stm32f3discovery examples added.

- miniblink
- button
- fancyblink
- adc
- Non tested yet! But they compile.

examples/stm32/f3/stm32f3-discovery/fancyblink/fancyblink.c

@@ -0,0 +1,60 @@
+/*
+ * This file is part of the libopencm3 project.
+ *
+ * Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
+ * Copyright (C) 2011 Damjan Marion <damjan.marion@gmail.com>
+ * Copyright (C) 2011 Mark Panajotovic <marko@electrontube.org>
+ *
+ * This library is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this library.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <libopencm3/stm32/f3/rcc.h>
+#include <libopencm3/stm32/gpio.h>
+
+/* Set STM32 to 64 MHz. */
+void clock_setup(void)
+{
+	rcc_clock_setup_hsi(&hsi_8mhz[CLOCK_64MHZ]);
+
+	/* Enable GPIOE clock. */
+	rcc_peripheral_enable_clock(&RCC_AHBENR, RCC_AHBENR_IOPEEN);
+}
+
+void gpio_setup(void)
+{
+	/* Set GPIO8-11 (in GPIO port E) to 'output push-pull'. */
+	gpio_mode_setup(GPIOE, GPIO_MODE_OUTPUT,
+			GPIO_PUPD_NONE, GPIO8 | GPIO9 | GPIO10 | GPIO11);
+}
+
+int main(void)
+{
+	int i;
+
+	clock_setup();
+	gpio_setup();
+
+	/* Set two LEDs for wigwag effect when toggling. */
+	gpio_set(GPIOE, GPIO8 | GPIO10);
+
+	/* Blink the LEDs (PD8, PD9, PD10 and PD11) on the board. */
+	while (1) {
+		/* Toggle LEDs. */
+		gpio_toggle(GPIOE, GPIO8 | GPIO9 | GPIO10 | GPIO11);
+		for (i = 0; i < 1000000; i++) /* Wait a bit. */
+			__asm__("nop");
+	}
+
+	return 0;
+}