=1' will show all compiler calls.
|
################################################################################
|
||||||
ifneq ($(V),1)
|
# Black Magic Probe specific variables
|
||||||
Q := @
|
# Set the BMP_PORT to a serial port and then BMP is used for flashing
|
||||||
NULL := 2>/dev/null
|
BMP_PORT ?=
|
||||||
else
|
|
||||||
LDFLAGS += -Wl,--print-gc-sections
|
|
||||||
endif
|
|
||||||
|
|
||||||
.SUFFIXES: .elf .bin .hex .srec .list .images
|
################################################################################
|
||||||
.SECONDEXPANSION:
|
# texane/stlink specific variables
|
||||||
.SECONDARY:
|
#STLINK_PORT ?= :4242
|
||||||
|
|
||||||
all: images
|
|
||||||
|
|
||||||
images: $(BINARY).images
|
include ../../../Makefile.rules
|
||||||
flash: $(BINARY).flash
|
|
||||||
|
|
||||||
%.images: %.bin %.hex %.srec %.list
|
|
||||||
@#printf "*** $* images generated ***\n"
|
|
||||||
|
|
||||||
%.bin: %.elf
|
|
||||||
@#printf " OBJCOPY $(*).bin\n"
|
|
||||||
$(Q)$(OBJCOPY) -Obinary $(*).elf $(*).bin
|
|
||||||
|
|
||||||
%.hex: %.elf
|
|
||||||
@#printf " OBJCOPY $(*).hex\n"
|
|
||||||
$(Q)$(OBJCOPY) -Oihex $(*).elf $(*).hex
|
|
||||||
|
|
||||||
%.srec: %.elf
|
|
||||||
@#printf " OBJCOPY $(*).srec\n"
|
|
||||||
$(Q)$(OBJCOPY) -Osrec $(*).elf $(*).srec
|
|
||||||
|
|
||||||
%.list: %.elf
|
|
||||||
@#printf " OBJDUMP $(*).list\n"
|
|
||||||
$(Q)$(OBJDUMP) -S $(*).elf > $(*).list
|
|
||||||
|
|
||||||
%.elf: $(OBJS) $(LDSCRIPT) $(TOOLCHAIN_DIR)/lib/libopencm3_lpc13xx.a
|
|
||||||
@#printf " LD $(subst $(shell pwd)/,,$(@))\n"
|
|
||||||
$(Q)$(LD) $(LDFLAGS) -o $(*).elf $(OBJS) -lopencm3_lpc13xx
|
|
||||||
|
|
||||||
%.o: %.c Makefile
|
|
||||||
@#printf " CC $(subst $(shell pwd)/,,$(@))\n"
|
|
||||||
$(Q)$(CC) $(CFLAGS) -o $@ -c $<
|
|
||||||
|
|
||||||
clean:
|
|
||||||
$(Q)rm -f *.o
|
|
||||||
$(Q)rm -f *.d
|
|
||||||
$(Q)rm -f *.elf
|
|
||||||
$(Q)rm -f *.bin
|
|
||||||
$(Q)rm -f *.hex
|
|
||||||
$(Q)rm -f *.srec
|
|
||||||
$(Q)rm -f *.list
|
|
||||||
|
|
||||||
# FIXME: Replace STM32 stuff with proper LPC13XX OpenOCD support later.
|
|
||||||
ifeq ($(OOCD_SERIAL),)
|
|
||||||
%.flash: %.hex
|
|
||||||
@printf " FLASH $<\n"
|
|
||||||
@# IMPORTANT: Don't use "resume", only "reset" will work correctly!
|
|
||||||
$(Q)$(OOCD) -f interface/$(OOCD_INTERFACE).cfg \
|
|
||||||
-f board/$(OOCD_BOARD).cfg \
|
|
||||||
-c "init" -c "reset init" \
|
|
||||||
-c "stm32x mass_erase 0" \
|
|
||||||
-c "flash write_image $(*).hex" \
|
|
||||||
-c "reset" \
|
|
||||||
-c "shutdown" $(NULL)
|
|
||||||
else
|
|
||||||
%.flash: %.hex
|
|
||||||
@printf " FLASH $<\n"
|
|
||||||
@# IMPORTANT: Don't use "resume", only "reset" will work correctly!
