EMTime/libopencm3-examples
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

[stm32f429-discovery] General sweep to fix style according to make stylecheck.

Browse Source
This commit is contained in:
Piotr Esden-Tempski
2015-02-04 20:39:32 -08:00
parent c06aba1603
commit 8c6eb9ca57
26 changed files with 1091 additions and 963 deletions
Download Patch File Download Diff File Expand all files Collapse all files

93
examples/stm32/f4/stm32f429i-discovery/spi/spi-mems.c
View File

@@ -36,21 +36,20 @@ void write_reg(uint8_t reg, uint8_t value);
uint8_t read_xyz(int16_t vecs[3]);
void spi_init(void);
/*
* Chart of the various SPI ports (1 - 6) and where their pins can be:
NSS SCK MISO MOSI
-------------- ------------------- ------------- ---------------
SPI1 PA4, PA15 PA5, PB3 PA6, PB4 PA7, PB5
SPI2 PB9, PB12, PI0 PB10, PB13, PD3, PI1 PB14, PC2, PI2 PB15, PC3, PI3
SPI3 PA15*, PA4* PB3*, PC10* PB4*, PC11* PB5*, PD6, PC12*
SPI4 PE4,PE11 PE2, PE12 PE5, PE13 PE6, PE14
SPI5 PF6, PH5 PF7, PH6 PF8 PF9, PF11, PH7
SPI6 PG8 PG13 PG12 PG14
Pin name with * is alternate function 6 otherwise use alternate function 5.
*
* NSS SCK MISO MOSI
* -------------- ------------------- ------------- ---------------
* SPI1 PA4, PA15 PA5, PB3 PA6, PB4 PA7, PB5
* SPI2 PB9, PB12, PI0 PB10, PB13, PD3, PI1 PB14, PC2, PI2 PB15, PC3, PI3
* SPI3 PA15*, PA4* PB3*, PC10* PB4*, PC11* PB5*, PD6, PC12*
* SPI4 PE4,PE11 PE2, PE12 PE5, PE13 PE6, PE14
* SPI5 PF6, PH5 PF7, PH6 PF8 PF9, PF11, PH7
* SPI6 PG8 PG13 PG12 PG14
*
* Pin name with * is alternate function 6 otherwise use alternate function 5.
*
* MEMS uses SPI5 - SCK (PF7), MISO (PF8), MOSI (PF9),
* MEMS CS* (PC1) -- GPIO
* MEMS INT1 = PA1, MEMS INT2 = PA2
@@ -60,13 +59,14 @@ void put_status(char *m);
/*
* put_status(char *)
*
*
* This is a helper function I wrote to watch the status register
* it decodes the bits and prints them on the console. Sometimes
* the SPI port comes up with the MODF flag set, you have to re-read
* the status port and re-write the control register to clear that.
*/
void put_status(char *m) {
void put_status(char *m)
{
uint16_t stmp;
console_puts(m);
@@ -95,7 +95,7 @@ void put_status(char *m) {
}
console_puts("\n");
}
/*
* read_reg(int reg)
*
@@ -106,10 +106,11 @@ void put_status(char *m) {
* be a more stable solution.
*/
uint16_t
read_reg(int reg) {
read_reg(int reg)
{
uint16_t d1, d2;
d1 = 0x80 | (reg & 0x3f); // Read operation
d1 = 0x80 | (reg & 0x3f); /* Read operation */
/* Nominallly a register read is a 16 bit operation */
gpio_clear(GPIOC, GPIO1);
spi_send(SPI5, d1);
@@ -136,22 +137,23 @@ read_reg(int reg) {
* Then the status register is read and returned.
*/
uint8_t
read_xyz(int16_t vecs[3]) {
read_xyz(int16_t vecs[3])
{
uint8_t buf[7];
int i;
gpio_clear(GPIOC, GPIO1); // CS* select
gpio_clear(GPIOC, GPIO1); /* CS* select */
spi_send(SPI5, 0xc0 | 0x28);
(void) spi_read(SPI5);
for (i = 0; i < 6; i++) {
spi_send(SPI5, 0);
buf[i] = spi_read(SPI5);
}
gpio_set(GPIOC, GPIO1); // CS* deselect
gpio_set(GPIOC, GPIO1); /* CS* deselect */
