EMTime/libopencm3-examples
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

lm4f: Add basic UART echo example

Browse Source 
Nothing fancy, just a demonstration of the blocking send and recieve.

Also update libopencm3 submodule to include the lm4f UART API.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
This commit is contained in:
Alexandru Gagniuc
2013-05-08 03:17:43 -05:00
parent 0d1008bca3
commit 1a160d794b
4 changed files with 109 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

25
examples/lm4f/stellaris-ek-lm4f120xl/uart_echo_simple/Makefile Normal file
View File

@@ -0,0 +1,25 @@
##
## This file is part of the libopencm3 project.
##
## Copyright (C) 2012 Alexandru Gagniuc <mr.nuke.me@gmail.com>
##
## This library is free software: you can redistribute it and/or modify
## it under the terms of the GNU Lesser General Public License as published by
## the Free Software Foundation, either version 3 of the License, or
## (at your option) any later version.
##
## This library is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU Lesser General Public License for more details.
##
## You should have received a copy of the GNU Lesser General Public License
## along with this library. If not, see <http://www.gnu.org/licenses/>.
##
BINARY = uart_echo_simple
LDSCRIPT = ../ek-lm4f120xl.ld
include ../../Makefile.include

14
examples/lm4f/stellaris-ek-lm4f120xl/uart_echo_simple/README Normal file
View File

@@ -0,0 +1,14 @@
------------------------------------------------------------------------------
README
------------------------------------------------------------------------------
This example demonstrates the ease of setting up the UART with libopencm3.
Basic UART echo is achieved by using blocking reads and writes. The UART is set
up as 921600-8N1.
PA0 is the Rx pin, and PA1 is the Tx pin (from the LM4F perspective). These
pins are connected to the CDCACM interface on the debug chip, so no hardware is
necessary to test this example. Just connect the debug USB cable and use a
terminal program to open the ACM port with 921600-8N1.
For example:
$ picocom /dev/ttyACM0 -b921600

69
examples/lm4f/stellaris-ek-lm4f120xl/uart_echo_simple/uart_echo_simple.c Normal file
View File

@@ -0,0 +1,69 @@
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2011 Gareth McMullin <gareth@blacksphere.co.nz>
* Copyright (C) 2012 Alexandru Gagniuc <mr.nuke.me@gmail.com>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
#include <libopencm3/lm4f/systemcontrol.h>
#include <libopencm3/lm4f/gpio.h>
#include <libopencm3/lm4f/uart.h>
static void uart_setup(void)
{
u32 pins;
/* Enable GPIOA in run mode. */
periph_clock_enable(RCC_GPIOA);
/* Configure PA0 and PA1 as alternate function pins */
pins = GPIO0 | GPIO1;
GPIO_AFSEL(GPIOA) |= pins;
GPIO_DEN(GPIOA) |= pins;
/* PA0 and PA1 are muxed to UART0 during power on, by default */
/* Enable the UART clock */
periph_clock_enable(RCC_UART0);
/* We need a brief delay before we can access UART config registers */
__asm__("nop");
/* Disable the UART while we mess with its setings */
uart_disable(UART0);
/* Configure the UART clock source as precision internal oscillator */
uart_clock_from_piosc(UART0);
/* Set communication parameters */
uart_set_baudrate(UART0, 921600);
uart_set_databits(UART0, 8);
uart_set_parity(UART0, UART_PARITY_NONE);
uart_set_stopbits(UART0, 1);
/* Now that we're done messing with the settings, enable the UART */
uart_enable(UART0);
}
int main(void)
{
u8 rx;
uart_setup();
/*
* Yes, it's that simple !
*/
while(1) {
rx = uart_recv_blocking(UART0);
uart_send_blocking(UART0, rx);
}
return 0;
}

2
libopencm3

Submodule libopencm3 updated: 92d1134a16...4d15da995e