|
|
||||||
$(Q)$(OOCD) -f interface/$(OOCD_INTERFACE).cfg \
|
|
||||||
-f board/$(OOCD_BOARD).cfg \
|
|
||||||
-c "ft2232_serial $(OOCD_SERIAL)" \
|
|
||||||
-c "init" -c "reset init" \
|
|
||||||
-c "stm32x mass_erase 0" \
|
|
||||||
-c "flash write_image $(*).hex" \
|
|
||||||
-c "reset" \
|
|
||||||
-c "shutdown" $(NULL)
|
|
||||||
endif
|
|
||||||
|
|
||||||
.PHONY: images clean
|
|
||||||
|
|
||||||
-include $(OBJS:.o=.d)
|
|
||||||
|
|
||||||
|
|||||||
@@ -18,120 +18,28 @@
|
|||||||
## along with this library. If not, see <http://www.gnu.org/licenses/>.
|
## along with this library. If not, see <http://www.gnu.org/licenses/>.
|
||||||
##
|
##
|
||||||
|
|
||||||
PREFIX ?= arm-none-eabi
|
|
||||||
#PREFIX ?= arm-elf
|
|
||||||
CC = $(PREFIX)-gcc
|
|
||||||
LD = $(PREFIX)-gcc
|
|
||||||
OBJCOPY = $(PREFIX)-objcopy
|
|
||||||
OBJDUMP = $(PREFIX)-objdump
|
|
||||||
|
|
||||||
TOOLCHAIN_DIR ?= ../../../../libopencm3
|
LIBNAME = opencm3_lpc17xx
|
||||||
ifeq ($(wildcard ../../../../libopencm3/lib/libopencm3_lpc17xx.a),)
|
DEFS = -DLPC17XX
|
||||||
ifneq ($(strip $(shell which $(CC))),)
|
|
||||||
TOOLCHAIN_DIR := $(shell dirname `which $(CC)`)/../$(PREFIX)
|
|
||||||
endif
|
|
||||||
else
|
|
||||||
ifeq ($(V),1)
|
|
||||||
$(info We seem to be building the example in the source directory. Using local library!)