vecs[0] = (buf[1] << 8 | buf[0]);
vecs[1] = (buf[3] << 8 | buf[2]);
vecs[3] = (buf[5] << 8 | buf[4]);
return read_reg(0x27); // Status register
return read_reg(0x27); /* Status register */
}
/*
@@ -161,13 +163,14 @@ read_xyz(int16_t vecs[3]) {
* selecting it and then writing to it.
*/
void
write_reg(uint8_t reg, uint8_t value) {
gpio_clear(GPIOC, GPIO1); // CS* select
write_reg(uint8_t reg, uint8_t value)
{
gpio_clear(GPIOC, GPIO1); /* CS* select */
spi_send(SPI5, reg);
(void) spi_read(SPI5);
spi_send(SPI5, value);
(void) spi_read(SPI5);
gpio_set(GPIOC, GPIO1); // CS* deselect
gpio_set(GPIOC, GPIO1); /* CS* deselect */
return;
}
@@ -180,7 +183,8 @@ int print_decimal(int);
* number on the console.
*/
int
print_decimal(int num) {
print_decimal(int num)
{
int ndx = 0;
char buf[10];
int len = 0;
@@ -204,7 +208,7 @@ print_decimal(int num) {
console_putc(buf[ndx--]);
len++;
}
return len; // number of characters printed
return len; /* number of characters printed */
}
char *axes[] = { "X: ", "Y: ", "Z: " };
@@ -214,7 +218,8 @@ char *axes[] = { "X: ", "Y: ", "Z: " };
* SPI port, and then shows a continuous display of values on
* the console once you start it. Typing ^C will reset it.
*/
int main(void) {
int main(void)
{
int16_t vecs[3];
int16_t baseline[3];
int tmp, i;
@@ -225,13 +230,13 @@ int main(void) {
console_setup(115200);
/* Enable the GPIO ports whose pins we are using */
rcc_periph_clock_enable(RCC_GPIOF | RCC_GPIOC);
rcc_periph_clock_enable(RCC_GPIOF | RCC_GPIOC);
gpio_mode_setup(GPIOF, GPIO_MODE_AF, GPIO_PUPD_PULLDOWN,
GPIO7 | GPIO8 | GPIO9);
GPIO7 | GPIO8 | GPIO9);
gpio_set_af(GPIOF, GPIO_AF5, GPIO7 | GPIO8 | GPIO9);
gpio_set_output_options(GPIOF, GPIO_OTYPE_PP, GPIO_OSPEED_25MHZ,
GPIO7 | GPIO9);
GPIO7 | GPIO9);
/* Chip select line */
gpio_set(GPIOC, GPIO1);
@@ -239,11 +244,11 @@ int main(void) {
rcc_periph_clock_enable(RCC_SPI5);
cr_tmp = SPI_CR1_BAUDRATE_FPCLK_DIV_8 |\
SPI_CR1_MSTR |\
SPI_CR1_SPE |\
SPI_CR1_CPHA |\
SPI_CR1_CPOL_CLK_TO_1_WHEN_IDLE ;
cr_tmp = SPI_CR1_BAUDRATE_FPCLK_DIV_8 |
SPI_CR1_MSTR |
SPI_CR1_SPE |
SPI_CR1_CPHA |
SPI_CR1_CPOL_CLK_TO_1_WHEN_IDLE;
put_status("\nBefore init: ");
SPI_CR2(SPI5) |= SPI_CR2_SSOE;
@@ -269,25 +274,25 @@ int main(void) {
* temperature reading is correct and the ID code returned is
* as expected so the SPI code at least is working.
*/
write_reg(0x20, 0xcf); // Normal mode
write_reg(0x21, 0x07); // standard filters
write_reg(0x23, 0xb0); // 250 dps
write_reg(0x20, 0xcf); /* Normal mode */
write_reg(0x21, 0x07); /* standard filters */
write_reg(0x23, 0xb0); /* 250 dps */
tmp = (int) read_reg(0x26);
console_puts( "Temperature: ");
console_puts("Temperature: ");
print_decimal(tmp);
console_puts( " C\n");
console_puts(" C\n");
count = 0;
while (1) {
tmp = read_xyz(vecs);
for (i = 0; i < 3; i++) {
int pad;
console_puts( axes[i]);
console_puts(axes[i]);
tmp = vecs[i] - baseline[i];
pad = print_decimal(tmp);
pad = 15 - pad;
while (pad--) {
console_puts( " ");
console_puts(" ");
}
}
console_putc('\r');