EMTime/libopencm3-examples
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

tiva(stellaris)/lpc: Use directory structure as stm32

Browse Source 
EDIT: Whitespace changes to the files stripped out.
This commit is contained in:
Uwe Bonnes
2014-01-20 13:03:58 +01:00
committed by Frantisek Burian
parent 3af1f8d43d
commit 1740fee230
64 changed files with 5 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files

25
examples/tiva/lm4f/stellaris-ek-lm4f120xl/uart_echo_interrupt/Makefile Normal file
View File

@@ -0,0 +1,25 @@
##
## This file is part of the libopencm3 project.
##
## Copyright (C) 2012 Alexandru Gagniuc <mr.nuke.me@gmail.com>
##
## This library is free software: you can redistribute it and/or modify
## it under the terms of the GNU Lesser General Public License as published by
## the Free Software Foundation, either version 3 of the License, or
## (at your option) any later version.
##
## This library is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU Lesser General Public License for more details.
##
## You should have received a copy of the GNU Lesser General Public License
## along with this library. If not, see <http://www.gnu.org/licenses/>.
##
BINARY = uart_echo_interrupt
LDSCRIPT = ../ek-lm4f120xl.ld
include ../../Makefile.include

18
examples/tiva/lm4f/stellaris-ek-lm4f120xl/uart_echo_interrupt/README Normal file
View File

@@ -0,0 +1,18 @@
------------------------------------------------------------------------------
README
------------------------------------------------------------------------------
This example demonstrates the ease of setting up the UART with libopencm3, and
using UART interrupts. UART echo is achieved by echoing back received characters
from within the interrupt service routine. This has the advantage over using
blocking reads and writes that the main program loop is freed for other tasks.
The UART is set up as 921600-8N1.
PA0 is the Rx pin, and PA1 is the Tx pin (from the LM4F perspective). These
pins are connected to the CDCACM interface on the debug chip, so no hardware is
necessary to test this example. Just connect the debug USB cable and use a
terminal program to open the ACM port with 921600-8N1.
For example:
$ picocom /dev/ttyACM0 -b921600

90
examples/tiva/lm4f/stellaris-ek-lm4f120xl/uart_echo_interrupt/uart_echo_interrupt.c Normal file
View File

@@ -0,0 +1,90 @@
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2011 Gareth McMullin <gareth@blacksphere.co.nz>
* Copyright (C) 2012 Alexandru Gagniuc <mr.nuke.me@gmail.com>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
#include <libopencm3/lm4f/systemcontrol.h>
#include <libopencm3/lm4f/gpio.h>
#include <libopencm3/lm4f/uart.h>
#include <libopencm3/lm4f/nvic.h>
static void uart_setup(void)
{
/* Enable GPIOA in run mode. */
periph_clock_enable(RCC_GPIOA);
/* Mux PA0 and PA1 to UART0 (alternate function 1) */
gpio_set_af(GPIOA, 1, GPIO0 | GPIO1);
/* Enable the UART clock */
periph_clock_enable(RCC_UART0);
/* We need a brief delay before we can access UART config registers */
__asm__("nop");
/* Disable the UART while we mess with its setings */
uart_disable(UART0);
/* Configure the UART clock source as precision internal oscillator */
uart_clock_from_piosc(UART0);
/* Set communication parameters */
uart_set_baudrate(UART0, 921600);
uart_set_databits(UART0, 8);
uart_set_parity(UART0, UART_PARITY_NONE);
uart_set_stopbits(UART0, 1);
/* Now that we're done messing with the settings, enable the UART */
uart_enable(UART0);
}
static void uart_irq_setup(void)
{
/* Gimme and RX interrupt */
uart_enable_rx_interrupt(UART0);
/* Make sure the interrupt is routed through the NVIC */
nvic_enable_irq(NVIC_UART0_IRQ);
}
/*
* uart0_isr is declared as a weak function. When we override it here, the
* libopencm3 build system takes care that it becomes our UART0 ISR.
*/
void uart0_isr(void)
{
uint8_t rx;
uint32_t irq_clear = 0;
if (uart_is_interrupt_source(UART0, UART_INT_RX)) {
rx = uart_recv(UART0);
uart_send(UART0, rx);
irq_clear |= UART_INT_RX;
}
uart_clear_interrupt_flag(UART0, irq_clear);
}
int main(void)
{
gpio_enable_ahb_aperture();
uart_setup();
uart_irq_setup();
/*
* Not worrying about the UART here.
*/
while (1) {
/* Do some other task */
}
return 0;
}