|
|
||||||
endif
|
|
||||||
endif
|
|
||||||
|
|
||||||
CFLAGS += -O0 -g \
|
ARCH_FLAGS = -mthumb -mcpu=cortex-m3 -msoft-float -mfix-cortex-m3-ldrd
|
||||||
-Wall -Wextra -Wimplicit-function-declaration \
|
|
||||||
-Wredundant-decls -Wmissing-prototypes -Wstrict-prototypes \
|
################################################################################
|
||||||
-Wundef -Wshadow \
|
# OpenOCD specific variables
|
||||||
-I$(TOOLCHAIN_DIR)/include -fno-common \
|
|
||||||
-mcpu=cortex-m3 -mthumb -MD -DLPC17XX
|
|
||||||
LDSCRIPT ?= $(BINARY).ld
|
|
||||||
LDFLAGS += -L$(TOOLCHAIN_DIR)/lib \
|
|
||||||
-T$(LDSCRIPT) -nostartfiles -Wl,--gc-sections
|
|
||||||
OBJS += $(BINARY).o
|
|
||||||
|
|
||||||
OOCD ?= openocd
|
OOCD ?= openocd
|
||||||
OOCD_INTERFACE ?= flossjtag
|
OOCD_INTERFACE ?= flossjtag
|
||||||
OOCD_BOARD ?= olimex_stm32_h103
|
OOCD_BOARD ?= olimex_stm32_h103
|
||||||
# FIXME
|
|
||||||
|
|
||||||
# Be silent per default, but 'make V=1' will show all compiler calls.
|
################################################################################
|
||||||
ifneq ($(V),1)
|
# Black Magic Probe specific variables
|
||||||
Q := @
|
# Set the BMP_PORT to a serial port and then BMP is used for flashing
|
||||||
NULL := 2>/dev/null
|
BMP_PORT ?=
|
||||||
else
|
|
||||||
LDFLAGS += -Wl,--print-gc-sections
|
|
||||||
endif
|
|
||||||
|
|
||||||
.SUFFIXES: .elf .bin .hex .srec .list .images
|
################################################################################
|
||||||
.SECONDEXPANSION:
|
# texane/stlink specific variables
|
||||||
.SECONDARY:
|
#STLINK_PORT ?= :4242
|
||||||
|
|
||||||
all: images
|
|
||||||
|
|
||||||
images: $(BINARY).images
|
include ../../../Makefile.rules
|
||||||
flash: $(BINARY).flash
|
|
||||||
|
|
||||||
%.images: %.bin %.hex %.srec %.list
|
|
||||||
@#printf "*** $* images generated ***\n"
|
|
||||||
|
|
||||||
%.bin: %.elf
|
|
||||||
@#printf " OBJCOPY $(*).bin\n"
|
|
||||||
$(Q)$(OBJCOPY) -Obinary $(*).elf $(*).bin
|
|
||||||
|
|
||||||
%.hex: %.elf
|
|
||||||
@#printf " OBJCOPY $(*).hex\n"
|
|
||||||
$(Q)$(OBJCOPY) -Oihex $(*).elf $(*).hex
|
|
||||||
|
|
||||||
%.srec: %.elf
|
|
||||||
@#printf " OBJCOPY $(*).srec\n"
|
|
||||||
$(Q)$(OBJCOPY) -Osrec $(*).elf $(*).srec
|
|
||||||
|
|
||||||
%.list: %.elf
|
|
||||||
@#printf " OBJDUMP $(*).list\n"
|
|
||||||
$(Q)$(OBJDUMP) -S $(*).elf > $(*).list
|
|
||||||
|
|
||||||
%.elf: $(OBJS) $(LDSCRIPT) $(TOOLCHAIN_DIR)/lib/libopencm3_lpc17xx.a
|
|
||||||
@#printf " LD $(subst $(shell pwd)/,,$(@))\n"
|
|
||||||
$(Q)$(LD) $(LDFLAGS) -o $(*).elf $(OBJS) -lopencm3_lpc17xx
|
|
||||||
|
|
||||||
%.o: %.c Makefile
|
|
||||||
@#printf " CC $(subst $(shell pwd)/,,$(@))\n"
|
|
||||||
$(Q)$(CC) $(CFLAGS) -o $@ -c $<
|
|
||||||
|
|
||||||
clean:
|
|
||||||
$(Q)rm -f *.o
|
|
||||||
$(Q)rm -f *.d
|
|
||||||
$(Q)rm -f *.elf
|
|
||||||
$(Q)rm -f *.bin
|
|
||||||
$(Q)rm -f *.hex
|
|
||||||
$(Q)rm -f *.srec
|
|
||||||
$(Q)rm -f *.list
|
|
||||||
|
|
||||||
# FIXME: Replace STM32 stuff with proper LPC13XX OpenOCD support later.
|
|
||||||
ifeq ($(OOCD_SERIAL),)
|
|
||||||
%.flash: %.hex
|
|
||||||
@printf " FLASH $<\n"
|
|
||||||
@# IMPORTANT: Don't use "resume", only "reset" will work correctly!
|
|
||||||
$(Q)$(OOCD) -f interface/$(OOCD_INTERFACE).cfg \
|
|
||||||
-f board/$(OOCD_BOARD).cfg \
|
|
||||||
-c "init" -c "reset init" \
|
|
||||||
-c "stm32x mass_erase 0" \
|
|
||||||
-c "flash write_image $(*).hex" \
|
|
||||||
-c "reset" \
|
|
||||||
-c "shutdown" $(NULL)
|
|
||||||
else
|
|
||||||
%.flash: %.hex
|
|
||||||
@printf " FLASH $<\n"
|
|
||||||
@# IMPORTANT: Don't use "resume", only "reset" will work correctly!
|
|
||||||
$(Q)$(OOCD) -f interface/$(OOCD_INTERFACE).cfg \
|
|
||||||
-f board/$(OOCD_BOARD).cfg \
|
|
||||||
-c "ft2232_serial $(OOCD_SERIAL)" \
|
|
||||||
-c "init" -c "reset init" \
|
|
||||||
-c "stm32x mass_erase 0" \
|
|
||||||
-c "flash write_image $(*).hex" \
|
|
||||||
-c "reset" \
|
|
||||||
-c "shutdown" $(NULL)
|
|
||||||
endif
|
|
||||||
|
|
||||||
.PHONY: images clean
|
|
||||||
|
|
||||||
-include $(OBJS:.o=.d)
|
|
||||||
|
|
||||||
|
|||||||
@@ -20,121 +20,27 @@
|
|||||||
## along with this library. If not, see <http://www.gnu.org/licenses/>.
|
## along with this library. If not, see <http://www.gnu.org/licenses/>.
|
||||||
##
|
##
|
||||||
|
|
||||||
PREFIX ?= arm-none-eabi
|
|
||||||
#PREFIX ?= arm-elf
|
|
||||||
CC = $(PREFIX)-gcc
|
|
||||||
LD = $(PREFIX)-gcc
|
|
||||||
OBJCOPY = $(PREFIX)-objcopy
|
|
||||||
OBJDUMP = $(PREFIX)-objdump
|
|
||||||
GDB = $(PREFIX)-gdb
|
|
||||||
|
|
||||||
TOOLCHAIN_DIR ?= ../../../../libopencm3
|
LIBNAME = opencm3_lpc43xx
|
||||||
ifeq ($(wildcard ../../../../libopencm3/lib/libopencm3_lpc43xx.a),)
|
DEFS = -DLPC43XX
|
||||||
ifneq ($(strip $(shell which $(CC))),)
|
|
||||||
TOOLCHAIN_DIR := $(shell dirname `which $(CC)`)/../$(PREFIX)
|
|
||||||
endif
|
|
||||||
else
|
|
||||||
ifeq ($(V),1)
|
|
||||||
$(info We seem to be building the example in the source directory. Using local library!)
|
|
||||||
endif
|
|
||||||
endif
|
|
||||||
|
|
||||||
CFLAGS += -O2 -g \
|
ARCH_FLAGS = -mthumb -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16
|
||||||
-Wall -Wextra -Wimplicit-function-declaration \
|
|
||||||
-Wredundant-decls -Wmissing-prototypes -Wstrict-prototypes \
|
################################################################################
|
||||||
-Wundef -Wshadow \
|
# OpenOCD specific variables
|
||||||
-I$(TOOLCHAIN_DIR)/include -fno-common \
|
|
||||||
-mcpu=cortex-m4 -mthumb -MD \
|
|
||||||
-mfloat-abi=hard -mfpu=fpv4-sp-d16 -DLPC43XX
|
|
||||||
LDSCRIPT ?= $(BINARY).ld
|
|
||||||
LDFLAGS += -L$(TOOLCHAIN_DIR)/lib \
|
|
||||||
-T$(LDSCRIPT) -nostartfiles -Wl,--gc-sections -Xlinker -Map=$(BINARY).map
|
|
||||||
OBJS += $(BINARY).o
|
|
||||||
|
|
||||||
OOCD ?= openocd
|
OOCD ?= openocd
|
||||||
OOCD_INTERFACE ?= flossjtag
|
OOCD_INTERFACE ?= flossjtag
|
||||||
OOCD_BOARD ?= olimex_stm32_h103
|
OOCD_BOARD ?= olimex_stm32_h103
|
||||||
|
|
||||||
# Be silent per default, but 'make V=1' will show all compiler calls.
|
################################################################################
|
||||||
ifneq ($(V),1)
|
# Black Magic Probe specific variables
|
||||||
Q := @
|
# Set the BMP_PORT to a serial port and then BMP is used for flashing
|
||||||
NULL := 2>/dev/null
|
BMP_PORT ?=
|
||||||
else
|
|
||||||
LDFLAGS += -Wl,--print-gc-sections
|
|
||||||
endif
|
|
||||||
|
|
||||||
.SUFFIXES: .elf .bin .hex .srec .list .images
|
################################################################################
|
||||||
.SECONDEXPANSION:
|
# texane/stlink specific variables
|
||||||
.SECONDARY:
|
#STLINK_PORT ?= :4242
|
||||||
|
|
||||||
all: images
|
|
||||||
|
|
||||||
images: $(BINARY).images
|
include ../../../Makefile.rules
|
||||||
flash: $(BINARY).flash
|
|
||||||
|
|
||||||
%.images: %.bin %.hex %.srec %.list
|
|
||||||
@#printf "*** $* images generated ***\n"
|
|
||||||
|
|
||||||
%.bin: %.elf
|
|
||||||
@#printf " OBJCOPY $(*).bin\n"
|
|
||||||
$(Q)$(OBJCOPY) -Obinary $(*).elf $(*).bin
|
|
||||||
|
|
||||||
%.hex: %.elf
|
|
||||||
@#printf " OBJCOPY $(*).hex\n"
|
|
||||||
$(Q)$(OBJCOPY) -Oihex $(*).elf $(*).hex
|
|
||||||
|
|
||||||
%.srec: %.elf
|
|
||||||
@#printf " OBJCOPY $(*).srec\n"
|
|
||||||
$(Q)$(OBJCOPY) -Osrec $(*).elf $(*).srec
|
|
||||||
|
|
||||||
%.list: %.elf
|
|
||||||
@#printf " OBJDUMP $(*).list\n"
|
|
||||||
$(Q)$(OBJDUMP) -S $(*).elf > $(*).list
|
|
||||||
|
|
||||||
%.elf: $(OBJS) $(LDSCRIPT) $(TOOLCHAIN_DIR)/lib/libopencm3_lpc43xx.a
|
|
||||||
@#printf " LD $(subst $(shell pwd)/,,$(@))\n"
|
|
||||||
$(Q)$(LD) $(LDFLAGS) -o $(*).elf $(OBJS) -lopencm3_lpc43xx
|
|
||||||
|
|
||||||
%.o: %.c Makefile
|
|
||||||
@#printf " CC $(subst $(shell pwd)/,,$(@))\n"
|
|
||||||
$(Q)$(CC) $(CFLAGS) -o $@ -c $<
|
|
||||||
|
|
||||||
clean:
|
|
||||||
$(Q)rm -f *.o
|
|
||||||
$(Q)rm -f *.d
|
|
||||||
$(Q)rm -f *.elf
|
|
||||||
$(Q)rm -f *.bin
|
|
||||||
$(Q)rm -f *.hex
|
|
||||||
$(Q)rm -f *.srec
|
|
||||||
$(Q)rm -f *.list
|
|
||||||
$(Q)rm -f *.map
|
|
||||||
|
|
||||||
# FIXME: Replace STM32 stuff with proper LPC43XX OpenOCD support later.
|
|
||||||
ifeq ($(OOCD_SERIAL),)
|
|
||||||
%.flash: %.hex
|
|
||||||
@printf " FLASH $<\n"
|
|
||||||
@# IMPORTANT: Don't use "resume", only "reset" will work correctly!
|
|
||||||
$(Q)$(OOCD) -f interface/$(OOCD_INTERFACE).cfg \
|
|
||||||
-f board/$(OOCD_BOARD).cfg \
|
|
||||||
-c "init" -c "reset init" \
|
|
||||||
-c "stm32x mass_erase 0" \
|
|
||||||
-c "flash write_image $(*).hex" \
|
|
||||||
-c "reset" \
|
|
||||||
-c "shutdown" $(NULL)
|
|
||||||
else
|
|
||||||
%.flash: %.hex
|
|
||||||
@printf " FLASH $<\n"
|
|
||||||
@# IMPORTANT: Don't use "resume", only "reset" will work correctly!
|
|
||||||
$(Q)$(OOCD) -f interface/$(OOCD_INTERFACE).cfg \
|
|
||||||
-f board/$(OOCD_BOARD).cfg \
|
|
||||||
-c "ft2232_serial $(OOCD_SERIAL)" \
|
|
||||||
-c "init" -c "reset init" \
|
|
||||||
-c "stm32x mass_erase 0" \
|
|
||||||
-c "flash write_image $(*).hex" \
|
|
||||||
-c "reset" \
|
|
||||||
-c "shutdown" $(NULL)
|
|
||||||
endif
|
|
||||||
|
|
||||||
.PHONY: images clean
|
|
||||||
|
|
||||||
-include $(OBJS:.o=.d)
|
|
||||||
|
|||||||
Reference in New Issue
Block a user